Multimeters

Accessory

• (1) 9V battery, bead temperature probe (400°F/ 204°C max.), test leads, protective boot, carrying case
  (2)

Amperage Measurement

• 600, 6000μA; 60, 600mA; 6, 8A
  (4)
• 600, 6000 MICAMP, 60, 600 MILAMP, 6, 8 AMP
  (1)
• 600, 6000μA; 60, 600mA; 6, 10A
  (6)
• 600, 6000μA; 60, 600 mA; 6, 8A
  (1)

Conductance

• 99.99 nS
  (6)

Counts

• 4000
  (1)
• 6000
  (1)
• 2000
  (1)

Duty Cycle

• 5 - 95 PCT
  (1)

Field Replaceable Fuses

• Yes
  (2)
• No
  (1)

Frequency Measurement

• 10Hz - 50kHz Sine Wave, 5Hz - 999.9kHz Logic Level Square Wave
  (4)
• 10 HZ - 50 KHZ Sine Wave, 5 HZ - 999.9 KHZ Logic Level Square Wave
  (1)
• 15Hz- 50kHz Sine Wave, 5Hz - 1MHz Logic Level Square Wave
  (6)
• 10Hz - 50kHz Sine Wave, 5Hz- 999.9kHz Logic Level Square Wave
  (1)

Hardware Requirements

• Windows 7/Vista/XP/2000/NT4 Or Windows ME/98/95
  (2)

Includes

• (1) 3 V Battery (CR2032), Carrying Case
  (1)
• (2) 1.5V AAA Batteries, Bead Temperature Probe (DM-210A, DM-510A Only, 400 DEG F/204 DEG C max), Test leads, ProtectiveBoot
  (4)
• (2) 1.5V AAA Batteries, Bead Temperature Probe (DM-210A, DM-510A Only, 400°F/204°C max), Test leads, ProtectiveBoot
  (1)
• (1) 9V Battery, Bead Temperature Probe (DM-820A, DM-830A Only, 400°F/204°C Max), Test Leads, Protective Boot, Carrying Case
  (4)
• (1) 9V Battery, Bead Temperature Probe (DM-820A, DM-830A Only, 400 DEG F/204 DEG C Max), Test Leads, Protective Boot, Carrying Case
  (2)
• (2) 1.5V AAA Batteries, Bead Temperature Probe (DM-210A, DM-510A Only, 400°F/204°C max), Test leads, Protective Boot
  (1)
• Calibration loop
  (2)

Jaw Opening

• 1.4"
  (2)

Measurement Category

• CAT II, 450 V, CAT III, 300 V
  (1)
• CAT IV 300 V, CAT III 600 V, CAT II 1000 V
  (6)
• CAT IV, 1000 V
  (6)
• Cat IV: 600V
  (1)
• Cat IV: 600V
  (1)

Operation Type

• Hand Held
  (2)

Replacement Part

• TSG-3 Sure-Grip Test Leads
  (6)
• TC-20 Carrying Case, TSG-3 Sure-Grip Test Leads, TPB Bead Temperature Probe (Included With DM-820A, DM-830A)
  (6)
• TC-20, Carrying Case (included), TSG-3, Sure-Grip Test Leads
  (2)
• Calibration Loop CMGRT-CL
  (2)

Resistance Measurement

• 600 Ω, 6, 60, 600 kΩ, 6 MΩ
  (1)
• 600 Ω; 6, 60, 600 kΩ; 6, 60 MΩ
  (2)
• 600 OHM, 6, 60, 600 KOHM, 6, 60 MOHM
  (1)
• 600Ω; 6, 60, 600 kΩ; 6, 60 MΩ
  (9)
• .1 to 1500 ohms
  (2)

Software Requirements

• CPU And Memory - Minimum Windows Requirement, Monitor - At Least 640 X 480, 800 X 600 Recommended, Hard Disk - At Least 20 Megabytes Free Space, Connection - DMSC-9U: Free USB Port DMSC-2U: Free USB Or 9-PinSerial Port DMSC-9: Free 9-Pin Serial Port
  (2)

Voltage Measurement

• 6, 60, 450 V
  (1)
• 60, 600 mV; 6, 60, 600, 1000V
  (4)
• 60, 600 MILV, 6, 60, 600, 1000 V
  (1)
• 60, 600 mV, 6, 60, 600, 1000V
  (1)
• 60, 600 mV, 9.999, 99.99, 999.9 V
  (2)
• 60, 600 mV; 9.999, 99.99, 999.9 V
  (4)

Manufacturers