Electrical fittings

Amperage Rating

• 50 AMP
  (10)
• 30 AMP
  (1)

Bend Degree

• 90
  (31)
• 45
  (19)

Cable Entry

• Silver
  (20)
• Black
  (7)
• Through the fitting or conduit that the locknut is attached to
  (49)
• Used to cap EMT/RIGID and Bushings
  (6)
• Two piece steel clamp with tabs to insert through knockout
  (4)
• 2 screws w/sealing compound
  (2)
• Phenolic entrance to threaded exit for conduit
  (10)
• Steel Strap for use with Oval Service Cable Range: 3-2
  (1)
• Steel Strap for use with Oval Service Cable Range: 3-1/0 to 3-4/0
  (1)
• Phenolic entrance to single set screw exit for conduit
  (3)
• Phenolic entrance to 2 set screw exit for conduit
  (5)
• Phenolic entrance to Aluminum clamp type for Rigid/IMC
  (9)
• Phenolic entrance to Slip-fit set screw exit for conduit
  (2)
• Through Rigid conduit into throat of fitting
  (37)
• Through D-Ring
  (2)
• Does not Apply
  (2)
• Raised Mast entry
  (9)
• Screw-in entry for FMC
  (3)
• Lock-In tabs for NM cable
  (2)
• Steel Strap for use with Oval Service Cable Range: 2 -8, 6, 4, 2
  (1)
• Clamp to conduit. Entry through PVC head
  (6)
• Through conduit into expansion throat back to conduit
  (7)
• Push-In tabs for NM cable
  (2)
• Through Rigid conduit into throat of fitting. Flanged end for concrete forms.
  (3)
• Four screw strap fastens cable to connector body
  (7)
• Through Rigid conduit into expansion throat back to conduit
  (5)
• Two position/two screw hinge design which allows for a large cable range without needing separate bushings
  (7)
• (4) 19/64 IN Holes
  (2)
• (2) 3/8 IN, (3) 13/32 IN Holes
  (2)
• (2) 7/16 IN, (3) 1/2 IN Holes
  (2)
• (2) 27/64 IN, (3) 5/8 IN Holes
  (2)
• (1) 7/16 IN, (2) 19/32 IN, (3) 3/4 IN Holes
  (2)
• (1) 17/32 IN, (2) 3/4 IN, (3) 1 IN Holes
  (2)
• (1) 1 IN, (3) 7/8 IN, (3) 1-5/16 IN Holes
  (4)
• (3) 1-3/4 IN, (4) 1-1/8 IN Holes
  (3)
• (2) 1-1/8 IN, (4) 1-3/4 IN Holes
  (3)
• 0.88 IN Knock Out
  (1)
• 1.13 IN Knock Out
  (2)
• 1.38 IN Knock Out
  (2)
• 2 IN Knock Out
  (2)
• 2-1/2 IN Knock Out
  (2)

Certified Listed

• UL Listed
  (19)
• UL Listed;CSA Certified
  (2)

Classification

• ENT
  (1)

Color

• Silver
  (108)
• Gray
  (79)
• White
  (7)
• Black
  (26)
• Grey
  (11)
• yellow
  (11)
• Green/Gray
  (2)
• Metallic
  (5)

Conductor Range

• 0.150 IN X 0.325 IN - 0.250 IN X 0.425 IN (Oval Grommet)
  (1)
• 0.275 IN X 0.475 IN - 0.400 IN X 0.610 IN (Oval Grommet)
  (1)
• 0.165 IN X 0.575 IN - 0.290 IN X 0.710 IN (Oval Grommet)
  (1)
• 12/2 (.44" 0 min) to 10/3 (.53" 0 max)
  (1)
• 12/2 - 10/3
  (1)
• Recommended cable types 14/2 to 10/3 (.43"-.61" Dia.) Steel or Aluminum AC/MC/MCI-A/HCF/HCFMCI-A .
  (1)
• Recommended cable types 8/3 to 6/3 (.73"-.85" Dia.) Steel or Aluminum AC/AC90/ACG90/MC/MCI-A/HCF/HCFMCI-A.
  (1)
• 14/2 - 10/3
  (1)

