Electrical conduit coupling

Cable Range

• 0.402 - 0.610 in
  (1)
• 0.470 - 0.610 in
  (1)
• Steel 0.460-0.611 in
  (2)

Certified Listed

• Buy America Compliant, Buy American Act Compliant, BABA Compliant (All status valid till December 2024)
  (1)
• cULus Listed
  (160)
• UL Listed
  (110)
• UL Listed;CSA Certified
  (94)

Classification

• DB60
  (24)
• Sch40
  (2)
• Schedule 40
  (1)

Coating

• Galvanized
  (1)

Collection Name

• THE INSIDER
  (1)

Color

• Black
  (17)
• Gray
  (4)
• Green
  (9)
• Grey and Copper
  (1)
• Hot Dip Galvanized
  (19)
• Metallic
  (1)
• Natural White
  (1)
• Red
  (10)
• Silver
  (55)
• White
  (10)
• Yellow
  (2)

Conduit Type

• Armored Cable/Metal Clad (AC/MC)
  (11)
• EMT
  (184)
• Flexible Metal Conduit
  (61)
• Flexible Metal Conduit;Armored Cable/Metal Clad (AC/MC)
  (11)
• Liquidtight
  (6)
• Nonmetallic Sheathed Cable (NMSC)
  (2)
• Rigid/IMC
  (63)
• Service Entrance
  (19)

Connection

• 1 NPSM
  (1)
• 1-1/2 NPSM
  (1)
• 1-1/4 NPSM
  (1)
• 1/2 NPSM
  (1)
• 2 NPSM
  (1)
• 2-1/2 NPSM
  (1)
• 3 NPSM
  (1)
• 3-1/2 NPSM
  (1)
• 3/4-14 NPT Hub X 1/2-14 NPT Junction Box
  (1)
• 4 NPSM
  (1)
• 5 NPSM
  (1)
• 6 NPSM
  (1)
• Compression
  (75)
• Compression X FNPT Hub
  (13)
• Compression X Screw Clamp
  (7)
• Compression x Threaded
  (3)
• Female Threaded
  (174)
• FNPT
  (11)
• FNPT Hub
  (7)
• FNPT Hub X Screw Clamp
  (1)
• Male Nipple
  (11)
• Male Nipple X Female Union
  (8)
• Male Threaded
  (6)
• Male Threaded X Female Threaded
  (21)
• NPSM Threaded
  (15)
• Screw In
  (5)
• Screw to Clamp
  (1)
• Screw-In
  (2)
• Set Screw
  (49)
• Set Screw X Screw Clamp
  (3)
• Set Screw X Threaded
  (1)
• Set-Screw
  (22)
• Set-Screw X Screw Clamp
  (1)
• Slip-On
  (5)
• Tapered Female Threaded X Tapered Male Threaded
  (4)
• Tapered FNPT
  (17)
• Tapered FNPT X MNPT
  (13)
• Tapered Threads NPT
  (1)
• Threaded
  (29)
• Threadless
  (2)

Connector Type

• Combination
  (24)
• Compression
  (26)
• Made in USA Compression
  (10)
• Raintight Compression
  (12)
• Raintight, 3 Piece self Aligning
  (10)
• Screw-In
  (6)
• Set Screw
  (35)
• Three-piece Conduit
  (10)
• Transition
  (5)
• Two Screw, Strap Type
  (1)

Construction

• Steel
  (1)

Current Rating

• Conforms to Article 356 of 2005 NEC
  (3)
• NEMA TC-3 Compliant
  (1)

Depth

• 1-1/2 in
  (12)

Description - Long

• 0.5 in to 1 in Ground Clamp for 0.5 in Rigid Conduit, Bronze Alloy
  (1)
• 0.5 in to 1 in Ground Clamp for 0.75 in Rigid Conduit, Bronze Alloy
  (1)
• 0.5 in to 1 in Ground Clamp for Bare Armored Ground Wires, Bronze Alloy
  (1)
• 0.5 in to 1 in Ground Clamp, for Bare Ground Wires, Bronze Alloy
  (1)
• 1 in. 90 Degree Flex Squeeze Connector, Insulated
  (1)
• 1 in. 90 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 1 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable.
  (1)
• 1 in. EMT Compression Connector, Insulated
  (2)
• 1 in. EMT Compression Connector, Uninsulated
  (3)
• 1 in. EMT Compression Coupling
  (3)
• 1 in. EMT or 3/4 in. Rigid/IMC Clamp Back
  (1)
• 1 in. EMT Raintight Compression Connector, Insulated
  (1)
• 1 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 1 in. EMT Raintight Compression Coupling
  (1)
• 1 in. EMT Set-Screw Connector, Insulated
  (2)
• 1 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 1 in. EMT Set-Screw Coupling
  (2)
• 1 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 1 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 1 in. Flex to 1 in. EMT Screw-In/Compression Coupling
  (1)
• 1 in. Flex/AC Straight Squeeze Connector, Uninsulated
  (1)
• 1 in. Rigid/IMC 3-Piece Coupling
  (1)
• 1 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 1 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 1 in. Rigid/IMC Compression Coupling
  (1)
• 1 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 1 in. Rigid/IMC or EMT Set-Screw Coupling
  (1)
• 1 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 1 in. Rigid/IMC Set-Screw Coupling
  (1)
• 1 in. Rigid/IMC to Flex Combination Coupling
  (1)
• 1 in. Sealing Washer
  (1)
• 1 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 1 in. to 1/2 in. Reducing Washer
  (1)
• 1 in. to 3/4 in. Reducing Washer
  (1)
• 1-1/2 in. 90 Degree Flex Squeeze Connector, Insulated
  (1)
• 1-1/2 in. 90 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 1-1/2 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable.
  (1)
• 1-1/2 in. EMT Compression Connector, Insulated
  (2)
• 1-1/2 in. EMT Compression Connector, Uninsulated
  (3)
• 1-1/2 in. EMT Compression Coupling
  (3)
• 1-1/2 in. EMT or 1-1/4 in. Rigid/IMC Clamp Back
  (1)
• 1-1/2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 1-1/2 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 1-1/2 in. EMT Raintight Compression Coupling
  (1)
• 1-1/2 in. EMT Set-Screw Connector, Insulated
  (2)
• 1-1/2 in. EMT Set-Screw Connector, Uninsulated
  (1)
• 1-1/2 in. EMT Set-Screw Coupling
  (3)
• 1-1/2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 1-1/2 in. Flex Straight Squeeze Connector, Uninsulated
  (2)
• 1-1/2 in. Offset 3/4 in. Nipple
  (1)
• 1-1/2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 1-1/2 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 1-1/2 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 1-1/2 in. Rigid/IMC Compression Coupling
  (1)
• 1-1/2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 1-1/2 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 1-1/2 in. Rigid/IMC Set-Screw Coupling
  (1)
• 1-1/2 in. Sealing Washer
  (1)
• 1-1/2 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 1-1/2 in. to 1 in. Reducing Washer
  (1)
• 1-1/2 in. to 1-1/4 in. Reducing Washer
  (1)
• 1-1/2 in. to 1/2 in. Reducing Washer
  (1)
• 1-1/2 in. to 3/4 in. Reducing Washer
  (1)
• 1-1/4 in. 90 Degree Flex Squeeze Connector, Insulated
  (1)
• 1-1/4 in. 90 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 1-1/4 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable.
  (1)
• 1-1/4 in. EMT Compression Connector, Insulated
  (2)
• 1-1/4 in. EMT Compression Connector, Uninsulated
  (2)
• 1-1/4 in. EMT Compression Coupling
  (2)
• 1-1/4 in. EMT Raintight Compression Connector, Insulated
  (1)
• 1-1/4 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 1-1/4 in. EMT Raintight Compression Coupling
  (1)
• 1-1/4 in. EMT Set-Screw Connector, Insulated
  (2)
• 1-1/4 in. EMT Set-Screw Connector, Uninsulated
  (1)
• 1-1/4 in. EMT Set-Screw Coupling
  (2)
• 1-1/4 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 1-1/4 in. Flex Straight Squeeze Connector, Uninsulated
  (2)
• 1-1/4 in. Offset 3/4 in. Nipple
  (1)
• 1-1/4 in. Rigid/IMC 3-Piece Coupling
  (1)
• 1-1/4 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 1-1/4 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 1-1/4 in. Rigid/IMC Compression Coupling
  (1)
• 1-1/4 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 1-1/4 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 1-1/4 in. Rigid/IMC Set-Screw Coupling
  (1)
• 1-1/4 in. Sealing Washer, 5 per bag
  (1)
• 1-1/4 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 1-1/4 in. to 1 in. Reducing Washer
  (1)
• 1-1/4 in. to 1/2 in. Reducing Washer
  (1)
• 1-1/4 in. to 3/4 in. Reducing Washer
  (1)
• 1.25 in to 2 in Ground Clamp for 0.5 in Rigid Conduit, Bronze Alloy
  (1)
• 1.25 in to 2 in Ground Clamp for Bare Armored Ground Wires, Bronze Alloy
  (1)
• 1.25 in to 2 in Ground Clamp, for Bare Ground Wires, Bronze Alloy
  (1)
• 1.5 in to 1 in Ground Clamp, for Bare Ground Wires, Bronze Alloy
  (1)
• 1/2 in. 45 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 1/2 in. 90 Degree Flex/AC Squeeze Connector, Insulated
  (1)
• 1/2 in. 90 Degree Flex/AC Squeeze Connector, Uninsulated
  (1)
• 1/2 in. EMT 2-piece Connector
  (1)
• 1/2 in. EMT 90 Short Angle Connector
  (1)
• 1/2 in. EMT Compression Connector, Insulated
  (2)
• 1/2 in. EMT Compression Connector, Uninsulated
  (3)
• 1/2 in. EMT Compression Coupling
  (2)
• 1/2 in. EMT Indenter Connector, Insulated
  (1)
• 1/2 in. EMT Indenter Connector, Uninsulated
  (1)
• 1/2 in. EMT Indenter Coupling
  (1)
• 1/2 in. EMT Offset Compression Connector
  (1)
• 1/2 in. EMT Offset Connector
  (1)
• 1/2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 1/2 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 1/2 in. EMT Raintight Compression Coupling
  (1)
• 1/2 in. EMT Set-Screw Connector, Insulated
  (1)
• 1/2 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 1/2 in. EMT Set-Screw Coupling
  (2)
• 1/2 in. Flex Screw-In Connector
  (1)
• 1/2 in. Flex Screw-In Coupling
  (1)
• 1/2 in. Flex Set-Screw Connector
  (1)
• 1/2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 1/2 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 1/2 in. Flex to 1/2 in. EMT Screw-In/Compression Coupling
  (1)
• 1/2 in. Flex to 1/2 in. EMT Squeeze/Compression Coupling
  (1)
• 1/2 in. Flex/AC 90 Degree Squeeze Connector, Uninsulated, for FMC/AC/MC Cable.
  (1)
• 1/2 in. Flex/AC Straight Squeeze Connector, Uninsulated
  (1)
• 1/2 in. MCI/MCI-A/AC/HCF Cable Connector
  (1)
• 1/2 in. REDI-LOC AC/MC Cable Connector
  (2)
• 1/2 in. REDI-LOC AC/MC Duplex Cable Connector
  (1)
• 1/2 in. REDI-LOCII AC/MC Cable Connector
  (1)
• 1/2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 1/2 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 1/2 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 1/2 in. Rigid/IMC Compression Coupling
  (1)
• 1/2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 1/2 in. Rigid/IMC or EMT Set-Screw Coupling
  (1)
• 1/2 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 1/2 in. Rigid/IMC Set-Screw Coupling
  (1)
• 1/2 in. Rigid/IMC to Flex Combination Coupling
  (1)
• 1/2 in. Sealing Washer
  (1)
• 1/2 in. THE INSIDER Nonmetallic Sheathed Cable Connector
  (1)
• 2 in. 90 Degree Flex Squeeze Connector, Insulated
  (1)
• 2 in. 90 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 2 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable.
  (1)
• 2 in. EMT Compression Connector, Insulated
  (3)
• 2 in. EMT Compression Connector, Uninsulated
  (3)
• 2 in. EMT Compression Coupling
  (3)
• 2 in. EMT or 1-1/2 in. Rigid/IMC Clamp Back
  (1)
• 2 in. EMT or Rigid/IMC Clamp Back
  (1)
• 2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 2 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 2 in. EMT Raintight Compression Coupling
  (1)
• 2 in. EMT Set-Screw Connector, Insulated
  (2)
• 2 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 2 in. EMT Set-Screw Coupling
  (3)
• 2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 2 in. Flex Straight Squeeze Connector, Uninsulated
  (2)
• 2 in. Offset 3/4 in. Nipple
  (1)
• 2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 2 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 2 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 2 in. Rigid/IMC Compression Coupling
  (1)
• 2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 2 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 2 in. Rigid/IMC Set-Screw Coupling
  (1)
• 2 in. Sealing Washer
  (1)
• 2 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 2 in. to 1 in. Reducing Washer
  (1)
• 2 in. to 1-1/2 in. Reducing Washer
  (1)
• 2 in. to 1-1/4 in. Reducing Washer
  (1)
• 2 in. to 3/4 in. Reducing Washer
  (1)
• 2-1/2 EMT in. Compression Coupling
  (1)
• 2-1/2 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable.
  (1)
• 2-1/2 in. EMT Compression Connector, Insulated
  (3)
• 2-1/2 in. EMT Compression Connector, Uninsulated
  (2)
• 2-1/2 in. EMT Compression Coupling
  (2)
• 2-1/2 in. EMT or Rigid/IMC Clamp Back
  (1)
• 2-1/2 in. EMT or Rigid/IMC Set-Screw Connector, Insulated
  (2)
• 2-1/2 in. EMT or Rigid/IMC Set-Screw Coupling
  (2)
• 2-1/2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 2-1/2 in. EMT Raintight Compression Coupling
  (1)
• 2-1/2 in. EMT Set-Screw Connector, Uninsulated
  (1)
• 2-1/2 in. EMT Set-Screw Coupling
  (1)
• 2-1/2 in. Flex Squeeze Connector, Insulated
  (1)
• 2-1/2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 2-1/2 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 2-1/2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 2-1/2 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 2-1/2 in. Rigid/IMC Compression Coupling
  (1)
• 2-1/2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 2-1/2 in. to 1 in. Reducing Washer
  (1)
• 2-1/2 in. to 1-1/4 in. Reducing Washer
  (1)
• 2-1/2 in. to 2 in. Reducing Washer
  (1)
• 2-1/2. to 1-1/2 in. Reducing Washer
  (1)
• 3 EMT in. Compression Coupling
  (1)
• 3 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable.
  (1)
• 3 in. EMT Compression Connector, Insulated
  (2)
• 3 in. EMT Compression Connector, Uninsulated
  (2)
• 3 in. EMT Compression Coupling
  (2)
• 3 in. EMT or Rigid/IMC Set-Screw Connector, Insulated
  (2)
• 3 in. EMT or Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 3 in. EMT or Rigid/IMC Set-Screw Coupling
  (2)
• 3 in. EMT Raintight Compression Connector, Insulated
  (1)
• 3 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 3 in. EMT Raintight Compression Coupling
  (1)
• 3 in. EMT Set-Screw Connector, Insulated
  (1)
• 3 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 3 in. EMT Set-Screw Coupling
  (1)
• 3 in. Flex Squeeze Connector, Insulated
  (1)
• 3 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 3 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 3 in. Rigid/IMC 3-Piece Coupling
  (1)
• 3 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 3 in. Rigid/IMC Compression Coupling
  (1)
• 3 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 3 in. to 1-1/2 in. Reducing Washer
  (1)
• 3 in. to 1-1/4 in. Reducing Washer
  (1)
• 3 in. to 2 in. Reducing Washer
  (1)
• 3 in. to 2-1/2 in. Reducing Washer
  (1)
• 3-1/2 EMT in. Compression Coupling
  (1)
• 3-1/2 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable.
  (1)
• 3-1/2 in. EMT Compression Connector, Insulated
  (2)
• 3-1/2 in. EMT Compression Connector, Uninsulated
  (2)
• 3-1/2 in. EMT Compression Coupling
  (1)
• 3-1/2 in. EMT or Rigid/IMC Clamp Back
  (1)
• 3-1/2 in. EMT or Rigid/IMC Set-Screw Connector, Insulated
  (2)
• 3-1/2 in. EMT or Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 3-1/2 in. EMT or Rigid/IMC Set-Screw Coupling
  (1)
• 3-1/2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 3-1/2 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 3-1/2 in. EMT Raintight Compression Coupling
  (1)
• 3-1/2 in. EMT Set-Screw Connector, Insulated
  (1)
• 3-1/2 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 3-1/2 in. EMT Set-Screw Coupling
  (1)
• 3-1/2 in. Flex Squeeze Connector, Insulated
  (1)
• 3-1/2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 3-1/2 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 3-1/2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 3-1/2 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 3-1/2 in. Rigid/IMC Compression Coupling
  (1)
• 3-1/2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 3-1/2 in. to 2 in. Reducing Washer
  (1)
• 3-1/2 in. to 2-1/2 in. Reducing Washer
  (1)
• 3-1/2 in. to 3 in. Reducing Washer
  (1)
• 3/4 in. 90 Degree Flex/AC Squeeze Connector, Insulated
  (1)
• 3/4 in. 90 Degree Flex/AC Squeeze Connector, Uninsulated
  (1)
• 3/4 in. EMT 2-piece Connector
  (1)
• 3/4 in. EMT 90 Short Angle Connector
  (1)
• 3/4 in. EMT Compression Connector, Insulated
  (2)
• 3/4 in. EMT Compression Connector, Uninsulated
  (2)
• 3/4 in. EMT Compression Coupling
  (2)
• 3/4 in. EMT Indenter Connector, Insulated
  (1)
• 3/4 in. EMT Offset Compression Connector
  (1)
• 3/4 in. EMT Offset Connector
  (1)
• 3/4 in. EMT or 1/2 in. Rigid/IMC Clamp Back
  (1)
• 3/4 in. EMT or Rigid/IMC Compression Threaded Coupling
  (1)
• 3/4 in. EMT Raintight Compression Connector, Insulated
  (1)
• 3/4 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 3/4 in. EMT Raintight Compression Coupling
  (1)
• 3/4 in. EMT Set-Screw Connector, Insulated
  (2)
• 3/4 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 3/4 in. EMT Set-Screw Coupling
  (1)
• 3/4 in. Flex Screw-In Connector
  (1)
• 3/4 in. Flex Screw-In Coupling
  (1)
• 3/4 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 3/4 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 3/4 in. Flex to 3/4 in. EMT Screw-In/Compression Coupling
  (1)
• 3/4 in. Flex to 3/4 in. EMT Squeeze/Compression Coupling
  (1)
• 3/4 in. Flex/AC 90 Degree Squeeze Connector, Uninsulated, for FMC/AC/MC Cable.
  (1)
• 3/4 in. Flex/AC Straight Squeeze Connector, Uninsulated
  (1)
• 3/4 in. MCI/AC/HCF Cable Connector
  (1)
• 3/4 in. Offset 3/4 in. Nipple
  (1)
• 3/4 in. REDI-LOC AC/MC Cable Connector
  (1)
• 3/4 in. Rigid/IMC 3-Piece Coupling
  (1)
• 3/4 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 3/4 in. Rigid/IMC Compression Coupling
  (1)
• 3/4 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 3/4 in. Rigid/IMC or EMT Set-Screw Coupling
  (1)
• 3/4 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 3/4 in. Rigid/IMC Set-Screw Coupling
  (1)
• 3/4 in. Rigid/IMC to Flex Combination Coupling
  (1)
• 3/4 in. Sealing Washer
  (1)
• 3/4 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 3/4 in. to 1/2 in. Reducing Washer
  (1)
• 3/8 in. 90 Degree Flex/AC Squeeze Connector, Uninsulated
  (1)
• 3/8 in. 45 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 3/8 in. 90 Degree Flex/AC Squeeze Connector, Insulated
  (1)
• 3/8 in. 90 Degree Squeeze Connector, Uninsulated, for FMC/AC/MC Cable.
  (1)
• 3/8 in. Armored Cable Connector, .402-.610
  (1)
• 3/8 in. Armored Cable Connector, .470- .610
  (1)
• 3/8 in. Flex Screw-In Connector
  (1)
• 3/8 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 3/8 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 3/8 in. Flex to 1/2 in. EMT Squeeze/Compression Coupling
  (1)
• 3/8 in. Flex/AC Cable Set-Screw Connector
  (1)
• 3/8 in. Flex/AC Straight Squeeze Connector, Uninsulated
  (1)
• 3/8 in. Flex/AC/MC Duplex Connector
  (1)
• 3/8 in. Flex/AC/MC/NMSC Clamp Type Connector
  (1)
• 4 EMT in. Compression Coupling
  (1)
• 4 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable.
  (1)
• 4 in. EMT Compression Connector, Insulated
  (3)
• 4 in. EMT Compression Connector, Uninsulated
  (3)
• 4 in. EMT Compression Coupling
  (2)
• 4 in. EMT or Rigid/IMC Clamp Back
  (1)
• 4 in. EMT or Rigid/IMC Set-Screw Connector, Insulated
  (2)
• 4 in. EMT or Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 4 in. EMT or Rigid/IMC Set-Screw Coupling
  (2)
• 4 in. EMT Raintight Compression Connector, Insulated
  (1)
• 4 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 4 in. EMT Raintight Compression Coupling
  (1)
• 4 in. EMT Set-Screw Connector, Insulated
  (1)
• 4 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 4 in. EMT Set-Screw Coupling
  (1)
• 4 in. Flex Squeeze Connector, Insulated
  (1)
• 4 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 4 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 4 in. Rigid/IMC 3-Piece Coupling
  (1)
• 4 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 4 in. Rigid/IMC Compression Coupling
  (1)
• 4 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 4 in. to 2 in. Reducing Washer
  (1)
• 4 in. to 2-1/2 in. Reducing Washer
  (1)
• 4 in. to 3 in. Reducing Washer
  (1)
• 6 in. Rigid/IMC 3-Piece Coupling
  (1)
• Double 3/8 in. Armored Cable Connector, .460- .611
  (2)
• Nonmetallic 1 in. KO Sheathed Cable Connector
  (1)
• Nonmetallic 1/2 in. KO Sheathed Cable Connector (100-Pack)
  (1)
• Nonmetallic 3/4 in. KO Sheathed Cable Connector
  (1)
• SEU Cable Entrance Head 3 #3/0 - 3 #4/0, 1 #1/0 - 1 #2/0
  (1)
• SEU Cable Entrance Head 3 #8 - 3 #1, 1 #6 - 1 #3
  (1)

