Electrical connector assembly

Depth

• 1-1/2 in
  (1927)

Finish

• Gold
  (1905)
• Tin Plated
  (5)
• Tin Plated Bail
  (15)
• Black
  (2)

Gauge

• 12 Gauge
  (1927)

Length

• 10 ft
  (1927)

Size

• 4 inch (101.6 mm) Center to Center, 6.63 inch (168.4 mm) width, 8.58 inch (218.0 mm) Height to Bushing Datum
  (2)
• 8.46 inch Depth, 2.50 inch Diameter, 4.00 inch Center to Center
  (1)
• 19 inch long Mounting Plate, 9.60 inch Depth, 1.80 inch Diameter, 4.00 inch Center to Center
  (1)
• 9-3/4 inch Maximum length
  (17)
• 7-1/2 inch connector
  (1)
• 17-1/2 inches
  (1)
• 7-1/7 inch connector
  (1)
• 16 inch connector
  (1)
• 4-1/4 inch connector
  (1)
• length 2 inch connector
  (1)
• 4 inch connector
  (1)
• 18 inch connector
  (1)
• 16-1/16 inch connector
  (2)
• 1-1/2 inch connector
  (1)
• 2-9/16 inch connector
  (1)
• 12 inch connector
  (3)
• Overall width 10 inches, Bail Depth 2-3/4 inch x 4-1/2 inch length, bail #2
  (4)
• Overall width 12 inches, Bail Depth 2-3/4 inch x 4-1/2 inch length, bail #2
  (1)
• Overall width 12 inches, Bail Depth 2-7/8 inch x 4-1/2 inch length, bail #1/0
  (1)
• Overall width 10 inches, Bail Depth 2-7/8 inch x 4-1/2 inch length, bail #2/0
  (1)
• Overall width 9-1/2 inches, Bail Depth 2-3/4 inch x 4-1/2 inch length, bail #2
  (1)
• Clamp width 2-3/4 inches, Bail #2
  (1)
• height 2-3/8 inch, length 4-1/4 inch
  (1)
• height 2-3/4 inch, length 4-1/2 inch
  (1)
• width 2-1/8 inch, bail 1/0
  (1)
• width 1-7/8 inch, bail #2
  (3)
• Diameter 2.90 inch (73.7mm)
  (4)
• 3.13 inch (79.4 mm) Diameter, 3.77 inch (95.8 mm) Length Bottom to Bushing Datum, 3.86 inch (98.0 mm) Top to Bushing Datum
  (1)
• 7.00 inch wide (without Probe), 6 foot 600 Volt, 1.0 Stranded, tinned copper ground lead
  (1)
• Body 7.40 inch wide (without Probe), 6 foot 1/0 AWG Ground Lead
  (1)
• 3.38 inch (85.7 mm) Diameter. 10.87 inch (276.20 mm) Length Centerline to Edge
  (18)
• 36.13 inch Wide, 13.93 inch from Bottom of T to Center of Plug
  (2)
• 25.38 inch Wide, 13.93 inch from Bottom of T to Center of Plug
  (5)
• 10.85 inch long x 3 inch Diameter
  (1)
• Overall Length 9.75 inches x Width 3.77 inches not counting Test Point
  (1)
• 9.75 inches long
  (3)
• 37.27 inches long
  (1)
• 3.6 Inches
  (1)
• 4.7 Inches
  (1)
• 5.9 Inches
  (1)
• 9.4 Inches
  (1)
• 7.1 Inches
  (1)
• 9.03 inch (299.4 mm) X 8.20 inch (208.3 mm) not including probe, 2.86 inch (72.6 mm) Diameter
  (37)
• 7.76 inch (197.1 mm) X 9.03 inch (229.4 mm), 2.92 inch (74.2 mm) Diameter
  (42)
• 1.81 inch long
  (1)
• 4.5 inch connector
  (1)
• 11.47 inch End to Center of Installation Eye X 4.13 inch End to Bushing Datum, 2.87 inch Diameter
  (9)
• 9.03 inch (299.4 mm) X 7.89 inch (200.4 mm) not including probe, 2.86 inch (72.6 mm) Diameter
  (17)
• 11.47 inch End to Center of Installation Eye X 8.20 inch width, 2.87 inch Diameter
  (17)
• 11.47 inch length x 8.20 inch width, 2.87 inch Diameter
  (14)
• 2.64 inches long
  (1)
• Cable Insulation Diameter 0.850 inch to 1.050 inch
  (44)
• Cable Insulation Diameter 1.180 inch to 1.465 inch
  (9)
• Cable Insulation Diameter 1.090 inch to 1.310 inch
  (56)
• Cable Insulation Diameter 0.980 inch to 1.180 inch
  (48)
• Width 8.40 inches, Length 11.71 inches from bottom to center of Bushing
  (16)
• Cable Insulation Diameter 0.760 inch to 0.950 inch
  (37)
• Cable Insulation Diameter 0.640 inch to 0.820 inch
  (22)
• Width 12.28 inches, 13.93 inches from Bottom Edge to Center of Installation O-Ring
  (114)
• Cable Insulation Diameter 1.725 inch to 1.935 inch
  (9)
• Cable Insulation Diameter 1.515 inch to 1.780 inch