Conduit Type

• Flexible Metal Conduit
  (15)

Connection

• L(2.860) x W(0.960) x H(1.000)
  (1)
• L(2.520) x W(0.810) x H(1.000)
  (1)
• Male Threaded X Clamp
  (1)
• Male Threaded x Compression
  (39)
• Male Threaded
  (57)
• Clamp-On
  (10)
• Female Threaded
  (79)
• Threadless
  (2)
• Set Screw
  (2)
• NPT Male (Hub), Female (Rigid Conduit and IMC-NPT)
  (2)
• Threaded
  (13)
• Tapered MNPT
  (32)
• Female Threaded X Male Threaded
  (17)
• Tapered FNPT
  (57)
• Tapered MNPT X Tapered FNPT
  (55)
• Snap-In
  (6)
• Tapered Male Threaded
  (4)
• Male Threaded X Set-Screw
  (9)
• 3/4 IN MNPT
  (1)
• 1 IN MNPT
  (1)
• M20 MNPT
  (1)
• 1/2 IN MNPT
  (1)
• 1/2-14 Female Tapered NPSM
  (2)
• 3/4-14 Female Tapered NPSM
  (2)
• 1-11-1/2 Female Tapered NPSM
  (2)
• 1-1/4-11-1/2 Female Tapered NPSM
  (2)
• 1-1/2-11-1/2 Female Tapered NPSM
  (2)
• 2-11-1/2 Female Tapered NPSM
  (2)
• 2-1/2 IN-8 Female Tapered NPSM
  (2)
• 3-8 Female Tapered NPSM
  (2)
• 4-8 Female Tapered NPSM
  (2)
• Tapered NPT
  (3)
• FNPT
  (7)
• Male X 1/2-14 Tapered FNPT
  (2)
• Male X 3/4-14 Tapered FNPT
  (2)
• Male X 1-11-1/2 Tapered FNPT
  (2)
• Male X 1-1/4-11-1/2 Tapered FNPT
  (2)
• Male X 1-1/2-11-1/2 Tapered FNPT
  (2)
• Male X 2-11-1/2 Tapered FNPT
  (2)
• Male X 2-1/2-8 Tapered FNPT
  (2)
• Male X 3-8 Tapered FNPT
  (2)
• Male X 3-1/2-8 Tapered FNPT
  (1)
• Male X 4-8 Tapered FNPT
  (2)
• Male Thread
  (1)
• Tapered FNPT Hub
  (4)
• Female Tapered threaded hubs NPT for Rigid and IMC Conduit
  (1)
• Tapered NPT Hub
  (1)
• 3/4 IN FNPT X 1/2 IN MNPT
  (1)
• 1 IN FNPT X 3/4 IN MNPT
  (1)
• 1-1/4 IN FNPT X 1 IN MNPT
  (1)
• FNPT X MNPSM
  (6)
• Threaded NPT
  (19)
• MNPS
  (17)
• FNPT X MNPT
  (3)
• FNPT X MNPS
  (3)
• Male NPS Hub X Set Screw
  (11)
• NPS Threads Male Hub
  (2)
• Male NPS Hub X Compression
  (12)
• Compression X MNPT Hub
  (7)
• Female/Female, Taperd Threads NPT
  (1)

Connector Type

• Jacketed MC/TECK
  (1)

Construction

• Die-cast
  (44)
• Porcelain, Steel
  (1)
• Sand Cast
  (2)
• Rugged Die-Cast
  (10)
• 0.96
  (1)
• 0.81
  (1)

Cubic Capacity

• 1.000 CU-IN
  (2)
• 0.74 CU-IN
  (1)
• 0.76 CU-IN
  (1)
• 3.1 CU-IN
  (1)
• 4.69 CU-IN
  (2)
• 9.38 CU-IN
  (1)
• 33.7 CU-IN
  (1)
• 91.23 CU-IN
  (1)
• 143.73 CU-IN
  (1)