Description - Marketing Copy

• Bond EMT conduit to a box or enclosure with RACO compression connectors. Offered in two styles, insulated or noninsulated. Provides concrete-tight connections. Suitable for applications above 600V.
  (20)
• Bond EMT conduit to a box or enclosure with RACO compression connectors. Provides concrete-tight connections. Offered in either insulated or noninsulated. Suitable for applications above 600V.
  (28)
• Bond EMT conduit to a box or enclosure with RACO indenter connectors. Offered in either insulated or noninsulated styles. Provides concrete-tight connections when taped.
  (3)
• Bond unthreaded rigid/IMC conduit to a box or enclosure with RACO compression connectors. Offered in two styles, insulated or noninsulated. Provides concrete-tight connections.
  (15)
• Couple two ends of EMT conduit in dry locations with RACO compression couplings. Provides concrete-tight connections. Suitable for applications above 600V.
  (16)
• Couple two ends of EMT conduit with RACO compression connectors. Provides concrete-tight connections. Suitable for applications above 600V.
  (10)
• Couple two ends of unthreaded rigid/IMC conduit with RACO compression couplings. Provide concrete-tight connections.
  (10)
• Create the space between the conduit and mounting space with RACO Clamp Backs. Used with EMT or Rigid/IMC straps. Prevent buildup of snow and rain between the conduit and surface in outdoor applications.
  (8)
• In dry locations, bond EMT conduity to a box or enclosure with RACO set-screw connectors. Offered in two styles, insulated or noninsulated. Provides concrete-tight connections when taped. Suitable for applications above 600V.
  (17)
• In dry locations, bond unthreaded rigid/IMC conduit to a box or enclosure with RACO set-screw connectors. Offered in two styles, insulated or noninsulated. Suitable for concrete-tight applications when taped.
  (6)
• In dry locations, couple two ends of unthreaded rigid/IMC conduit with RACO set-screw couplings. Suitable for concrete-tight applications when taped.
  (6)
• In wet locations, bond EMT conduit to a box or enclosure use RACO Raintight compression connectors. Offered in two styles, insulated or noninsulated. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15.).
  (19)
• In wet locations, couple two ends of conduit with RACO compression couplings. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15.) For easy inspection, "Wet Location" is marked on all fittings.
  (10)
• Positively seal between fitting and enclosure with RACO sealing washers.
  (6)
• Raco the Insider is a thermoplastic connector that connects one or two runs of Nonmetallic Sheathed Cable to a box. The Insider can be used with steel boxes, panel boxes or plastic boxes with knockouts. The connector is to be used in dry locations. The connector is to be installed from inside the box.
  (1)
• RACOs new Double Barrel Push-in cable connectors make it easy to secure two or more metal-clad cable into boxes or enclosures. Simply insert a cable into the cable opening, then snap the box end of the connector into a box knockout, done! No tools needed for a secure assembly. Push-in connectors are perfect for new or old work and can be removed and reused.
  (2)
• RACOs new Push-in cable connectors make it easy to secure metal-clad cable into boxes or enclosures. Simply insert a cable into the cable opening, then snap the box end of the connector into a box knockout, done! No tools needed for a secure assembly. Push-in connectors are perfect for new or old work and can be removed and reused.
  (2)
• To bond EMT conduit to a box or enclosure, use RACO set-screws. Provides concrete-tight connections when taped. Offered either as insulated or uninsulated. Suitable for applications above 600V.
  (25)
• To couple two ends of EMT conduit, use RACO set-screw couplings in dry locations. Provides concrete-tight connections when taped. Suitable for applications above 600 volts.
  (15)
• Used in dry locations, bond EMT conduit to a box or enclosure with RACO offset connectors. Provides concrete-tight connections when taped. Suitable for applications above 600V.
  (2)
• Used in dry locations, couple two ends of conduit with RACO set-screw couplings. Provides concrete-tight connections when taped. Suitable for applications above 600V.
  (9)

