RJ jack and module
RJ jack and module
Bandwidth
-
250 MHz(1)
-
100 MHz(1)
Contact Material
-
Phosphor bronze alloy with 50 in gold-plating over 100 in nickel(10)
Current
-
2.1 (@ 72 degrees C) A(8)
-
2.1 (@ 161.6 F / 72 C) A(1)
Current Rating
-
1.5 (@ 20 degrees C) A(19)
-
1.5 (@ 20C) A(1)
-
2.1 (@ 72 degrees C) A(8)
-
2.1 (@ 161.6 F / 72 C) A(1)
Cutout
-
Cat6 RJ45 Punchdown(5)
Durability
-
700 mating cycles(19)
-
700 Cycles(1)
-
750 mating cycles(17)
-
750 Cycles(3)
-
Insertion/Extraction Life: 750 mating cycles(39)
Flammability Rating
-
UL Flammability Rating: UL 94V-0(1)
IDC
-
Phosphor Bronze Alloy with 100 in 100% Sn Alloy(36)
-
Phosphor Bronze Alloy with plated with 0.0001 in Sn alloy(16)
-
Phosphor Bronze Alloy with plated with 0.0001 -inches Sn alloy(2)
IDC Contact Resistance
-
2.5 (max) M-Ohms(54)
-
2.5 (max) MO(3)
IDC Material
-
Phosphor Bronze Alloy with 100 micro-inch 100% Sn Alloy F (C)(1)
Impedance
-
100O (+/- 15 @ 1-100 MHz, +/- 5 @ 100 MHz)(2)
Insulation Resistance
-
10 (min) M-Ohms(10)
Material
-
High Impact Flame Retardant Plastic(5)
Mating Cycles
-
>750(2)
Max Operating Voltage
-
125 VDC(1)
Max Tensile Load
-
100 N (at installation)(1)
Orientation
-
Vertical(5)
Performance Category
-
Cat 6(27)
-
Cat 5e(12)
PerformanceCategory
-
Cat 5e(21)
-
Cat 3(1)
-
Cat 5e, supports both T568A and T568B wiring schemes(9)
-
Cat 6, supports both T568A and T568B(9)
Resistance
-
500 (@ 100 VDC) M-Ohms(1)
Retention
-
30 (13.6) lbs (kg)(19)
-
30 lbs(1)
-
50 (11.24) for 60 sec (+/- 5 sec) N (lb av)(39)
-
50 N (11 lbs) for 60s +/- 5s(3)
-
50 (11.24) N (lb av)(17)
Size
-
0.312" H x 0.46" W x 0.885" D (7.925mm x 11.684mm x 22.479mm)(1)
-
0.315" H x 0.460" W x 0.85" D(1)
-
063 x 0.87 x 1.26 (16 x 22 x 32) in (mm)(4)
-
0.87?x0.67?x1.29?(5)
-
0.67 x 076 x 1.18 (17.02 x 19.30 x 29.97) in (mm)(14)
-
1.1 x 0.67 x 0.87 (27.95 x 16.90 x 22) in (mm)(1)
-
0.75 x 0.57 x 1.2 (19.15 x 14.4 x 30.5) in (mm)(2)
-
0.657 x 0.866 x 1.358 (16.7 x 22 x 34.5) in (mm)(18)
-
0.76 x 0.67 x 1.18 (19.30 x 16.9 x 30) in (mm)(29)
-
0.76 x 0.67 x 1.21 (19.30 x 16.9 x 31) in (mm)(10)
-
0.76 x 0.67 x 1.21 (19.30 x 16.90 x 31) in (mm)(1)
Spring Wire Contact
-
Phosphor Bronze Alloy with plated with 0.00005 microinches Gold over 0.00007 to 0.0001 microinches of Nickel(16)
-
Phosphor Bronze Alloy with plated with 0.00005 (Gold) over 0.00007 to 0.0001 (Nickel) -inches(2)
Termination
-
8P8C(78)
-
6P6C(1)
Total Mating Force
-
800 (for 8 wire leads min) g(19)
-
800 (minimum for 8 wire leads) g(1)
UL Listing Number
-
ANSI/UL 1863(1)
Wire Gauge
-
22 to 24 AWG(79)
Manufacturers
Products from this Category
Showing 118 results
Showing 118 results