Description - Long

• 3/4 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 3-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 4 in. Flex Double Bite Saddle Connector
  (1)
• 3/8 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 1 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 3/4 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 3/8 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector, Insulated
  (1)
• 1/2 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 1 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 1-1/4 in. Flex Double Bite Saddle Connector
  (1)
• 1-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 2 in. Flex Double Bite Saddle Connector
  (1)
• 2-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 3 in. Flex Double Bite Saddle Connector
  (1)
• 1/2 in. EMT - Flex, Squeeze/Set Screw, Combination Coupling
  (1)
• 3/4 in. EMT - Flex, Squeeze/Set Screw, Combination Coupling
  (1)
• 2-1/2 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 3 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 3-1/2 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 4 in. Rigid/IMC 3-Piece Coupling
  (1)
• 3/8 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector, Uninsulated
  (1)

Description - Short

• 3/4 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 3-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 4 in. Flex Double Bite Saddle Connector
  (1)
• 3/8 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 1/2 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 1 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 3/4 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 3/8 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector, Insulated
  (2)
• 1/2 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 1 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 1-1/4 in. Flex Double Bite Saddle Connector
  (1)
• 1-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 2 in. Flex Double Bite Saddle Connector
  (1)
• 2-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 3 in. Flex Double Bite Saddle Connector
  (1)
• 1/2 in. EMT - Flex, Squeeze/Set Screw, Combination Coupling
  (1)
• 3/4 in. EMT - Flex, Squeeze/Set Screw, Combination Coupling
  (1)
• 2-1/2 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 3 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 3-1/2 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 4 in. Rigid/IMC 3-Piece Coupling
  (1)

Description - Slang

• EMT Flex
  (2)
• 3-Piece Super Coupling
  (3)
• 3-Piece Coupling
  (1)