Description - Short

• 0.5 in to 1 in Ground Clamp for 0.5 in Rigid Conduit, Bronze Alloy
  (1)
• 0.5 in to 1 in Ground Clamp for 0.75 in Rigid Conduit, Bronze Alloy
  (1)
• 0.5 in to 1 in Ground Clamp for Bare Armored Ground Wires, Bronze Alloy
  (1)
• 0.5 in to 1 in Ground Clamp, for Bare Ground Wires, Bronze Alloy
  (1)
• 1 in. 90 Degree Flex Squeeze Connector, Insulated
  (1)
• 1 in. 90 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 1 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 1 in. EMT Compression Connector, Insulated
  (2)
• 1 in. EMT Compression Connector, Uninsulated
  (3)
• 1 in. EMT Compression Coupling
  (3)
• 1 in. EMT or 3/4 in. Rigid/IMC Clamp Back
  (1)
• 1 in. EMT Raintight Compression Connector, Insulated
  (1)
• 1 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 1 in. EMT Raintight Compression Coupling
  (1)
• 1 in. EMT Set-Screw Connector, Insulated
  (2)
• 1 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 1 in. EMT Set-Screw Coupling
  (2)
• 1 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 1 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 1 in. Flex to 1 in. EMT Screw-In/Compression Coupling
  (1)
• 1 in. Flex/AC Straight Squeeze Connector, Uninsulated
  (1)
• 1 in. Rigid/IMC 3-Piece Coupling
  (1)
• 1 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 1 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 1 in. Rigid/IMC Compression Coupling
  (1)
• 1 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 1 in. Rigid/IMC or EMT Set-Screw Coupling
  (1)
• 1 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 1 in. Rigid/IMC Set-Screw Coupling
  (1)
• 1 in. Rigid/IMC to Flex Combination Coupling
  (1)
• 1 in. Sealing Washer
  (1)
• 1 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 1 in. to 1/2 in. Reducing Washer
  (1)
• 1 in. to 3/4 in. Reducing Washer
  (1)
• 1-1/2 in. 90 Degree Flex Squeeze Connector, Insulated
  (1)
• 1-1/2 in. 90 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 1-1/2 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 1-1/2 in. EMT Compression Connector, Insulated
  (2)
• 1-1/2 in. EMT Compression Connector, Uninsulated
  (3)
• 1-1/2 in. EMT Compression Coupling
  (3)
• 1-1/2 in. EMT or 1-1/4 in. Rigid/IMC Clamp Back
  (1)
• 1-1/2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 1-1/2 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 1-1/2 in. EMT Raintight Compression Coupling
  (1)
• 1-1/2 in. EMT Set-Screw Connector, Insulated
  (2)
• 1-1/2 in. EMT Set-Screw Connector, Uninsulated
  (1)
• 1-1/2 in. EMT Set-Screw Coupling
  (3)
• 1-1/2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 1-1/2 in. Flex Straight Squeeze Connector, Uninsulated
  (2)
• 1-1/2 in. Offset 3/4 in. Nipple
  (1)
• 1-1/2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 1-1/2 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 1-1/2 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 1-1/2 in. Rigid/IMC Compression Coupling
  (1)
• 1-1/2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 1-1/2 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 1-1/2 in. Rigid/IMC Set-Screw Coupling
  (1)
• 1-1/2 in. Sealing Washer
  (1)
• 1-1/2 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 1-1/2 in. to 1 in. Reducing Washer
  (1)
• 1-1/2 in. to 1-1/4 in. Reducing Washer
  (1)
• 1-1/2 in. to 1/2 in. Reducing Washer
  (1)
• 1-1/2 in. to 3/4 in. Reducing Washer
  (1)
• 1-1/4 in. 90 Degree Flex Squeeze Connector, Insulated
  (1)
• 1-1/4 in. 90 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 1-1/4 in. EMT Compression Connector, Insulated
  (2)
• 1-1/4 in. EMT Compression Connector, Uninsulated
  (2)
• 1-1/4 in. EMT Compression Coupling
  (2)
• 1-1/4 in. EMT Raintight Compression Connector, Insulated
  (1)
• 1-1/4 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 1-1/4 in. EMT Raintight Compression Coupling
  (1)
• 1-1/4 in. EMT Set-Screw Connector, Insulated
  (2)
• 1-1/4 in. EMT Set-Screw Connector, Uninsulated
  (1)
• 1-1/4 in. EMT Set-Screw Coupling
  (2)
• 1-1/4 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 1-1/4 in. Flex Straight Squeeze Connector, Uninsulated
  (2)
• 1-1/4 in. Offset 3/4 in. Nipple
  (1)
• 1-1/4 in. Rigid/IMC 3-Piece Coupling
  (1)
• 1-1/4 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 1-1/4 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 1-1/4 in. Rigid/IMC Compression Coupling
  (1)
• 1-1/4 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 1-1/4 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 1-1/4 in. Rigid/IMC Set-Screw Coupling
  (1)
• 1-1/4 in. Sealing Washer, 5 per bag
  (1)
• 1-1/4 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 1-1/4 in. to 1 in. Reducing Washer
  (1)
• 1-1/4 in. to 1/2 in. Reducing Washer
  (1)
• 1-1/4 in. to 3/4 in. Reducing Washer
  (1)
• 1.25 in to 2 in Ground Clamp for 0.5 in Rigid Conduit, Bronze Alloy
  (1)
• 1.25 in to 2 in Ground Clamp for Bare Armored Ground Wires, Bronze Alloy
  (1)
• 1.25 in to 2 in Ground Clamp, for Bare Ground Wires, Bronze Alloy
  (1)
• 1.5 in to 1 in Ground Clamp, for Bare Ground Wires, Bronze Alloy
  (1)
• 1/1/4 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 1/2 in. 45 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 1/2 in. 90 Degree Flex/AC Squeeze Connector, Insulated
  (1)
• 1/2 in. 90 Degree Flex/AC Squeeze Connector, Uninsulated
  (1)
• 1/2 in. EMT 2-piece Connector
  (1)
• 1/2 in. EMT 90 Short Angle Connector
  (1)
• 1/2 in. EMT Compression Connector, Insulated
  (2)
• 1/2 in. EMT Compression Connector, Uninsulated
  (3)
• 1/2 in. EMT Compression Coupling
  (2)
• 1/2 in. EMT Indenter Connector, Insulated
  (1)
• 1/2 in. EMT Indenter Connector, Uninsulated
  (1)
• 1/2 in. EMT Indenter Coupling
  (1)
• 1/2 in. EMT Offset Compression Connector
  (1)
• 1/2 in. EMT Offset Connector
  (1)
• 1/2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 1/2 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 1/2 in. EMT Raintight Compression Coupling
  (1)
• 1/2 in. EMT Set-Screw Connector, Insulated
  (1)
• 1/2 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 1/2 in. EMT Set-Screw Coupling
  (2)
• 1/2 in. Flex Screw-In Connector
  (1)
• 1/2 in. Flex Screw-In Coupling
  (1)
• 1/2 in. Flex Set-Screw Connector
  (1)
• 1/2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 1/2 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 1/2 in. Flex to 1/2 in. EMT Screw-In/Compression Coupling
  (1)
• 1/2 in. Flex to 1/2 in. EMT Squeeze/Compression Coupling
  (1)
• 1/2 in. Flex/AC 90 Degree Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 1/2 in. Flex/AC Straight Squeeze Connector, Uninsulated
  (1)
• 1/2 in. MCI/MCI-A/AC/HCF Cable Connector
  (1)
• 1/2 in. REDI-LOC AC/MC Cable Connector
  (2)
• 1/2 in. REDI-LOC AC/MC Duplex Cable Connector
  (1)
• 1/2 in. REDI-LOCII AC/MC Cable Connector
  (1)
• 1/2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 1/2 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 1/2 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 1/2 in. Rigid/IMC Compression Coupling
  (1)
• 1/2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 1/2 in. Rigid/IMC or EMT Set-Screw Coupling
  (1)
• 1/2 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 1/2 in. Rigid/IMC Set-Screw Coupling
  (1)
• 1/2 in. Rigid/IMC to Flex Combination Coupling
  (1)
• 1/2 in. Sealing Washer
  (1)
• 1/2 in. THE INSIDER Nonmetallic Sheathed Cable Connector
  (1)
• 2 in. 90 Degree Flex Squeeze Connector, Insulated
  (1)
• 2 in. 90 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 2 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 2 in. EMT Compression Connector, Insulated
  (3)
• 2 in. EMT Compression Connector, Uninsulated
  (3)
• 2 in. EMT Compression Coupling
  (3)
• 2 in. EMT or 1-1/2 in. Rigid/IMC Clamp Back
  (1)
• 2 in. EMT or Rigid/IMC Clamp Back
  (1)
• 2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 2 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 2 in. EMT Raintight Compression Coupling
  (1)
• 2 in. EMT Set-Screw Connector, Insulated
  (2)
• 2 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 2 in. EMT Set-Screw Coupling
  (3)
• 2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 2 in. Flex Straight Squeeze Connector, Uninsulated
  (2)
• 2 in. Offset 3/4 in. Nipple
  (1)
• 2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 2 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 2 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 2 in. Rigid/IMC Compression Coupling
  (1)
• 2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 2 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 2 in. Rigid/IMC Set-Screw Coupling
  (1)
• 2 in. Sealing Washer
  (1)
• 2 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 2 in. to 1 in. Reducing Washer
  (1)
• 2 in. to 1-1/2 in. Reducing Washer
  (1)
• 2 in. to 1-1/4 in. Reducing Washer
  (1)
• 2 in. to 3/4 in. Reducing Washer
  (1)
• 2-1/2 EMT in. Compression Coupling
  (1)
• 2-1/2 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 2-1/2 in. EMT Compression Connector, Insulated
  (3)
• 2-1/2 in. EMT Compression Connector, Uninsulated
  (2)
• 2-1/2 in. EMT Compression Coupling
  (2)
• 2-1/2 in. EMT or Rigid/IMC Clamp Back
  (1)
• 2-1/2 in. EMT or Rigid/IMC Set-Screw Connector, Insulated
  (2)
• 2-1/2 in. EMT or Rigid/IMC Set-Screw Coupling
  (2)
• 2-1/2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 2-1/2 in. EMT Raintight Compression Coupling
  (1)
• 2-1/2 in. EMT Set-Screw Connector, Uninsulated
  (1)
• 2-1/2 in. EMT Set-Screw Coupling
  (1)
• 2-1/2 in. Flex Squeeze Connector, Insulated
  (1)
• 2-1/2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 2-1/2 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 2-1/2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 2-1/2 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 2-1/2 in. Rigid/IMC Compression Coupling
  (1)
• 2-1/2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 2-1/2 in. to 1 in. Reducing Washer
  (1)
• 2-1/2 in. to 1-1/4 in. Reducing Washer
  (1)
• 2-1/2 in. to 2 in. Reducing Washer
  (1)
• 2-1/2. to 1-1/2 in. Reducing Washer
  (1)
• 3 EMT in. Compression Coupling
  (1)
• 3 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 3 in. EMT Compression Connector, Insulated
  (2)
• 3 in. EMT Compression Connector, Uninsulated
  (2)
• 3 in. EMT Compression Coupling
  (2)
• 3 in. EMT or Rigid/IMC Set-Screw Connector, Insulated
  (2)
• 3 in. EMT or Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 3 in. EMT or Rigid/IMC Set-Screw Coupling
  (2)
• 3 in. EMT Raintight Compression Connector, Insulated
  (1)
• 3 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 3 in. EMT Raintight Compression Coupling
  (1)
• 3 in. EMT Set-Screw Connector, Insulated
  (1)
• 3 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 3 in. EMT Set-Screw Coupling
  (1)
• 3 in. Flex Squeeze Connector, Insulated
  (1)
• 3 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 3 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 3 in. Rigid/IMC 3-Piece Coupling
  (1)
• 3 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 3 in. Rigid/IMC Compression Coupling
  (1)
• 3 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 3 in. to 1-1/2 in. Reducing Washer
  (1)
• 3 in. to 1-1/4 in. Reducing Washer
  (1)
• 3 in. to 2 in. Reducing Washer
  (1)
• 3 in. to 2-1/2 in. Reducing Washer
  (1)
• 3-1/2 EMT in. Compression Coupling
  (1)
• 3-1/2 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 3-1/2 in. EMT Compression Connector, Insulated
  (2)
• 3-1/2 in. EMT Compression Connector, Uninsulated
  (2)
• 3-1/2 in. EMT Compression Coupling
  (1)
• 3-1/2 in. EMT or Rigid/IMC Clamp Back
  (1)
• 3-1/2 in. EMT or Rigid/IMC Set-Screw Connector, Insulated
  (2)
• 3-1/2 in. EMT or Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 3-1/2 in. EMT or Rigid/IMC Set-Screw Coupling
  (1)
• 3-1/2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 3-1/2 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 3-1/2 in. EMT Raintight Compression Coupling
  (1)
• 3-1/2 in. EMT Set-Screw Connector, Insulated
  (1)
• 3-1/2 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 3-1/2 in. EMT Set-Screw Coupling
  (1)
• 3-1/2 in. Flex Squeeze Connector, Insulated
  (1)
• 3-1/2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 3-1/2 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 3-1/2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 3-1/2 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 3-1/2 in. Rigid/IMC Compression Coupling
  (1)
• 3-1/2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 3-1/2 in. to 2 in. Reducing Washer
  (1)
• 3-1/2 in. to 2-1/2 in. Reducing Washer
  (1)
• 3-1/2 in. to 3 in. Reducing Washer
  (1)
• 3/4 in. 90 Degree Flex/AC Squeeze Connector, Insulated
  (1)
• 3/4 in. 90 Degree Flex/AC Squeeze Connector, Uninsulated
  (1)
• 3/4 in. EMT 2-piece Connector
  (1)
• 3/4 in. EMT 90 Short Angle Connector
  (1)
• 3/4 in. EMT Compression Connector, Insulated
  (2)
• 3/4 in. EMT Compression Connector, Uninsulated
  (2)
• 3/4 in. EMT Compression Coupling
  (2)
• 3/4 in. EMT Indenter Connector, Insulated
  (1)
• 3/4 in. EMT Offset Compression Connector
  (1)
• 3/4 in. EMT Offset Connector
  (1)
• 3/4 in. EMT or 1/2 in. Rigid/IMC Clamp Back
  (1)
• 3/4 in. EMT or Rigid/IMC Compression Threaded Coupling
  (1)
• 3/4 in. EMT Raintight Compression Connector, Insulated
  (1)
• 3/4 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 3/4 in. EMT Raintight Compression Coupling
  (1)
• 3/4 in. EMT Set-Screw Connector, Insulated
  (2)
• 3/4 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 3/4 in. EMT Set-Screw Coupling
  (1)
• 3/4 in. Flex Screw-In Connector
  (1)
• 3/4 in. Flex Screw-In Coupling
  (1)
• 3/4 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 3/4 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 3/4 in. Flex to 3/4 in. EMT Screw-In/Compression Coupling
  (1)
• 3/4 in. Flex to 3/4 in. EMT Squeeze/Compression Coupling
  (1)
• 3/4 in. Flex/AC 90 Degree Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 3/4 in. Flex/AC Straight Squeeze Connector, Uninsulated
  (1)
• 3/4 in. MCI/AC/HCF Cable Connector
  (1)
• 3/4 in. Offset 3/4 in. Nipple
  (1)
• 3/4 in. REDI-LOC AC/MC Cable Connector
  (1)
• 3/4 in. Rigid/IMC 3-Piece Coupling
  (1)
• 3/4 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 3/4 in. Rigid/IMC Compression Coupling
  (1)
• 3/4 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 3/4 in. Rigid/IMC or EMT Set-Screw Coupling
  (1)
• 3/4 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 3/4 in. Rigid/IMC Set-Screw Coupling
  (1)
• 3/4 in. Rigid/IMC to Flex Combination Coupling
  (1)
• 3/4 in. Sealing Washer
  (1)
• 3/4 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 3/4 in. to 1/2 in. Reducing Washer
  (1)
• 3/8 in. 90 Degree Flex/AC Squeeze Connector, Uninsulated
  (1)
• 3/8 in. 45 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 3/8 in. 90 Degree Flex/AC Squeeze Connector, Insulated
  (1)
• 3/8 in. Armored Cable Connector, .402-.610
  (1)
• 3/8 in. Armored Cable Connector, .470- .610
  (1)
• 3/8 in. Flex Screw-In Connector
  (1)
• 3/8 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 3/8 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 3/8 in. Flex to 1/2 in. EMT Squeeze/Compression Coupling
  (1)
• 3/8 in. Flex/AC 90 Degree Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 3/8 in. Flex/AC Cable Set-Screw Connector
  (1)
• 3/8 in. Flex/AC Straight Squeeze Connector, Uninsulated
  (1)
• 3/8 in. Flex/AC/MC Duplex Connector
  (1)
• 3/8 in. Flex/AC/MC/NMSC Clamp Type Connector
  (1)
• 4 EMT in. Compression Coupling
  (1)
• 4 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 4 in. EMT Compression Connector, Insulated
  (3)
• 4 in. EMT Compression Connector, Uninsulated
  (3)
• 4 in. EMT Compression Coupling
  (2)
• 4 in. EMT or Rigid/IMC Clamp Back
  (1)
• 4 in. EMT or Rigid/IMC Set-Screw Connector, Insulated
  (2)
• 4 in. EMT or Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 4 in. EMT or Rigid/IMC Set-Screw Coupling
  (2)
• 4 in. EMT Raintight Compression Connector, Insulated
  (1)
• 4 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 4 in. EMT Raintight Compression Coupling
  (1)
• 4 in. EMT Set-Screw Connector, Insulated
  (1)
• 4 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 4 in. EMT Set-Screw Coupling
  (1)
• 4 in. Flex Squeeze Connector, Insulated
  (1)
• 4 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 4 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 4 in. Rigid/IMC 3-Piece Coupling
  (1)
• 4 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 4 in. Rigid/IMC Compression Coupling
  (1)
• 4 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 4 in. to 2 in. Reducing Washer
  (1)
• 4 in. to 2-1/2 in. Reducing Washer
  (1)
• 4 in. to 3 in. Reducing Washer
  (1)
• 6 in. Rigid/IMC 3-Piece Coupling
  (1)
• Double 3/8 in. Armored Cable Connector, .460- .611
  (2)
• Nonmetallic 1 in. KO Sheathed Cable Connector
  (1)
• Nonmetallic 1/2 in. KO Sheathed Cable Connector (100-Pack)
  (1)
• Nonmetallic 3/4 in. KO Sheathed Cable Connector
  (1)
• SEU Cable Entrance Head 3 #3/0 - 3 #4/0, 1 #1/0 - 1 #2/0
  (1)
• SEU Cable Entrance Head 3 #8 - 3 #1, 1 #6 - 1 #3
  (1)