  (33)
• Cable Insulation Diameter 1.180 inch to 1.465 inch
  (31)
• Cable Insulation Diameter 1.900 inch to 2.120 inch
  (2)
• Width 7.95 inches, Length 11.71 inches from bottom to center of Bushing
  (26)
• Cable Insulation Diameter 1.370 inch to 1.630 inch
  (32)
• Cable Insulation Diameter 1.725-1.935 inches
  (1)
• Cable Insulation Diameter 0.635 inch to 0.905 inch
  (3)
• Cable Insulation Diameter 1.370-1.630 inches,
  (1)
• Cable Insulation Diameter 0.890 inch to 1.220 inch
  (1)
• Cable Insulation Diameter 0.805 inch to 1.060 inch
  (1)
• Cable Insulation Diameter Range 1.090 to 1.310 inch,
  (1)
• Cable Insulation Diameter 1.090-1.310 inches
  (4)
• Cable Insulation Diameter 1.090 to 1.310 inches (27.686 to 33.274 mm)
  (1)
• Cable Insulation Diameter 0.575 inch to 0.740 inch
  (1)
• 2.74 inch wide x 9.54 inches long
  (40)
• 2.55 inch wide x 8.81 inches long
  (39)
• Width 7.10 inch, Length 11.70 inch from bottom to center of probe
  (24)
• Width 7.55 inches, Length 10.74 inches from bottom to center of Bushing
  (11)
• Cable Insulation Diameter 1.090-1.310 inches,
  (8)
• Cable Insulation Diameter .635-.905 inches
  (1)
• Cable Insulation Diameter - .805-1.060 inch
  (4)
• Cable Insulation Diameter - .635-.905 inch
  (2)
• Cable Insulation Diameter .575-.740 inches
  (1)
• Cable Insulation Diameter .805-1.060 inches
  (1)
• Width 10.36 inch, Length 13.00 inch from Body of T-Body to Center of Bushing
  (304)
• .635 inch - .905 inch Cable Insulation Diameter
  (1)
• Cable Insulation 1.280-1.430 inches
  (1)
• Cable Insulation 1.090-1.310 inches,
  (1)
• .890 inch - 1.220 Inch Cable Insulation Diameter
  (1)
• Cable Insulation 1.180-1.465 inches
  (1)
• Cable Insulation Diameter 0.850 inch to 1.050 inch
  (1)
• Width 10.36 inch x Length 13.00 inch from Center of Bushing Insert to T-Body Bottom
  (22)
• 12.28 inch Wide, 13.93 inch from bottom edge to Center of Installation O-Ring
  (29)
• Cable Insulation Diameter 0.980 inch to 1.180 inch
  (1)
• Length 21.12 inches from bottom to center of Bushing
  (37)
• Length 16.87 inches from bottom to center of Bushing
  (54)
• Approximately 9-1/4 inch wide x 17 inches long
  (15)
• Approximately 8-7/8 inch wide x 21 inches long
  (9)
• Approximately 8-7/8 inch wide x 17 inches long
  (15)
• Approximately 9-1/4 inch wide x 21 inches long
  (1)
• Length 7.531 inch from bottom edge to center of Installation O-Ring. Width 5.454 inch
  (26)
• 10.36 inch X 13.00 inch from bottom to centerline of bushing, 3.38 inch Diameter
  (4)
• 9.49 inch X 7.56 inch from bottom to center of Installation O-Ring, 3.16 inch Diameter
  (2)
• 7.56 inch X 8.70 inch from bottom to center of Installation O-Ring, 3.16 inch Diameter
  (1)
• 8.20 inch X 11.47 inch from bottom to center of Installation O-Ring, 2.86 inch Diameter
  (2)
• 8.20 inch (208.3 mm) X 9.03 inch (229.4 mm), 2.86 inch (72.6 mm) Diameter
  (5)
• 13.31 inches width, 10.88 inch bottom edge to center of bushing
  (94)
• Cable Insulation Diameter 1.370-1.630,
  (1)
• Width 10.36 inch. Length 13.00 inch from Bottom Edge to Center of Installation O-Ring
  (25)
• Body Width without Probe 7.95 inches. Length 18.00 inches from Bottom Edge to Center of Installation O-Ring
  (2)
• Body Width without Probe 7.63 inches. Length 18.00 inches from Bottom Edge to Center of Installation O-Ring
  (1)
• Width 10.36 inches, Length 13.00 inches from Bottom Edge to Center of Installation O-Ring
  (29)
• Length 31.56 inches
  (27)
• Length 9.54 inches
  (9)
• Length 22.30 inches
  (13)
• Cable Insulation Diameter 0.980-1.180 inches