Dimensions

• 3.3750 IN X 3.2500 IN X 2.2500 IN
  (9)
• 5.3600 IN X 1.2500 IN X 0.0966 IN
  (2)
• 4.6875 IN X 1.6250 IN X 4.6875 IN
  (10)
• 1.0000 IN X 1.0000 IN X 1.0000 IN
  (311)
• 7.0000 IN X 2.0600 IN X 4.0000 IN
  (2)
• 1.6200 IN X 1.6200 IN X 3.5000 IN
  (1)
• 5.3700 IN X 1.6200 IN X 1.6200 IN
  (1)
• 7.2500 IN X 1.6200 IN X 1.6200 IN
  (5)
• 9.1200 IN X 1.6200 IN X 1.6200 IN
  (1)
• 3.5000 IN X 1.6200 IN X 3.5000 IN
  (9)
• 3.5000 IN X 1.6200 IN X 5.3700 IN
  (11)
• 5.3700 IN X 1.6200 IN X 3.5000 IN
  (2)
• 5.3700 IN X 1.6200 IN X 5.3700 IN
  (7)
• 5.3700 IN X 1.6200 IN X 9.1200 IN
  (1)
• 1.6200 IN X 1.6200 IN X 1.6200 IN
  (42)
• 6.6200 IN X 3.0000 IN X 5.0000 IN
  (1)
• 0.5000 IN X 1.5000 IN X 0.5000 IN
  (2)
• 0.7500 IN X 1.5000 IN X 0.7500 IN
  (2)
• 1.0000 IN X 1.5000 IN X 1.0000 IN
  (2)
• 1.2500 IN X 1.5000 IN X 1.2500 IN
  (2)
• 1.5000 IN X 1.5000 IN X 1.5000 IN
  (2)
• 2.0000 IN X 1.5000 IN X 2.0000 IN
  (2)
• 2.5000 IN X 1.5000 IN X 2.5000 IN
  (1)
• 3.0000 IN X 1.5000 IN X 3.0000 IN
  (1)
• 3.5000 IN X 1.5000 IN X 3.5000 IN
  (1)
• 1.2970 IN X 0.7550 IN X 0.6300 IN
  (4)
• 1.1750 IN X 0.3700 IN X 0.3700 IN
  (1)
• 1.7500 IN X 0.5000 IN X 0.5000 IN
  (1)
• X X 0.3280 IN
  (1)
• X X 0.4370 IN
  (1)
• X X 0.5480 IN
  (1)
• 0.0000 IN X X 1.6250 IN
  (2)
• X X 48.0000 IN
  (1)
• 48.0000 IN X 0.5000 IN X 0.5000 IN
  (1)
• 0.0000 IN X X 1.2500 IN
  (2)
• 0.0000 IN X X 1.5000 IN
  (3)
• 2.5000 IN X 1.2500 IN X 6.5000 IN
  (1)
• 5.6200 IN X 1.2500 IN X 10.0000 IN
  (1)
• 2.6800 IN X 0.8000 IN X 3.7800 IN
  (1)
• 4.0210 IN X 0.8370 IN X 3.3120 IN
  (1)
• 1.2500 IN X 1.6250 IN X 5.1250 IN
  (1)
• 8.7500 IN X 3.7190 IN X 1.2500 IN
  (2)
• 9.0000 IN X 3.7190 IN X 1.5000 IN
  (2)
• 9.0000 IN X 3.9690 IN X 1.7500 IN
  (1)
• 10.0630 IN X 4.4690 IN X 2.5000 IN
  (1)
• 1.3750 IN X 0.6250 IN X 2.1250 IN
  (2)
• 11.0000 IN X 2.5000 IN X 7.0000 IN
  (1)
• 7.2500 IN X 2.5230 IN X 11.0000 IN
  (1)
• 11.0000 IN X 2.5000 IN X 7.2500 IN
  (1)
• 11.0000 IN X 1.1250 IN X 8.0000 IN
  (1)
• 1.1200 IN X 7.5200 IN X 11.0000 IN
  (1)
• 8.0000 IN X 7.1250 IN X 7.7800 IN
  (1)
• 3.2000 IN X 1.2500 IN X 4.0200 IN
  (1)
• 3.7000 IN X 1.2500 IN X 4.5300 IN
  (1)
• 4.2300 IN X 1.2500 IN X 5.0500 IN
  (1)
• 4.7300 IN X 1.2500 IN X 5.5500 IN
  (1)
• 5.0480 IN X 1.2500 IN X 0.0635 IN
  (1)
• 6.7030 IN X 1.2500 IN X 0.0677 IN