Description - Slang

• 2-Piece Connector
  (1)
• 3-Piece Coupling
  (2)
• Cable Connector
  (4)
• Compression Connector
  (5)
• Compression Coupling
  (8)
• Duplex Cable Connector
  (1)
• Flex Combination Coupling
  (3)
• Flex Screw-In Connector
  (2)
• Flex Screw-In Coupling
  (2)
• Flex Squeeze Connector
  (21)
• Flex Straight Squeeze Connector
  (9)
• Floor Mount Coupling
  (5)
• Ground Clamp
  (5)
• Indenter Connector
  (3)
• Indenter Coupling
  (1)
• Offset Compression Connector
  (2)
• Offset Connector
  (2)
• Offset Nipple
  (4)
• Reducing Washer
  (25)
• Screw In Compression Coupling
  (3)
• Sealing Washer
  (3)
• Service Entrance Head
  (7)
• Set-Screw Connector
  (10)
• Set-Screw Coupling
  (17)
• Sheathed Cable Connector
  (1)
• Short Angle Connector
  (2)

EMT Size

• 0.75 in
  (1)
• 1 in
  (1)
• 1.50 in
  (1)
• 2 in
  (2)
• 2.50 in
  (1)
• 3.50 in
  (1)
• 4 in
  (1)

Enclosure

• NEMA 4
  (25)
• NEMA FB1
  (2)
• Silver
  (9)

EU RoHS Indicator

• Contact Manufacturer
  (301)
• Yes
  (84)

FEATURES - Bullets

• 1-piece steel ring with neoprene gasket provides a raintight seal;Steel ring is zinc electroplated for added corrosion protection;1-piece design assures proper installation;Available in trade sizes 1/2 in. through 2 in.
  (6)
• All malleable construction ensures mechanical protection for the raceway;Electro zinc plated for added corrosion protection;UPC bar coded fittings are individually polybagged with a preprinted UPC-A bar code and packaged in pre-scored tear top cartons for an attractive presentation;Additional sizes available
  (30)
• All malleable construction ensures mechanical protection for the raceway;Zinc-electroplated for added corrosion protection
  (11)
• All malleable iron construction ensures mechanical protection for the raceway;All components are zinc electroplated for corrosion protection;Additional sizes available
  (3)
• All steel construction ensures mechanical protection for the raceway;All components are zinc electroplated for corrosion protection;Additional sizes available
  (1)
• All steel construction ensures mechanical protection;All components are zinc electroplated for corrosion protection;UPC bar code fittings are individually polybagged with a preprinted UPC-A bar code and packaged in pre-scored tear top cartons for an attractive presentation;Additional sizes available
  (4)
• All steel construction provides installation integrity;Reducing washer is stamped with trade size information for ease of product identification;Zinc electroplated for added corrosion protection;Additional sizes available
  (28)
• All steel/malleable iron construction ensures mechanical protection for the raceway;Zinc-electroplated for added corrosion protection;Hex compression nuts assure easy wrench installation;Available in trade sizes 1/2 in. through 4 in.
  (6)
• All steel/malleable iron construction ensures mechanical protection for the raceway;Zinc-electroplated for added corrosion protection;Insulated;Hex compression nuts assure easy wrench installation;UL Listed, CSA;Available in trade sizes 1/2 in. through 2 in.
  (5)
• All steel/malleable iron construction ensures mechanical protection for the raceway;Zinc-electroplated for added corrosion protection;Noninsulated;Hex compression nuts assure easy wrench installation;UL Listed, CSA;Available in trade sizes 1/2 in. through 4 in.
  (6)
• Bronze cast construction assures ground path continuity and provides corrosion resistance;Additional sizes available
  (7)
• Bronze cast construction assures ground path continuity and provides corrosion resistance;Fits 0.5 in through 1 in pipe, rebar, and copper rods
  (1)
• Easy to install, just tilt, insert and snap down;Tri-head screw/clamp design - connector can be installed by using a slotted, Phillips or Robertson head screwdriver;Integral insuliner provides maximum wire protection;Durable all-steel construction;Zinc electroplated for corrosion protection;Additional sizes available
  (2)
• Fits standard 1/2" knockouts in electrical boxes or enclosures;Connector designed to terminate MC, MCI-A, AC, AC/HCF, MCI-A HFC, MC-PCS,and RWFMC;Die-cast zinc construction with nylon anti-short bushing;For use in dry locations;See Sell sheet for cable ranges.
  (1)
• Fits standard 1/2" knockouts in electrical boxes or enclosures;Connector designed to terminate MC, MCI-A, AC, AC/HCF, MCI-A HFC, MC-PCS,and RWFMC;Die-cast zinc construction with nylon anti-short bushing;Tinted gold inside to indicate larger cable range;For use in dry locations;See Sell sheet for cable ranges.
  (1)
• Fits standard 1/2" knockouts in electrical boxes or enclosures;Connector designed to terminate MC-PCS, MCI, MCI-A, AC, HCF, and FMC;Die-cast zinc construction with nylon anti-short bushing;For use in dry locations;See Sell Sheet for cable ranges
  (1)
• Fits standard 1/2" knockouts in electrical boxes or enclosures;Connector designed to terminate MC-PCS, MCI, MCI-A, AC, HCF, and FMC;Die-cast zinc construction with nylon anti-short bushing;Tinted blue inside to indicate larger cable range;For use in dry locations;See Sell Sheet for cable ranges
  (1)
• Installs from inside the box: The unique design allows the installer to run the NMSC through the knockout to the desired length before snapping the connector into the knockout. No more need to cut an oversized hole for an old work box and connector installation;UL listed for use with eccentric knockouts: THE INSIDER is the only NMSC Connector that has been U.L. tested for use with an eccentric knockout. No need to worry about the unused knockout pulling out;Accepts single and dual runs of NMSC: THE INSIDER can accommodate one of the widest ranges of NMSC combinations in the industry. There's no need to stock another connector;Snap-in design for knockouts: THE INSIDER locks into the removed knockout securely.No need to waste time with installing locknuts";One piece nonmetallic construction: THE INSIDER resists corrosion and offers insulation protection. THE INSIDER is made of a tough engineered thermoplastic and conforms to the requirements of UL514B, UL514C and CSA. THE INSIDER can be used in exposed and concealed ceilings and walls
  (1)
• Lightweight aluminum body construction eases installation and provides corrosion resistance;Plastic insulator snaps out easily for quick cable insertion;For cable sizes: 3-#3/0 through 3-#4/0 and 1-#1/0 through 1-#2/0;Additional size available
  (1)
• Lightweight aluminum body construction eases installation and provides corrosion resistance;Plastic insulator snaps out easily for quick cable insertion;Listed for use in wet locations;Additional sizes available
  (10)
• Lightweight aluminum body construction eases installation and provides corrosion resistance;Plastic insuliner snaps out easily for quick cable insertion;For cable sizes: 3-#8 through 3-#1 and 1-#6 through 1-#3;Additional size available
  (1)
• Malleable construction ensures mechanical protection for the raceway;Hex compression nuts assure easy wrench installation;All components are zinc electroplated for corrosion protection;Additional sizes available
  (2)
• Malleable iron construction ensures mechanical protection for the raceway;All components are zinc electroplated for corrosion protection;Additional sizes available
  (11)
• Malleable iron construction ensures mechanical protection for the raceway;Zinc-electroplated for added corrosion protection;Hex compression nuts assure easy wrench installation;Available in trade sizes 1/2 in. through 4 in.
  (4)
• Malleable iron construction ensures mechanical protection for the raceway;Zinc-electroplated for added corrosion protection;Noninsulated;Hex compression nuts assure easy wrench installation;UL Listed, CSA;Available in trade sizes 1/2 in. through 4 in.
  (4)
• Malleable iron construction ensures mechanical protection;Elongated bolt holes allows easy alignment with the conduit strap;UL Listed;Available in trade sizes of 1/2 in. through 4 in.
  (8)
• No tools needed to assemble to end of cable or install into box or enclosure;Preassembled anti-short bushing will not fall out during installation;Easy installation - push the cable into the fitting, push connector into the box or enclosure;Can be removed without tools and is reusable;Rugged one piece design;Made from steel and nylon (bushing);Zinc electroplated for corrosion protection;Tri-linigual (English, Spanish and French installation instructions included in each unit carton);UPC bar coded fittings are individually polybagged with a preprinted UPC-A bar code and packaged in pre-scored tear top cartons for an attractive presentation;Additional sizes available
  (4)
• Rugged metallic construction ensures mechanical protection for the raceway;Additional sizes available
  (24)
• Rugged metallic construction ensures mechanical protection for the raceway;UPC bar coded fittings are individually polybagged with a preprinted UPC-A bar code and packaged in pre-scored tear top cartons for an attractive presentation;Additional sizes available
  (3)
• Rugged metallic construction ensures mechanical protection;Additional sizes available
  (3)
• Rugged metallic construction ensures mechanical protection;Available in trade sizes of 1/2 in. through 4 in.
  (5)
• Rugged metallic construction ensures mechanical protection;Hex compression nuts assure easy wrench installation;Available in trade sizes of 1/2 in. through 4 in.
  (10)
• Rugged metallic construction ensures mechanical protection;Insulated;Oversized hex compression nuts assure easy wrench installation;UL Listed, CSA;Available in trade sizes of 1/2 in. through 4 in.
  (10)
• Rugged metallic construction ensures mechanical protection;Insulated;UL Listed for Rigid/IMC conduit, allowing for installation flexibility;Available in trade sizes of 1/2 in. through 4 in.
  (3)
• Rugged metallic construction ensures mechanical protection;Insulated;UL Listed;Available in trade sizes of 1/2 in. through 4 in.
  (5)
• Rugged metallic construction ensures mechanical protection;Noninsulated;Oversized hex compression nuts assure easy wrench installation;UL Listed, CSA;Available in trade sizes of 1/2 in. through 4 in.
  (10)
• Rugged metallic construction ensures mechanical protection;Noninsulated;UL Listed for Rigid/IMC conduit, allowing for installation flexibility;Available in trade sizes of 1/2 in. through 4 in.
  (3)
• Rugged metallic construction ensures mechanical protection;Noninsulated;UL Listed;Available in trade sizes of 1/2 in. through 4 in.
  (6)
• Rugged metallic construction ensures mechanical protection;Steel/malleable components are electro zinc plated for added corrosion protection;UPC bar coded fittings are individually polybagged with a preprinted UPC-A bar code and packaged in pre-scored tear top cartons for an attractive presentation;Additional sizes available
  (3)
• Rugged metallic construction ensures mechanical protection;UL Listed for Rigid/IMC conduit, allowing for installation flexibility;Available in trade sizes of 1/2 in. through 4 in.
  (4)
• Rugged metallic construction ensures mechanical protection;UL Listed; CSA;Available in trade sizes of 1/2 in. through 4 in.
  (2)
• Rugged metallic construction provides mechanical protection for the conductors;Additional sizes available
  (4)
• Rugged metallic construction provides mechanical protection for the raceway;Additional sizes available
  (2)
• Rugged metallic construction provides mechanical protection for the raceway;Hex compression nuts assure easy wrench installation;Additional sizes available
  (2)
• Rugged metallic construction will last the life of the installation;Additional size available
  (2)
• Rugged metallic construction will last the life of the installation;Additional sizes available
  (5)
• Rugged metallic construction will last the lifetime of the installation;Additional sizes available
  (2)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Available in trade sizes of 1/2 in. through 4 in.
  (5)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;cULus;Available in trade sizes of 1/2 in. through 4 in.
  (11)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Insulated;cULus;Available in trade sizes of 1/2 in. through 4 in.
  (13)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Insulated;Marked with "Wet Location" for easy inspection;cULus;Available in trade sizes of 1/2 in. through 4 in.;Installed knockout seal
  (10)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Insulated;Not UL Listed;Available in trade sizes of 1/2 in or 3/4 in.
  (2)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Insulated;Tri-head screws may be installed using slotted, Phillips, or Robertson head screwdriver;cULus;Available in trade sizes of 1/2 in. through 4 in.;1 set-screw
  (3)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Insulated;Tri-head screws may be installed using slotted, Phillips, or Robertson head screwdriver;cULus;Available in trade sizes of 1/2 in. through 4 in.;2 set-screw
  (3)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Insulated;Tri-head screws may be installed using slotted, Phillips, or Robertson head screwdriver;UL Listed;Available in trade sizes of 1/2 in. through 4 in.;2 set-screw
  (7)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Marked with "Wet Location" for easy inspection;Available in trade sizes of 1/2 in. through 4 in.
  (2)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Marked with "Wet Location" for easy inspection;cULus;Available in trade sizes of 1/2 in. through 4 in.
  (8)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Noninsulated;cULus;Available in trade sizes of 1/2 in. through 4 in.
  (15)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Noninsulated;Marked with "Wet Location" for easy inspection;cULus;Available in trade sizes of 1/2 in. through 4 in.;Installed knockout seal
  (9)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Noninsulated;Not UL Listed;Available in trade sizes of 1/2 in or 3/4 in.
  (1)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Noninsulated;Tri-head screws may be installed using slotted, Phillips, or Robertson head screwdriver;cULus;Available in trade sizes of 1/2 in. through 4 in.;1 set-screw
  (3)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Noninsulated;Tri-head screws may be installed using slotted, Phillips, or Robertson head screwdriver;cULus;Available in trade sizes of 1/2 in. through 4 in.;2 set-screw
  (1)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Noninsulated;Tri-head screws may be installed using slotted, Phillips, or Robertson head screwdriver;UL Listed;Available in trade sizes of 1/2 in. through 4 in.;2 set-screw
  (8)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Noninsulated;UL Listed;Available in trade sizes 1/2 in. through 4 in.
  (6)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Tri-head screws may be installed using slotted, Phillips, or Robertson head screwdriver;Available in trade sizes of 1/2 in. through 4 in.
  (4)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Tri-head screws may be installed using slotted, Phillips, or Robertson head screwdriver;cULus;Available in trade sizes of 1/2 in. through 4 in.
  (4)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;Tri-head screws may be installed using slotted, Phillips, or Robertson head screwdriver;UL Listed;Available in trade sizes of 1/2 in. through 4 in.
  (7)
• Steel construction ensures mechanical protection;Zinc-electroplated for added corrosion protection;UL Listed;Available in trade sizes 1/2 in. through 4 in.
  (6)
• Tri-head screw/clamp design can accommodate two runs of MCI, AC, and HCF cable. Connector can be installed by using a slotted, Phillips, or Robertson.;Preassembled anti-short bushing will not fall out during installation.;Reusable design - installation can be reversed just as easily as it was originally installed.;Made from steel, and nylon (bushing).;Zinc electro plated for corrosion protection.;Tri-lingual (English, Spanish, and French) installation instructions included in each unit carton.
  (1)