  (8)
• Cable Insulation Diameter 1.280 inch to 1.430 inch
  (1)
• 10.88 inch from Bottom to Center of Bushing, 8.34 inch wide
  (2)
• Width 10.36 inch, Length 13.00 inch from Bottom of T-Body to Center of Bushing
  (1)
• Length 9.03 inches, Width (without Probe) 7.44 inches
  (1)
• T-Body 12.23 inch wide. 14.30 inch from bottom of T-Body to center of Bushing Interface entrance
  (4)
• Diameter 4.19 inch x Length 16.98 inch
  (54)
• Overall Length 37.27 inches
  (37)
• Overall Length 37.27 inches x Width 8.12 inches not counting 1 inch Test Point
  (60)
• Length 16.98 inch x 4.19 inch Diameter
  (45)
• Overall Length 37.27 inches, Width 8.12 inches not counting 1 inch Test Point
  (23)
• 4.40 inch x 9.54 inch long x 2.10 inch Diameter
  (2)
• 10 inches Wide, 10.87 inches from bottom to center of Plug
  (3)
• Cable Insulation Diameter - .635 to .905 inch
  (1)
• 9.03 inch x 7.76 inch not counting probe
  (1)
• 9.03 inches Long x 7.89 inch Wide
  (1)
• T-Body Width 10.16 inch, T-Body Length Bottom to Centerline 13.93 inch
  (1)
• 20.50 inches from edge of Lever to Bushing Flange
  (8)
• 10.36 inch Wide x 13.00 inch from bottom to center of Bushing
  (24)
• 20.80 inch Wide, 10.87 inch from Bottom of T to Center of Plug
  (5)
• 10.87 inch from Bottom of T to Center of Plug
  (4)
• 33.72 inches long
  (1)
• 33.75 inches long
  (1)
• Bushing 7.17 inch Length 2.90 inch Diameter. Elbow 7.76 inch x 9.03 inch
  (7)
• 6.90 inch Wide x 12.00 inch Long
  (1)
• Width 7.10 inch, Length 11.70 inch from bottom to center of Bushing
  (1)
• 12.28 inch wide
  (1)
• 9.49 inch wide (not counting probe)
  (1)
• 10.36 inch (264.1mm) x 13 inch (330.2mm) from Bottom to Center of Bushing
  (5)
• T-Body 8.34 inch wide x 10.88 inch from end to center of Bushing
  (1)
• Width 10.36 inWidth 10.36 inch, Length 13.00 inch from Body of T-Body to Center of Bushing.ch, Length 13.00 inch from Body of T-Body to Center of Bushing
  (1)
• 12.29 inch wide x 13.93 inch long from bottom edge to Center of Probe
  (1)
• 2.74 in wide x 9.54 in long
  (1)
• 2.55 inch wide x 8.81 inches longch wide x 8.81 inches long
  (1)
• Body 10.16 inch wide x 13.93 long from bottom of edge to center of bushing insert
  (1)
• Length 7.531 inch from bottom edge to center of Installation O-Ring. Width 5.454 inch.nch from bottom edge to center of Installation O-Ring. Width 5.454 inch
  (1)
• Vault Stretcher Housing 21.75 inches x 8.69 inch
  (1)
• 10.00 inches Wide x 10.87 inches Bottom Edge to Center of Bushing
  (1)
• Splice Length 3 in
  (1)
• Splice Length 61/64 in
  (1)
• 1-15/64 x 3/4 x 1-1/8 in
  (1)
• 1-11/32 inch long x 55/64 inch x 55/64 inch
  (1)
• Connector 1-11/32 x 55/64 x 55/64 in
  (1)
• Rocket 5-39/64 inch long x 1-5/8 inch
  (1)
• 9 in x 8.2 in
  (1)
• Depth 9-1/2 in
  (1)
• Width 10.36 inch, Length 13 inch from bottom edge to Center of Bushing. Diameter 3.83 inch
  (1)
• Width 12.28 inch, Length 13.93 inch from bottom edge to Center of Bushing. Diameter 3.83 inch
  (1)
• Cable Insulatio Diameter M - 1.37 to 1.63 inch
  (1)
• Width 8.2 inch , Length Bottom Edge to Bushing Center 11.47 in
  (1)
• Finished Cables 12 in
  (2)
• Cable Insulation Diameter 0.980 inch to 1.18 inch
  (1)
• Elbow 12.5 inch long
  (2)
• Length 17 in
  (1)
• 12.29 in wide x 13.93 inch from Bottom to center of Bushing
  (1)
• Width 10.6 inch, Length 13.00 inch from Body of T-Body to Center of Bushing
  (1)
• Cable Insulation Diameter 1.725 in to 1.935 in
  (1)
• ANSI/IEEE Standard 386
  (1)
• 17 inch long , 4.19 inch widest Diameter
  (1)

Width

• 1-1/2 in
  (1927)

Manufacturers