  (1)
• 0.0000 IN X X 1.0000 IN
  (2)
• 0.0000 IN X X 0.5000 IN
  (1)
• X X 0.8750 IN
  (3)
• X X 0.7500 IN
  (9)
• 18.0000 IN X 1.6200 IN X 4.6200 IN
  (2)
• 24.0000 IN X 1.6200 IN X 4.6200 IN
  (1)
• 436.0000 IN X 1.0000 IN X 0.0200 IN
  (1)
• X X 3.0000 IN
  (8)
• 2.3750 IN X 0.5630 IN X 2.3750 IN
  (1)
• 2.7500 IN X 0.7500 IN X 2.7500 IN
  (1)
• 2.1880 IN X 2.0000 IN X 2.1880 IN
  (4)
• 3.0000 IN X 2.0000 IN X 3.0000 IN
  (1)
• 4.0000 IN X 2.0000 IN X 3.0000 IN
  (1)
• 3.0000 IN X 3.0000 IN X 3.0000 IN
  (2)
• 1.3750 IN X 0.6250 IN X 1.4380 IN
  (1)
• 1.8250 IN X 0.7500 IN X 1.8750 IN
  (1)
• 12.0000 IN X 2.0000 IN X 15.0000 IN
  (1)
• 20.0000 FT X 1.5800 IN X 0.1040 IN
  (1)
• X X 2.5100 IN
  (2)
• X X 3.2100 IN
  (1)
• X X 3.7700 IN
  (2)
• X X 4.2800 IN
  (1)
• 1.5200 IN X 1.2500 IN X 2.2500 IN
  (4)
• 4.6200 IN X 1.6200 IN X 3.0000 IN
  (1)
• 1.2500 IN X 1.6200 IN X 1.6200 IN
  (10)
• 3.0000 IN X 0.3750 IN X 3.4000 IN
  (2)
• 2.8750 IN X 2.8750 IN X 2.8750 IN
  (5)
• 5.0000 IN X 6.5000 IN X 5.0000 IN
  (1)
• 3.1250 IN X 3.1250 IN X 3.1250 IN
  (2)
• 4.2500 IN X 4.2500 IN X 4.5000 IN
  (1)
• 6.5000 IN X 6.5000 IN X 6.5000 IN
  (1)
• 5.0000 IN X 1.5000 IN X 5.0000 IN
  (1)
• 4.2500 IN X 4.2500 IN X 4.2500 IN
  (1)
• 2.8750 IN X 0.6880 IN X 2.8750 IN
  (1)
• 2.4600 IN X 1.2500 IN X 3.2800 IN
  (2)
• 1.0000 IN X 0.1600 IN X 2.7500 IN
  (1)
• 2.7000 IN X 1.2500 IN X 3.5200 IN
  (4)
• 1.6250 IN X 1.6250 IN X 1.6250 IN
  (1)
• 2.1000 IN X 1.6250 IN X 1.6250 IN
  (1)
• 3.2400 IN X 1.6200 IN X 3.2400 IN
  (1)
• 4.5610 IN X 1.2500 IN X 0.0635 IN
  (1)
• 5.2920 IN X 1.2500 IN X 0.0677 IN
  (1)
• 6.1470 IN X 1.2500 IN X 0.0677 IN
  (1)
• X X 12.7000 IN
  (1)
• X X 15.9000 IN
  (2)
• X X 19.0000 IN
  (1)
• X X 22.2000 IN
  (1)
• 8.0000 IN X 5.2500 IN X 3.3750 IN
  (1)
• 0.9700 IN X 0.8440 IN X 0.4850 IN
  (1)
• 1.6000 IN X 1.5900 IN X 0.5000 IN
  (2)
• 1.6100 IN X 0.8300 IN X 0.5000 IN
  (1)
• 1.6000 IN X 0.8300 IN X 0.5000 IN
  (1)
• X X 7.5000 IN
  (4)
• X X 1.8600 IN
  (1)
• X X 1.9900 IN
  (2)
• X X 2.2500 IN
  (4)
• X X 5.0500 IN
  (1)
• X X 5.5500 IN
  (1)
• X X 8.6900 IN
  (1)
• X X 6.0500 IN
  (1)
• X X 8.2400 IN
  (1)
• X X 10.0600 IN
  (1)
• 1.7800 IN X 1.2500 IN X 2.5100 IN
  (4)
• 1.9600 IN X 1.2500 IN X 2.7400 IN
  (2)
• 2.3300 IN X 1.2500 IN X 3.1300 IN
  (1)