Finish

• Aluminum
  (12)
• Electrogalvanized
  (18)
• Galvanized
  (12)
• Gold
  (12)
• Hot Dip Galvanized
  (1)
• PVC
  (69)
• Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat)
  (5)
• Zinc Plated
  (276)

Fitting Type

• Clamps
  (12)
• Connectors
  (228)
• Couplings
  (103)
• Nipples
  (4)
• Straps/Clampbacks
  (8)
• Washers
  (34)

Flexibility

• (GRC & IMC) and (LFMC)
  (6)
• 29/32 - 1-5/64
  (1)
• EMT And Flexible Steel Conduit
  (7)
• EMT Conduit
  (69)
• EMT Conduit, Liquidtight Conduit
  (3)
• EMT Conduit, Rigid Conduit
  (7)
• Flexible
  (8)
• Flexible And EMT
  (5)
• Rigid
  (53)
• Rigid And EMT
  (4)
• Rigid And IMC
  (184)
• Rigid Conduit
  (74)
• RMC
  (21)
• RMC And IMC
  (114)
• RMC, IMC, EMT And Flexible Metal Conduit
  (9)

FV_BuyAmericanCompliant

• Contact Manufacturer
  (97)
• Yes
  (1)

FV_Certified Listed

• Buy America Compliant, Buy American Act Compliant, BABA Compliant (All status valid till December 2024)
  (1)
• cULus Listed
  (88)
• UL Listed
  (56)
• UL Listed;CSA Certified
  (43)

FV_Fitting Type

• Clamps
  (12)
• Connectors
  (228)
• Couplings
  (103)
• Nipples
  (4)
• Straps/Clampbacks
  (8)
• Washers
  (34)

FV_Product Family

• AC Cable
  (1)
• EMT
  (199)
• Flexible Metal
  (67)
• Flexible Metal; MC/AC
  (1)
• Liquidtight
  (6)
• MC/BX Cable
  (7)
• Miscellaneous Fittings
  (32)
• Non-Metallic Sheathed Cable
  (4)
• Rigid/IMC
  (51)
• Service Entrance
  (17)

Gauge

• 12 Gauge
  (12)

Height

• 0.858 in
  (1)
• 1.53 in
  (1)
• 1.66 IN
  (1)
• 1.768 in
  (1)
• 4.063 in
  (1)

Inside Diameter

• 0.17 in
  (1)
• 0.615000000000000 in
  (1)
• 0.855 in
  (1)
• 0.86 in
  (1)
• 0.875 in
  (1)
• 0.931 in
  (1)
• 1.06 in
  (1)
• 1.062 in
  (1)
• 1.065 in
  (1)
• 1.3125 in
  (1)
• 1.32 in
  (1)
• 1.33 in
  (1)
• 1.6875 in
  (1)
• 1.9375 in
  (1)
• 2.375 in
  (1)
• 2.875 in
  (1)
• 3.5 in
  (1)
• 4 in
  (1)
• 4.5 in
  (1)
• 44563
  (1)
• 44624
  (2)
• 5.625 in
  (1)
• 6.625 in
  (1)

Installation Type

• Compression
  (77)
• Screw In
  (8)
• Screw to Clamp
  (1)
• Set Screw
  (38)
• Slip-On
  (5)
• Threaded
  (41)

Insulated

• No
  (114)
• Yes
  (75)

Insulating Hole Diameter

• 2 Holes 0.375 Dia in;3 Holes 0.406 Dia in
  (1)
• 3 Holes 0.500 Dia in;2 Holes 0.438 Dia in
  (1)
• 3 Holes 0.625 Dia in;2 Holes 0.438 Dia in
  (1)
• 3 Holes 0.750 Dia in;2 Holes 0.598 Dia in;1 Hole 0.438 Dia in
  (1)
• 3 Holes 1 Dia in;2 Holes 0.750 Dia in;1 Hole 0.531 Dia in
  (1)
• 3 Holes 1.313 Dia in;3 Holes 0.875 Dia in;1 Hole 1 Dia in
  (2)
• 3 Holes 1.313 Dia in;4 Holes 1.125 Dia in
  (1)
• 3 Holes 1.756 Dia in;4 Holes 1.125 Dia in
  (1)
• 4 Holes 0.297 Dia in
  (1)

Insulation Type

• Insulated
  (84)
• Uninsulated
  (74)

Length

• 0.950000000000000 in
  (1)
• 1 in
  (1)
• 1-1/2 IN
  (2)
• 1-1/4 IN
  (2)
• 1-11/16 IN
  (3)
• 1-13/16 IN
  (4)
• 1-15/16 IN
  (2)
• 1-3/16 IN
  (1)
• 1-3/4 IN
  (7)
• 1-3/8 IN
  (4)
• 1-5/16 IN
  (1)
• 1-5/8 IN
  (7)
• 1-7/16 IN
  (1)
• 1-7/8 IN
  (3)
• 1-9/16 IN
  (2)
• 1.1 in
  (1)
• 1.146000000000000 in
  (1)
• 1.164 in
  (1)
• 1.25 in
  (1)
• 1.267 in
  (1)
• 1.282 in
  (1)
• 1.33 in
  (1)
• 1.345 in
  (1)
• 1.35 in
  (1)
• 1.36 in
  (1)
• 1.375 in
  (1)
• 1.4 in
  (1)
• 1.405000000000000 in
  (1)
• 1.41 in
  (2)
• 1.412 in
  (1)
• 1.43 in
  (2)
• 1.450000000000000 in
  (1)
• 1.47 in
  (7)
• 1.475 in
  (1)
• 1.5 in
  (4)
• 1.504 in
  (1)
• 1.51 in
  (2)
• 1.515000000000000 in
  (1)
• 1.52 in
  (1)
• 1.53 in
  (1)
• 1.530000000000000 in
  (1)
• 1.5625 in
  (1)
• 1.563 in
  (3)
• 1.62 in
  (2)
• 1.625 in
  (1)
• 1.63 in
  (3)
• 1.64 in
  (1)
• 1.65 in
  (2)
• 1.66 in
  (1)
• 1.68 in
  (1)
• 1.688 in
  (1)
• 1.69 in
  (1)
• 1.7 in
  (1)
• 1.72 in
  (3)
• 1.74 in
  (1)
• 1.745 in
  (1)
• 1.75 in
  (5)
• 1.77 in
  (1)
• 1.78 in
  (2)
• 1.8 in
  (2)
• 1.81 in
  (2)
• 1.82 in
  (1)
• 1.83 in
  (1)
• 1.84 in
  (1)
• 1.87 in
  (1)
• 1.870000000000000 in
  (1)
• 1.875 in
  (3)
• 1.88 in
  (1)
• 1.89 in
  (1)
• 1.895 in
  (2)
• 1.92 in
  (1)
• 1.94 in
  (3)
• 1.95 in
  (1)
• 1.96 in
  (1)
• 1.97 in
  (1)
• 1.98 in
  (1)
• 1.988 in
  (1)
• 10 ft
  (12)
• 10-1/8 IN
  (1)
• 10-3/8 IN
  (1)
• 10-5/8 IN
  (4)
• 10.38 in
  (1)
• 10.63 in
  (3)
• 11-1/2 IN
  (1)
• 11-1/8 IN
  (1)
• 11-3/4 IN
  (1)
• 11-3/8 IN
  (1)
• 11.13 in
  (1)
• 12-1/2 IN
  (1)
• 12-1/4 IN
  (1)
• 12-1/8 IN
  (1)
• 12-3/8 IN
  (1)
• 12.13 in
  (1)
• 12.63 in
  (1)
• 14-1/2 IN
  (2)
• 14.12 in
  (3)
• 14.3125 in
  (1)
• 14.875 in
  (2)
• 14.9375 in
  (1)
• 15-3/8 IN
  (1)
• 15-7/8 IN
  (1)
• 15.38 in
  (2)
• 16-1/2 IN
  (3)
• 16.12 in
  (4)
• 17-1/4 IN
  (1)
• 18 in
  (1)
• 18.12 in
  (3)
• 18.38 in
  (1)
• 18.76 in
  (1)
• 19-1/2 IN
  (2)
• 19.12 in
  (3)
• 2 in
  (12)
• 2-1/16 IN
  (3)
• 2-1/2 IN
  (6)
• 2-1/4 IN
  (6)
• 2-1/8 IN
  (3)
• 2-15/16 IN
  (1)
• 2-3/16 IN
  (4)
• 2-3/4 IN
  (1)
• 2-5/16 IN
  (3)
• 2-5/8 IN
  (3)
• 2-7/16 IN
  (2)
• 2-7/8 IN
  (1)
• 2-9/16 IN
  (3)
• 2.025 in
  (1)
• 2.03 in
  (2)
• 2.035 in
  (1)
• 2.05 in
  (1)
• 2.052 in
  (1)
• 2.06 in
  (2)
• 2.07 in
  (1)
• 2.075000000000000 in
  (1)
• 2.11 in
  (1)
• 2.125 in
  (5)
• 2.13 in
  (3)
• 2.14 in
  (1)
• 2.147 in
  (2)
• 2.16 in
  (4)
• 2.18 in
  (2)
• 2.1875 in
  (1)
• 2.19 in
  (7)
• 2.2 in
  (2)
• 2.213000000000000 in
  (1)
• 2.216 in
  (1)
• 2.219 in
  (1)
• 2.23 in
  (2)
• 2.25 in
  (2)
• 2.257 in
  (1)
• 2.284 in
  (1)
• 2.309000000000000 in
  (1)
• 2.31 in
  (6)
• 2.312 in
  (1)
• 2.35 in
  (1)
• 2.350000000000000 in
  (1)
• 2.359 in
  (1)
• 2.36 in
  (1)
• 2.375 in
  (2)
• 2.41 in
  (1)
• 2.4375 in
  (1)
• 2.44 in
  (2)
• 2.47 in
  (1)
• 2.489 in
  (1)
• 2.5 in
  (3)
• 2.52 in
  (2)
• 2.53 in
  (1)
• 2.530000000000000 in
  (1)
• 2.558 in
  (1)
• 2.56 in
  (2)
• 2.58 in
  (1)
• 2.587 in
  (1)
• 2.62 in
  (4)
• 2.625 in
  (1)
• 2.63 in
  (1)
• 2.65 in
  (2)
• 2.67 in
  (1)
• 2.68 in
  (1)
• 2.69 in
  (1)
• 2.7 in
  (1)
• 2.73 in
  (1)
• 2.74 in
  (1)
• 2.746 in
  (1)
• 2.75 in
  (1)
• 2.81 in
  (1)
• 2.85 in
  (1)
• 2.88 in
  (2)
• 2.93 in
  (1)
• 2.94 IN Overall Length At Maximum Expansion
  (1)
• 20 in
  (1)
• 20.12 in
  (2)
• 21.38 in
  (3)
• 21.76 in
  (1)
• 22-1/2 IN
  (4)
• 22.12 in
  (7)
• 24 in
  (2)
• 24.38 in
  (2)
• 24.76 in
  (1)
• 25-1/2 IN
  (2)
• 25.12 in
  (3)
• 25.88 in
  (2)
• 27.38 in
  (2)
• 27.76 in
  (1)
• 28-1/2 IN
  (4)
• 28.12 in
  (3)
• 3 in
  (2)
• 3-1/16 IN
  (1)
• 3-1/2 IN
  (6)
• 3-1/4 IN
  (6)
• 3-1/8 IN
  (1)
• 3-11/16 IN
  (1)
• 3-15/16 IN
  (1)
• 3-3/16 IN
  (5)
• 3-3/4 IN
  (6)
• 3-3/8 IN
  (3)
• 3-5/16 IN
  (2)
• 3-5/8 IN
  (1)
• 3-7/16 IN
  (1)
• 3-7/8 IN
  (2)
• 3-9/16 IN
  (1)
• 3.037000000000000 in
  (1)
• 3.05 in
  (1)
• 3.06 IN Overall Length At Maximum Expansion
  (1)
• 3.063 in
  (1)
• 3.09 in
  (1)
• 3.125 in
  (2)
• 3.13 in
  (2)
• 3.186 in
  (1)
• 3.19 in
  (3)
• 3.21 in
  (1)
• 3.24 in
  (1)
• 3.25 in
  (1)
• 3.27 in
  (1)
• 3.276000000000000 in
  (1)
• 3.28 IN Overall Length At Maximum Expansion
  (1)
• 3.280000000000000 in
  (1)
• 3.29 in
  (1)
• 3.31 in
  (4)
• 3.35 in
  (1)
• 3.361000000000000 in
  (1)
• 3.37 in
  (1)
• 3.375 in
  (1)
• 3.38 in
  (4)
• 3.38 IN Overall Length At Maximum Expansion
  (1)
• 3.4 in
  (1)
• 3.41 in
  (4)
• 3.418000000000000 in
  (1)
• 3.42 in
  (2)
• 3.45 in
  (1)
• 3.481 in
  (1)
• 3.5 in
  (1)
• 3.51 in
  (1)
• 3.52 in
  (1)
• 3.54 in
  (2)
• 3.63 in
  (2)
• 3.67 IN Overall Length At Maximum Expansion
  (1)
• 3.75 in
  (2)
• 3.875 in
  (2)
• 3.88 IN Overall Length At Maximum Expansion
  (1)
• 3.913000000000000 in
  (1)
• 3.94 IN Overall Length At Maximum Expansion
  (1)
• 3.95 in
  (1)
• 3/4 IN
  (1)
• 30 in
  (3)
• 30-1/2 IN
  (3)
• 31-1/2 IN
  (1)
• 31.88 in
  (1)
• 32-1/2 IN
  (2)
• 34-1/2 IN
  (1)
• 34.12 in
  (3)
• 39.38 in
  (3)
• 4 in
  (6)
• 4-1/2 IN
  (2)
• 4-1/4 IN
  (1)
• 4-3/8 IN
  (1)
• 4-5/16 IN
  (1)
• 4-5/8 IN
  (1)
• 4-9/16 IN
  (1)
• 4.06 in
  (1)
• 4.11 IN Overall Length At Maximum Expansion
  (1)
• 4.125 in
  (1)
• 4.1875 in
  (1)
• 4.19 in
  (1)
• 4.207 in
  (1)
• 4.21 in
  (1)
• 4.25 in
  (2)
• 4.28 IN Overall Length At Maximum Expansion
  (1)
• 4.38 in
  (5)
• 4.44 in
  (1)
• 4.5 in
  (3)
• 4.55 in
  (1)
• 4.67 in
  (1)
• 4.687 in
  (1)
• 4.75 in
  (2)
• 4.81 in
  (4)
• 4.85 in
  (1)
• 4.875 in
  (1)
• 4.937 in
  (1)
• 4.94 in
  (1)
• 4.980000000000000 in
  (1)
• 40-1/2 IN
  (3)
• 40.12 in
  (2)
• 42 in
  (1)
• 42.76 in
  (1)
• 43.88 in
  (1)
• 5 in
  (6)
• 5-1/2 IN
  (1)
• 5-1/4 IN
  (2)
• 5-3/4 IN
  (2)
• 5-5/8 IN
  (1)
• 5.025 in
  (1)
• 5.06 in
  (1)
• 5.11 in
  (1)
• 5.13 in
  (2)
• 5.25 in
  (2)
• 5.375 in
  (1)
• 5.38 in
  (1)
• 5.46 in
  (1)
• 5.47 in
  (1)
• 5.5 in
  (2)
• 5.72 in
  (1)
• 5.75 in
  (3)
• 6 in
  (1)
• 6-1/4 IN
  (2)
• 6-3/8 IN
  (2)
• 6-5/8 IN
  (5)
• 6.11 in
  (1)
• 6.25 in
  (1)
• 6.26 in
  (1)
• 6.375 in
  (1)
• 6.38 in
  (1)
• 6.63 in
  (3)
• 6.75 in
  (1)
• 6.81 in
  (1)
• 7 in
  (1)
• 7-1/2 IN
  (2)
• 7-1/4 IN
  (2)
• 7-1/8 IN
  (2)
• 7.13 in
  (1)
• 8 in
  (1)
• 8-1/2 IN
  (3)
• 8-1/4 IN
  (1)
• 8-1/8 IN
  (1)
• 8-5/8 IN
  (2)
• 8.125 in
  (2)
• 8.13 in
  (2)
• 8.375 in
  (1)
• 8.5 in
  (1)
• 8.63 in
  (1)
• 9 in
  (2)
• 9-1/2 IN
  (1)
• 9-1/4 IN
  (1)
• 9-7/8 IN
  (1)
• 9.25 in
  (2)
• 9.38 in
  (2)
• Fitting: 2-3/4 IN
  (2)
• Flexible Length: 1 IN
  (1)
• Flexible Length: 12 IN
  (3)
• Flexible Length: 18 IN
  (6)
• Flexible Length: 24 IN
  (4)
• Flexible Length: 27 IN
  (1)
• Flexible Length: 36 IN
  (2)
• Flexible Length: 6 IN
  (1)
• Flexible Length: 8 IN
  (1)

Material

• 6063 Aluminum Alloy
  (8)
• Aluminum
  (73)
• Aluminum Alloy, Electro-Tin Plated
  (8)
• Aluminum Alloyed-Bodied, Electro-Tin Plated
  (5)
• Body: Ductile Iron, Bonding Jumper: Tinned Copper, Grommets: Neoprene
  (4)
• Brass Tube, Bronze Outer Braid With Insulating Liner
  (11)
• Bronze
  (4)
• Canvas Base Phenolic
  (8)
• Cast Aluminum
  (3)
• Copper-Free Aluminum
  (16)
• Copperfree (4/10 Of 1 PCT Maximum) Aluminum
  (20)
• Die Cast Zinc
  (33)
• End Couplings: Bronze, Sleeve: Neoprene, Bands: Stainless Steel, Bonding Jumper: Tinned Copper Braid
  (12)
• End Units: Malleable Or Ductile Iron, Sleeves: Steel
  (2)
• Galvanized Steel
  (1)
• Head: Malleable/Ductile Iron, Sleeve: Steel, Insulating Bushing: Phenolic
  (5)
• High Strength Zinc Alloy
  (3)
• m12
  (1)
• Malleable Iron
  (209)
• Malleable Iron Body And Nut
  (4)
• Malleable Iron Body And Nut, Steel Ferrule
  (4)
• Malleable Iron Coupling, Steel Hardware, Neoprene Gasket
  (7)
• Malleable Iron, Steel Ferrule
  (10)
• Malleable Iron, Steel Locknut
  (4)
• Malleable or Ductile Iron
  (26)
• Nylon
  (2)
• Nylon DA66 Low smoke and flame resistant
  (1)
• Outer Bronze Braid And Inner Brass Core With Insulating Liner
  (88)
• Plastic
  (2)
• Plastic with Rubber Backing
  (1)
• PVC
  (79)
• Sleeve: Neoprene, End Couplings: Bronze, Bonding Jumper: Tinned Copper Braids, Bands: Stainless Steel, All Other Metal Parts Are Malleable, Ductile Iron Or Steel
  (3)
• Steel
  (279)
• Steel And Malleable Iron
  (2)
• Steel, Zinc Plated
  (3)
• Steel-Electroplated Zinc
  (4)
• Zinc
  (40)
• Zinc Alloy
  (1)
• Zinc Die Cast
  (87)
• Zinc Die-Cast
  (5)
• Zinc Diecast
  (1)
• Zinc Diecast, Steel, Rubber and Porcelain
  (9)

Minimum Pack Quantity

• 1
  (57)
• 10
  (47)
• 100
  (12)
• 12
  (10)
• 15
  (3)
• 2
  (2)
• 20
  (18)
• 200
  (1)
• 25
  (94)
• 4
  (2)
• 5
  (63)
• 50
  (2)
• 6
  (9)