• X X 11.7500 IN
  (3)
• 3.1100 IN X 1.2500 IN X 3.9100 IN
  (1)
• 3.6100 IN X 1.2500 IN X 4.4200 IN
  (1)
• 6.7400 IN X 1.2500 IN X 7.6200 IN
  (1)
• 5.0000 IN X 3.2500 IN X 5.3120 IN
  (1)
• 2.0000 IN X 0.5000 IN X 1.0000 IN
  (2)
• 1.6200 IN X 1.6200 IN X 4.0000 IN
  (1)
• X X 1.6200 IN
  (1)
• 5.0000 IN X 3.0000 IN X 5.0000 IN
  (1)
• 2.2500 IN X 2.2500 IN X 0.7500 IN
  (3)
• 2.6250 IN X 2.5000 IN X 0.7500 IN
  (2)
• 2.7500 IN X 2.7240 IN X 0.7500 IN
  (3)
• X X 2.8750 IN
  (1)
• 3.2120 IN X 3.0000 IN X 0.7500 IN
  (3)
• 3.3900 IN X 3.2500 IN X 0.7500 IN
  (4)
• 4.5940 IN X 3.7500 IN X 0.7500 IN
  (4)
• 5.4380 IN X 4.5630 IN X 1.0000 IN
  (4)
• 6.1700 IN X 5.0630 IN X 1.0000 IN
  (4)
• 6.8950 IN X 5.8130 IN X 1.2500 IN
  (2)
• X X 7.2500 IN
  (2)
• 7.7240 IN X 6.0630 IN X 1.2500 IN
  (3)
• 8.8510 IN X 7.3750 IN X 1.2500 IN
  (4)
• 10.4080 IN X 10.0000 IN X 1.5000 IN
  (4)
• 12.9380 IN X 11.0000 IN X 1.7500 IN
  (4)
• 15.5000 IN X 14.8750 IN X 1.7500 IN
  (2)
• 17.8750 IN X 17.5000 IN X 1.7500 IN
  (3)
• 19.6250 IN X 18.6250 IN X 2.0000 IN
  (2)
• 21.6560 IN X 21.2500 IN X 2.5000 IN
  (2)
• 25.2500 IN X 23.6250 IN X 2.5000 IN
  (2)
• 29.1250 IN X 26.5000 IN X 3.0000 IN
  (2)
• 33.1250 IN X 30.5000 IN X 3.0000 IN
  (2)
• X X 6.5000 IN
  (1)
• 2.4060 IN X 2.0000 IN X 0.7500 IN
  (2)
• 2.7500 IN X 2.2500 IN X 0.8750 IN
  (3)
• 2.9690 IN X 2.5000 IN X 0.8750 IN
  (2)
• 3.7500 IN X 2.7500 IN X 0.8750 IN
  (2)
• 4.2810 IN X 3.0000 IN X 0.8750 IN
  (2)
• 4.6410 IN X 3.5000 IN X 0.8750 IN
  (2)
• 6.7190 IN X 4.3130 IN X 1.2500 IN
  (2)
• 6.4840 IN X 4.8130 IN X 1.0000 IN
  (2)
• 7.5940 IN X 5.8130 IN X 1.2500 IN
  (1)
• X X 6.9375 IN
  (1)
• 7.8910 IN X 6.3130 IN X 1.0000 IN
  (2)
• 2.2500 IN X 2.0000 IN X 0.7500 IN
  (1)
• 2.3750 IN X 2.0000 IN X 0.7500 IN
  (1)
• 3.0310 IN X 2.5000 IN X 0.8750 IN
  (1)
• 3.7500 IN X 3.0000 IN X 0.8750 IN
  (1)
• 5.3130 IN X 3.2500 IN X 0.8750 IN
  (1)
• 6.6250 IN X 4.8130 IN X 1.2500 IN
  (1)
• 6.9690 IN X 5.3130 IN X 1.2500 IN
  (1)
• 5.3970 IN X 3.7500 IN X 0.7500 IN
  (1)
• X X 7.7500 IN
  (1)
• 3.0210 IN X 2.1420 IN X 1.0870 IN
  (1)
• X X 9.3750 IN
  (1)
• 4.7500 IN X 2.8750 IN X 4.7500 IN
  (1)
• 5.5000 IN X 3.0000 IN X 6.5938 IN
  (2)
• 6.6250 IN X 3.8750 IN X 6.6250 IN
  (2)
• 7.2500 IN X 4.3750 IN X 7.2500 IN
  (1)
• 7.8750 IN X 4.8750 IN X 7.8750 IN
  (2)