Outside Diameter

• 0.093 in
  (1)
• 0.63 in
  (1)
• 0.723 in
  (1)
• 0.75 in
  (1)
• 0.78 in
  (1)
• 0.875 in
  (4)
• 0.88 in
  (1)
• 0.92 in
  (1)
• 0.93 in
  (1)
• 0.94 in
  (1)
• 1 in
  (1)
• 1-1/2 IN
  (7)
• 1-1/4 IN
  (4)
• 1-1/8 IN
  (5)
• 1-13/16 IN
  (2)
• 1-13/32 IN
  (13)
• 1-15/16 IN
  (2)
• 1-25/32 IN
  (1)
• 1-3/4 IN
  (44)
• 1-3/8 IN
  (2)
• 1-5/16 IN
  (2)
• 1-5/8 IN
  (1)
• 1-7/16 IN
  (3)
• 1-7/8 IN
  (3)
• 1-9/16 IN
  (2)
• 1.06 in
  (3)
• 1.0625 in
  (2)
• 1.07 in
  (1)
• 1.1 in
  (2)
• 1.125 in
  (3)
• 1.13 in
  (1)
• 1.16 in
  (1)
• 1.17 in
  (3)
• 1.18 in
  (1)
• 1.19 in
  (4)
• 1.25 in
  (4)
• 1.28 in
  (1)
• 1.31 in
  (7)
• 1.3125 in
  (2)
• 1.33 in
  (1)
• 1.36 in
  (1)
• 1.37 in
  (1)
• 1.375 in
  (2)
• 1.39 in
  (2)
• 1.41 in
  (33)
• 1.43 in
  (2)
• 1.438 in
  (1)
• 1.44 in
  (6)
• 1.45 in
  (1)
• 1.47 in
  (8)
• 1.5 in
  (2)
• 1.53 in
  (1)
• 1.563 in
  (2)
• 1.566 in
  (1)
• 1.57 in
  (2)
• 1.58 in
  (1)
• 1.59 in
  (1)
• 1.61 in
  (1)
• 1.62 in
  (2)
• 1.625 in
  (2)
• 1.63 in
  (2)
• 1.66 in
  (1)
• 1.67 in
  (1)
• 1.687 in
  (1)
• 1.6875 in
  (1)
• 1.69 in
  (1)
• 1.72 in
  (1)
• 1.725 in
  (1)
• 1.75 in
  (2)
• 1.76 in
  (1)
• 1.77 in
  (1)
• 1.81 in
  (1)
• 1.813 in
  (1)
• 1.816 in
  (1)
• 1.82 in
  (1)
• 1.84 in
  (1)
• 1.87 in
  (1)
• 1.88 in
  (2)
• 1.89 in
  (1)
• 1.9375 in
  (1)
• 1.94 in
  (2)
• 1.95 in
  (2)
• 2 in
  (12)
• 2-1/16 IN
  (6)
• 2-1/2 IN
  (4)
• 2-1/4 IN
  (8)
• 2-1/8 IN
  (3)
• 2-3/4 IN
  (9)
• 2-3/8 IN
  (6)
• 2-5/16 IN
  (1)
• 2-5/8 IN
  (7)
• 2-7/8 IN
  (1)
• 2.01 in
  (1)
• 2.05 in
  (1)
• 2.06 in
  (13)
• 2.062 in
  (1)
• 2.063 in
  (2)
• 2.1 in
  (1)
• 2.12 in
  (1)
• 2.125 in
  (1)
• 2.13 in
  (1)
• 2.136 in
  (1)
• 2.15 in
  (1)
• 2.16 in
  (1)
• 2.188 in
  (1)
• 2.22 in
  (1)
• 2.25 in
  (5)
• 2.28 in
  (1)
• 2.3 in
  (1)
• 2.31 in
  (1)
• 2.37 in
  (2)
• 2.375 in
  (1)
• 2.38 in
  (3)
• 2.4 in
  (1)
• 2.438 in
  (1)
• 2.51 in
  (1)
• 2.53 in
  (1)
• 2.59 in
  (1)
• 2.62 in
  (2)
• 2.63 in
  (8)
• 2.636 in
  (1)
• 2.67 in
  (1)
• 2.6875 in
  (1)
• 2.69 in
  (1)
• 2.75 in
  (4)
• 2.81 in
  (4)
• 2.83 in
  (1)
• 2.85 in
  (1)
• 2.87 in
  (1)
• 2.875 in
  (1)
• 2.89 in
  (1)
• 2.93 in
  (1)
• 2.938 in
  (1)
• 3 in
  (1)
• 3-1/16 IN
  (4)
• 3-1/2 IN
  (8)
• 3-1/4 IN
  (2)
• 3-1/6 IN
  (1)
• 3-1/8 IN
  (1)
• 3-11/16 IN
  (2)
• 3-3/4 IN
  (2)
• 3-3/8 IN
  (4)
• 3-5/16 IN
  (1)
• 3-7/8 IN
  (1)
• 3-9/16 IN
  (1)
• 3.06 in
  (4)
• 3.12 in
  (1)
• 3.125 in
  (1)
• 3.13 in
  (9)
• 3.14 in
  (1)
• 3.19 in
  (2)
• 3.25 in
  (4)
• 3.28 in
  (1)
• 3.29 in
  (1)
• 3.3 in
  (1)
• 3.31 in
  (1)
• 3.35 in
  (1)
• 3.375 in
  (1)
• 3.38 in
  (3)
• 3.4 in
  (2)
• 3.44 in
  (1)
• 3.5 in
  (2)
• 3.625 in
  (1)
• 3.63 in
  (1)
• 3.688 in
  (1)
• 3.7 in
  (1)
• 3.72 in
  (5)
• 3.75 in
  (1)
• 3.88 in
  (5)
• 3.93 in
  (1)
• 3.97 in
  (1)
• 4 in
  (18)
• 4-1/2 IN
  (5)
• 4-1/32 IN
  (1)
• 4-1/4 IN
  (3)
• 4-1/8 IN
  (2)
• 4-13/16 IN
  (1)
• 4-3/16 IN
  (2)
• 4-3/8 IN
  (1)
• 4-5/8 IN
  (1)
• 4-7/32 IN
  (1)
• 4-9/16 IN
  (1)
• 4.01 in
  (1)
• 4.02 in
  (1)
• 4.03 in
  (1)
• 4.05 in
  (1)
• 4.08 in
  (1)
• 4.125 in
  (1)
• 4.25 in
  (1)
• 4.31 in
  (1)
• 4.313 in
  (1)
• 4.37 in
  (1)
• 4.38 in
  (1)
• 4.44 in
  (1)
• 4.49 in
  (1)
• 4.5 in
  (1)
• 4.52 in
  (1)
• 4.56 in
  (1)
• 4.62 in
  (1)
• 4.63 in
  (1)
• 4.66 in
  (1)
• 4.687 in
  (1)
• 4.81 in
  (1)
• 4.875 in
  (1)
• 4.88 in
  (5)
• 4.9 in
  (1)
• 5 in
  (8)
• 5-1/2 IN
  (3)
• 5-1/4 IN
  (1)
• 5-1/8 IN
  (2)
• 5-3/8 IN
  (2)
• 5.01 in
  (1)
• 5.02 in
  (1)
• 5.06 in
  (1)
• 5.08 in
  (1)
• 5.13 in
  (1)
• 5.187 in
  (1)
• 5.2 in
  (1)
• 5.35 in
  (1)
• 5.375 in
  (1)
• 5.38 in
  (8)
• 5.44 in
  (1)
• 5.63 in
  (1)
• 5.75 in
  (2)
• 5.87 in
  (1)
• 5.88 in
  (1)
• 6 in
  (3)
• 6-1/4 IN
  (1)
• 6-1/8 IN
  (2)
• 6-3/16 IN
  (1)
• 6-3/8 IN
  (1)
• 6-5/8 IN
  (4)
• 6-7/8 IN
  (2)
• 6.125 in
  (1)
• 6.26 in
  (1)
• 6.44 in
  (4)
• 6.62 in
  (1)
• 6.63 in
  (2)
• 7 in
  (2)
• 7-1/4 IN
  (1)
• 7-3/8 IN
  (1)
• 7.25 in
  (1)
• 7.37 in
  (1)
• 8 in
  (1)
• 8-9/16 IN
  (1)
• 8.25 in
  (3)
• 9-1/2 IN
  (1)
• 9.63 in
  (1)
• Maximum Diameter 1.8750 IN
  (1)

Overall Length

• 1.28 in
  (1)
• 1.9 in
  (1)
• 2.25 in
  (1)
• 4 in
  (1)
• 4.375 in
  (1)

Packaging Type

• Polybag
  (1)

Paintable/Stainable

• No
  (1)

Pallet Quantity

• 100
  (1)
• 1000
  (5)
• 10000
  (19)
• 10125
  (1)
• 10500
  (2)
• 1080
  (1)
• 110
  (1)
• 1100
  (1)
• 1200
  (6)
• 12000
  (17)
• 1225
  (3)
• 12375
  (1)
• 1260
  (2)
• 1320
  (5)
• 13200
  (1)
• 1330
  (5)
• 14000
  (4)
• 1440
  (1)
• 14400
  (2)
• 1470
  (1)
• 150
  (1)
• 15000
  (5)
• 15050
  (2)
• 1520
  (6)
• 1600
  (6)
• 16000
  (8)
• 16500
  (1)
• 1800
  (7)
• 1806
  (1)
• 18900
  (1)
• 19500
  (1)
• 19800
  (1)
• 2000
  (3)
• 20000
  (12)
• 20250
  (2)
• 2080
  (2)
• 20800
  (1)
• 216
  (1)
• 2160
  (1)
• 2200
  (4)
• 224
  (2)
• 240
  (3)
• 2400
  (10)
• 24000
  (15)
• 2500
  (2)
• 252
  (4)
• 270
  (3)
• 280
  (8)
• 28000
  (1)
• 288
  (1)
• 2880
  (1)
• 294
  (3)
• 2940
  (3)
• 300
  (1)
• 3000
  (7)
• 3010
  (5)
• 31200
  (1)
• 3200
  (2)
• 32000
  (6)
• 336
  (6)
• 343
  (6)
• 3430
  (3)
• 34650
  (2)
• 3500
  (2)
• 3520
  (2)
• 360
  (2)
• 3600
  (1)
• 3675
  (2)
• 3840
  (1)
• 392
  (1)
• 3960
  (8)
• 4000
  (8)
• 4160
  (3)
• 420
  (1)
• 4200
  (3)
• 4375
  (1)
• 4400
  (1)
• 448
  (8)
• 450
  (4)
• 4500
  (3)
• 480
  (1)
• 4800
  (9)
• 48000
  (7)
• 486
  (1)
• 4900
  (2)
• 512
  (2)
• 5280
  (1)
• 540
  (6)
• 560
  (2)
• 567
  (2)
• 576
  (2)
• 60
  (2)
• 600
  (6)
• 6000
  (4)
• 60000
  (1)
• 6020
  (1)
• 6075
  (2)
• 6300
  (3)
• 640
  (1)
• 6400
  (2)
• 64000
  (2)
• 648
  (7)
• 660
  (2)
• 6650
  (1)
• 6750
  (3)
• 72
  (1)
• 7200
  (2)
• 75
  (1)
• 750
  (2)
• 7500
  (3)
• 7525
  (4)
• 800
  (4)
• 8000
  (13)
• 84
  (2)
• 840
  (1)
• 900
  (2)
• 90000
  (1)
• 945
  (3)
• 96
  (1)

Product Name

• 0.5 in to 1 in Ground Clamp for 0.5 in Rigid Conduit, Bronze Alloy
  (1)
• 0.5 in to 1 in Ground Clamp for 0.75 in Rigid Conduit, Bronze Alloy
  (1)
• 0.5 in to 1 in Ground Clamp for Bare Armored Ground Wires, Bronze Alloy
  (1)
• 0.5 in to 1 in Ground Clamp, for Bare Ground Wires, Bronze Alloy
  (1)
• 1 in. 90 Degree Flex Squeeze Connector, Insulated
  (1)
• 1 in. 90 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 1 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 1 in. EMT Compression Connector, Insulated
  (2)
• 1 in. EMT Compression Connector, Uninsulated
  (3)
• 1 in. EMT Compression Coupling
  (2)
• 1 in. EMT or 3/4 in. Rigid/IMC Clamp Back
  (1)
• 1 in. EMT Raintight Compression Connector, Insulated
  (1)
• 1 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 1 in. EMT Raintight Compression Coupling
  (1)
• 1 in. EMT Set-Screw Connector, Insulated
  (2)
• 1 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 1 in. EMT Set-Screw Coupling
  (2)
• 1 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 1 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 1 in. Flex to 1 in. EMT Screw-In/Compression Coupling
  (1)
• 1 in. Flex/AC Straight Squeeze Connector, Uninsulated
  (1)
• 1 in. Rigid/IMC 3-Piece Coupling
  (1)
• 1 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 1 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 1 in. Rigid/IMC Compression Coupling
  (1)
• 1 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 1 in. Rigid/IMC or EMT Set-Screw Coupling
  (1)
• 1 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 1 in. Rigid/IMC Set-Screw Coupling
  (1)
• 1 in. Rigid/IMC to Flex Combination Coupling
  (1)
• 1 in. Sealing Washer
  (1)
• 1 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 1 in. to 1/2 in. Reducing Washer
  (1)
• 1 in. to 3/4 in. Reducing Washer
  (1)
• 1-1/2 in. 90 Degree Flex Squeeze Connector, Insulated
  (1)
• 1-1/2 in. 90 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 1-1/2 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 1-1/2 in. EMT Compression Connector, Insulated
  (2)
• 1-1/2 in. EMT Compression Connector, Uninsulated
  (3)
• 1-1/2 in. EMT Compression Coupling
  (3)
• 1-1/2 in. EMT or 1-1/4 in. Rigid/IMC Clamp Back
  (1)
• 1-1/2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 1-1/2 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 1-1/2 in. EMT Raintight Compression Coupling
  (1)
• 1-1/2 in. EMT Set-Screw Connector, Insulated
  (2)
• 1-1/2 in. EMT Set-Screw Connector, Uninsulated
  (1)
• 1-1/2 in. EMT Set-Screw Coupling
  (3)
• 1-1/2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 1-1/2 in. Flex Straight Squeeze Connector, Uninsulated
  (2)
• 1-1/2 in. Offset 3/4 in. Nipple
  (1)
• 1-1/2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 1-1/2 in. Rigid/IMC Compression Connector
  (1)
• 1-1/2 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 1-1/2 in. Rigid/IMC Compression Coupling
  (1)
• 1-1/2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 1-1/2 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 1-1/2 in. Rigid/IMC Set-Screw Coupling
  (1)
• 1-1/2 in. Sealing Washer
  (1)
• 1-1/2 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 1-1/2 in. to 1 in. Reducing Washer
  (1)
• 1-1/2 in. to 1-1/4 in. Reducing Washer
  (1)
• 1-1/2 in. to 1/2 in. Reducing Washer
  (1)
• 1-1/2 in. to 3/4 in. Reducing Washer
  (1)
• 1-1/4 in. 90 Degree Flex Squeeze Connector, Insulated
  (1)
• 1-1/4 in. 90 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 1-1/4 in. EMT Compression Connector, Insulated
  (2)
• 1-1/4 in. EMT Compression Connector, Uninsulated
  (2)
• 1-1/4 in. EMT Compression Coupling
  (2)
• 1-1/4 in. EMT Raintight Compression Connector, Insulated
  (1)
• 1-1/4 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 1-1/4 in. EMT Raintight Compression Coupling
  (1)
• 1-1/4 in. EMT Set-Screw Connector, Insulated
  (2)
• 1-1/4 in. EMT Set-Screw Connector, Uninsulated
  (1)
• 1-1/4 in. EMT Set-Screw Coupling
  (2)
• 1-1/4 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 1-1/4 in. Flex Straight Squeeze Connector, Uninsulated
  (2)
• 1-1/4 in. Offset 3/4 in. Nipple
  (1)
• 1-1/4 in. Rigid/IMC 3-Piece Coupling
  (1)
• 1-1/4 in. Rigid/IMC Compression Connector
  (1)
• 1-1/4 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 1-1/4 in. Rigid/IMC Compression Coupling
  (1)
• 1-1/4 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 1-1/4 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 1-1/4 in. Rigid/IMC Set-Screw Coupling
  (1)
• 1-1/4 in. Sealing Washer, 5 per bag
  (1)
• 1-1/4 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 1-1/4 in. to 1 in. Reducing Washer
  (1)
• 1-1/4 in. to 1/2 in. Reducing Washer
  (1)
• 1-1/4 in. to 3/4 in. Reducing Washer
  (1)
• 1.25 in to 2 in Ground Clamp for 0.5 in Rigid Conduit, Bronze Alloy
  (1)
• 1.25 in to 2 in Ground Clamp for Bare Armored Ground Wires, Bronze Alloy
  (1)
• 1.25 in to 2 in Ground Clamp, for Bare Ground Wires, Bronze Alloy
  (1)
• 1.5 in to 1 in Ground Clamp, for Bare Ground Wires, Bronze Alloy
  (1)
• 1/1/4 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 1/2 in. 45 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 1/2 in. 90 Degree Flex/AC Squeeze Connector, Insulated
  (1)
• 1/2 in. 90 Degree Flex/AC Squeeze Connector, Uninsulated
  (1)
• 1/2 in. EMT 2-piece Connector
  (1)
• 1/2 in. EMT 90 Short Angle Connector
  (1)
• 1/2 in. EMT Compression Connector, Insulated
  (2)
• 1/2 in. EMT Compression Connector, Uninsulated
  (3)
• 1/2 in. EMT Compression Coupling
  (1)
• 1/2 in. EMT Indenter Connector, Insulated
  (1)
• 1/2 in. EMT Indenter Connector, Uninsulated
  (1)
• 1/2 in. EMT Indenter Coupling
  (1)
• 1/2 in. EMT Offset Compression Connector
  (1)
• 1/2 in. EMT Offset Connector
  (1)
• 1/2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 1/2 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 1/2 in. EMT Raintight Compression Coupling
  (1)
• 1/2 in. EMT Set-Screw Connector, Insulated
  (1)
• 1/2 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 1/2 in. EMT Set-Screw Coupling
  (2)
• 1/2 in. Flex Screw-In Connector
  (1)
• 1/2 in. Flex Screw-In Coupling
  (1)
• 1/2 in. Flex Set-Screw Connector
  (1)
• 1/2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 1/2 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 1/2 in. Flex to 1/2 in. EMT Screw-In/Compression Coupling
  (1)
• 1/2 in. Flex to 1/2 in. EMT Squeeze/Compression Coupling
  (1)
• 1/2 in. Flex/AC 90 Degree Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 1/2 in. Flex/AC Straight Squeeze Connector, Uninsulated
  (1)
• 1/2 in. MCI/MCI-A/AC/HCF Cable Connector
  (1)
• 1/2 in. REDI-LOC AC/MC Cable Connector
  (2)
• 1/2 in. REDI-LOC AC/MC Duplex Cable Connector
  (1)
• 1/2 in. REDI-LOCII AC/MC Cable Connector
  (1)
• 1/2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 1/2 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 1/2 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 1/2 in. Rigid/IMC Compression Coupling
  (1)
• 1/2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 1/2 in. Rigid/IMC or EMT Set-Screw Coupling
  (1)
• 1/2 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 1/2 in. Rigid/IMC Set-Screw Coupling
  (1)
• 1/2 in. Rigid/IMC to Flex Combination Coupling
  (1)
• 1/2 in. Sealing Washer
  (1)
• 1/2 in. THE INSIDER Nonmetallic Sheathed Cable Connector
  (1)
• 2 in. 90 Degree Flex Squeeze Connector, Insulated
  (1)
• 2 in. 90 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 2 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 2 in. EMT Compression Connector, Insulated
  (3)
• 2 in. EMT Compression Connector, Uninsulated
  (3)
• 2 in. EMT Compression Coupling
  (1)
• 2 in. EMT or 1-1/2 in. Rigid/IMC Clamp Back
  (1)
• 2 in. EMT or Rigid/IMC Clamp Back
  (1)
• 2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 2 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 2 in. EMT Set-Screw Connector, Insulated
  (2)
• 2 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 2 in. EMT Set-Screw Coupling
  (3)
• 2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 2 in. Flex Straight Squeeze Connector, Uninsulated
  (2)
• 2 in. Offset 3/4 in. Nipple
  (1)
• 2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 2 in. Rigid/IMC Compression Connector, Insulated
  (1)
• 2 in. Rigid/IMC Compression Coupling
  (1)
• 2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 2 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 2 in. Rigid/IMC Set-Screw Coupling
  (1)
• 2 in. Sealing Washer
  (1)
• 2 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 2 in. to 1 in. Reducing Washer
  (1)
• 2 in. to 1-1/2 in. Reducing Washer
  (1)
• 2 in. to 1-1/4 in. Reducing Washer
  (1)
• 2 in. to 3/4 in. Reducing Washer
  (1)
• 2-1/2 EMT in. Compression Coupling
  (1)
• 2-1/2 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 2-1/2 in. EMT Compression Connector, Insulated
  (3)
• 2-1/2 in. EMT Compression Connector, Uninsulated
  (2)
• 2-1/2 in. EMT Compression Coupling
  (2)
• 2-1/2 in. EMT or Rigid/IMC Clamp Back
  (1)
• 2-1/2 in. EMT or Rigid/IMC Set-Screw Connector, Insulated
  (2)
• 2-1/2 in. EMT or Rigid/IMC Set-Screw Coupling
  (2)
• 2-1/2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 2-1/2 in. EMT Raintight Compression Coupling
  (1)
• 2-1/2 in. EMT Set-Screw Connector, Uninsulated
  (1)
• 2-1/2 in. EMT Set-Screw Coupling
  (1)
• 2-1/2 in. Flex Squeeze Connector, Insulated
  (1)
• 2-1/2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 2-1/2 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 2-1/2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 2-1/2 in. Rigid/IMC Compression Connector
  (1)
• 2-1/2 in. Rigid/IMC Compression Coupling
  (1)
• 2-1/2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 2-1/2 in. to 1 in. Reducing Washer
  (1)
• 2-1/2 in. to 1-1/4 in. Reducing Washer
  (1)
• 2-1/2 in. to 2 in. Reducing Washer
  (1)
• 2-1/2. to 1-1/2 in. Reducing Washer
  (1)
• 2122B3
  (1)
• 2123B3
  (1)
• 2282B5
  (1)
• 2903B5
  (1)
• 2904RT-5
  (1)
• 3 EMT in. Compression Coupling
  (1)
• 3 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 3 in. EMT Compression Connector, Insulated
  (2)
• 3 in. EMT Compression Connector, Uninsulated
  (2)
• 3 in. EMT Compression Coupling
  (1)
• 3 in. EMT or Rigid/IMC Set-Screw Connector, Insulated
  (2)
• 3 in. EMT or Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 3 in. EMT or Rigid/IMC Set-Screw Coupling
  (2)
• 3 in. EMT Raintight Compression Connector, Insulated
  (1)
• 3 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 3 in. EMT Raintight Compression Coupling
  (1)
• 3 in. EMT Set-Screw Connector, Insulated
  (1)
• 3 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 3 in. EMT Set-Screw Coupling
  (1)
• 3 in. Flex Squeeze Connector, Insulated
  (1)
• 3 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 3 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 3 in. Rigid/IMC 3-Piece Coupling
  (1)
• 3 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 3 in. to 1-1/2 in. Reducing Washer
  (1)
• 3 in. to 1-1/4 in. Reducing Washer
  (1)
• 3 in. to 2 in. Reducing Washer
  (1)
• 3 in. to 2-1/2 in. Reducing Washer
  (1)
• 3-1/2 EMT in. Compression Coupling
  (1)
• 3-1/2 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 3-1/2 in. EMT Compression Connector, Insulated
  (2)
• 3-1/2 in. EMT Compression Connector, Uninsulated
  (2)
• 3-1/2 in. EMT Compression Coupling
  (1)
• 3-1/2 in. EMT or Rigid/IMC Clamp Back
  (1)
• 3-1/2 in. EMT or Rigid/IMC Set-Screw Connector, Insulated
  (2)
• 3-1/2 in. EMT or Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 3-1/2 in. EMT or Rigid/IMC Set-Screw Coupling
  (1)
• 3-1/2 in. EMT Raintight Compression Connector, Insulated
  (1)
• 3-1/2 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 3-1/2 in. EMT Raintight Compression Coupling
  (1)
• 3-1/2 in. EMT Set-Screw Connector, Insulated
  (1)
• 3-1/2 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 3-1/2 in. EMT Set-Screw Coupling
  (1)
• 3-1/2 in. Flex Squeeze Connector, Insulated
  (1)
• 3-1/2 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 3-1/2 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 3-1/2 in. Rigid/IMC 3-Piece Coupling
  (1)
• 3-1/2 in. Rigid/IMC Compression Connector
  (1)
• 3-1/2 in. Rigid/IMC Compression Coupling
  (1)
• 3-1/2 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 3-1/2 in. to 2 in. Reducing Washer
  (1)
• 3-1/2 in. to 2-1/2 in. Reducing Washer
  (1)
• 3-1/2 in. to 3 in. Reducing Washer
  (1)
• 3/4 in. 90 Degree Flex/AC Squeeze Connector, Insulated
  (1)
• 3/4 in. 90 Degree Flex/AC Squeeze Connector, Uninsulated
  (1)
• 3/4 in. EMT 2-piece Connector
  (1)
• 3/4 in. EMT 90 Short Angle Connector
  (1)
• 3/4 in. EMT Compression Connector, Insulated
  (2)
• 3/4 in. EMT Compression Connector, Uninsulated
  (2)
• 3/4 in. EMT Compression Coupling
  (1)
• 3/4 in. EMT Indenter Connector, Insulated
  (1)
• 3/4 in. EMT Offset Compression Connector
  (1)
• 3/4 in. EMT Offset Connector
  (1)
• 3/4 in. EMT or 1/2 in. Rigid/IMC Clamp Back
  (1)
• 3/4 in. EMT or Rigid/IMC Compression Threaded Coupling
  (1)
• 3/4 in. EMT Raintight Compression Connector, Insulated
  (1)
• 3/4 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 3/4 in. EMT Raintight Compression Coupling
  (1)
• 3/4 in. EMT Set-Screw Connector, Insulated
  (2)
• 3/4 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 3/4 in. EMT Set-Screw Coupling
  (1)
• 3/4 in. Flex Screw-In Connector
  (1)
• 3/4 in. Flex Screw-In Coupling
  (1)
• 3/4 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 3/4 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 3/4 in. Flex to 3/4 in. EMT Screw-In/Compression Coupling
  (1)
• 3/4 in. Flex to 3/4 in. EMT Squeeze/Compression Coupling
  (1)
• 3/4 in. Flex/AC 90 Degree Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 3/4 in. Flex/AC Straight Squeeze Connector, Uninsulated
  (1)
• 3/4 in. MCI/AC/HCF Cable Connector
  (1)
• 3/4 in. Offset 3/4 in. Nipple
  (1)
• 3/4 in. REDI-LOC AC/MC Cable Connector
  (1)
• 3/4 in. Rigid/IMC 3-Piece Coupling
  (1)
• 3/4 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 3/4 in. Rigid/IMC Compression Coupling
  (1)
• 3/4 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 3/4 in. Rigid/IMC or EMT Set-Screw Coupling
  (1)
• 3/4 in. Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 3/4 in. Rigid/IMC Set-Screw Coupling
  (1)
• 3/4 in. Rigid/IMC to Flex Combination Coupling
  (1)
• 3/4 in. Sealing Washer
  (1)
• 3/4 in. Service Entrance Cable Connector for Oval Cable
  (1)
• 3/4 in. to 1/2 in. Reducing Washer
  (1)
• 3/8 in. 90 Degree Flex/AC Squeeze Connector, Uninsulated
  (1)
• 3/8 in. 45 Degree Flex Squeeze Connector, Uninsulated
  (1)
• 3/8 in. 90 Degree Flex/AC Squeeze Connector, Insulated
  (1)
• 3/8 in. Armored Cable Connector, .402-.610
  (1)
• 3/8 in. Armored Cable Connector, .470- .610
  (1)
• 3/8 in. Flex Screw-In Connector
  (1)
• 3/8 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 3/8 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 3/8 in. Flex to 1/2 in. EMT Squeeze/Compression Coupling
  (1)
• 3/8 in. Flex/AC 90 Degree Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 3/8 in. Flex/AC Cable Set-Screw Connector
  (1)
• 3/8 in. Flex/AC Straight Squeeze Connector, Uninsulated
  (1)
• 3/8 in. Flex/AC/MC Duplex Connector
  (1)
• 3/8 in. Flex/AC/MC/NMSC Clamp Type Connector
  (1)
• 4 EMT in. Compression Coupling
  (1)
• 4 in. 90 Degree Flex Squeeze Connector, Uninsulated, for FMC/AC/MC Cable
  (1)
• 4 in. EMT Compression Connector, Insulated
  (3)
• 4 in. EMT Compression Connector, Uninsulated
  (3)
• 4 in. EMT Compression Coupling
  (2)
• 4 in. EMT or Rigid/IMC Clamp Back
  (1)
• 4 in. EMT or Rigid/IMC Set-Screw Connector, Insulated
  (2)
• 4 in. EMT or Rigid/IMC Set-Screw Connector, Uninsulated
  (1)
• 4 in. EMT or Rigid/IMC Set-Screw Coupling
  (2)
• 4 in. EMT Raintight Compression Connector, Insulated
  (1)
• 4 in. EMT Raintight Compression Connector, Uninsulated
  (1)
• 4 in. EMT Raintight Compression Coupling
  (1)
• 4 in. EMT Set-Screw Connector, Insulated
  (1)
• 4 in. EMT Set-Screw Connector, Uninsulated
  (2)
• 4 in. EMT Set-Screw Coupling
  (1)
• 4 in. Flex Squeeze Connector, Insulated
  (1)
• 4 in. Flex Straight Squeeze Connector, Insulated
  (1)
• 4 in. Flex Straight Squeeze Connector, Uninsulated
  (1)
• 4 in. Rigid/IMC 3-Piece Coupling
  (1)
• 4 in. Rigid/IMC Compression Connector, Uninsulated
  (1)
• 4 in. Rigid/IMC Compression Coupling
  (1)
• 4 in. Rigid/IMC or EMT Service Entrance Head
  (1)
• 4 in. to 2 in. Reducing Washer
  (1)
• 4 in. to 2-1/2 in. Reducing Washer
  (1)
• 4 in. to 3 in. Reducing Washer
  (1)
• 4714B10
  (1)
• 6 in. Rigid/IMC 3-Piece Coupling
  (1)
• Double 3/8 in. Armored Cable Connector, .460- .611
  (2)
• Floor Mount Connectors - Uninsulated
  (2)
• Floor Mount Couplings - Coupling
  (8)
• Nonmetallic 1 in. KO Sheathed Cable Connector
  (1)
• Nonmetallic 1/2 in. KO Sheathed Cable Connector (100-Pack)
  (1)
• Nonmetallic 3/4 in. KO Sheathed Cable Connector
  (1)
• SEU Cable Entrance Head 3 #3/0 - 3 #4/0, 1 #1/0 - 1 #2/0
  (1)
• SEU Cable Entrance Head 3 #8 - 3 #1, 1 #6 - 1 #3
  (1)