• 9.1875 IN X 5.9375 IN X 9.1875 IN
  (1)
• 10.3750 IN X 7.0000 IN X 10.3750 IN
  (3)
• 12.6250 IN X 9.0000 IN X 12.6250 IN
  (3)
• 14.9375 IN X 11.1250 IN X 14.9375 IN
  (3)
• 7.3750 IN X 13.3750 IN X 7.3750 IN
  (3)
• 8.2500 IN X 14.5000 IN X 8.2500 IN
  (2)
• 20.7500 IN X 16.3750 IN X 20.7500 IN
  (2)
• 23.6875 IN X 18.3750 IN X 23.6875 IN
  (2)
• 25.6875 IN X 20.3750 IN X 25.6875 IN
  (2)
• 4.1250 IN X 4.1250 IN X 2.6250 IN
  (2)
• 4.8750 IN X 4.8750 IN X 3.1250 IN
  (1)
• 5.5000 IN X 5.5000 IN X 3.7500 IN
  (2)
• 6.1250 IN X 6.1250 IN X 4.2500 IN
  (2)
• 6.7500 IN X 6.7500 IN X 4.7500 IN
  (2)
• 8.0625 IN X 8.0625 IN X 5.8125 IN
  (2)
• 9.5625 IN X 9.5625 IN X 6.8750 IN
  (2)
• 11.9375 IN X 11.9375 IN X 8.8750 IN
  (2)
• 14.0625 IN X 14.0625 IN X 11.0000 IN
  (2)
• 15.8125 IN X 15.8125 IN X 13.0000 IN
  (3)
• 17.7500 IN X 8.2500 IN X 14.2500 IN
  (2)
• 19.7500 IN X 19.7500 IN X 16.2500 IN
  (2)
• 21.8750 IN X 19.7500 IN X 18.2500 IN
  (2)
• 24.2500 IN X 24.2500 IN X 20.2500 IN
  (3)
• 35.5000 IN X 35.5000 IN X 30.2500 IN
  (2)
• 8.3750 IN X 6.0000 IN X 5.6250 IN
  (1)
• 9.8750 IN X 9.0000 IN X 5.0938 IN
  (2)
• 8.0000 IN X 8.0000 IN X 8.3750 IN
  (3)
• 10.9375 IN X 8.0000 IN X 9.9063 IN
  (2)
• 12.3750 IN X 10.0000 IN X 12.0938 IN
  (1)
• 13.5000 IN X 10.7500 IN X 13.2188 IN
  (2)
• 5.1250 IN X 8.0000 IN X 16.0000 IN
  (1)
• 20.0000 IN X 9.0000 IN X 19.9063 IN
  (2)
• 11.2500 IN X 7.5000 IN X 7.0000 IN
  (3)
• 10.6250 IN X 6.8750 IN X 12.7500 IN
  (1)
• 13.0000 IN X 8.0000 IN X 9.9063 IN
  (1)
• 14.6250 IN X 10.0000 IN X 12.0938 IN
  (1)
• 4.6250 IN X 1.2500 IN X 2.2813 IN
  (1)
• 5.3750 IN X 2.5000 IN X 2.5625 IN
  (1)
• 6.0000 IN X 3.0000 IN X 2.8438 IN
  (1)
• 7.2500 IN X 4.0000 IN X 3.6875 IN
  (1)
• 8.4375 IN X 5.0000 IN X 4.1875 IN
  (1)
• 9.7500 IN X 6.0000 IN X 4.7188 IN
  (3)
• 12.0000 IN X 8.0000 IN X 5.5313 IN
  (3)
• 14.4375 IN X 10.0000 IN X 4.1250 IN
  (2)
• 5.5000 IN X 12.0000 IN X 4.9063 IN
  (3)
• 18.2500 IN X 14.0000 IN X 8.7500 IN
  (3)
• 21.0000 IN X 16.0000 IN X 9.6250 IN
  (2)
• 23.0000 IN X 20.0000 IN X 10.4375 IN
  (2)
• 25.0000 IN X 10.0000 IN X 11.5000 IN
  (2)
• 4.1250 IN X 2.0000 IN X 4.9063 IN
  (1)
• 4.8750 IN X 2.5000 IN X 12.9375 IN
  (1)
• 11.9375 IN X 8.0000 IN X 14.4688 IN
  (2)
• 14.0625 IN X 10.0000 IN X 6.7500 IN
  (2)
• 15.8125 IN X 12.0000 IN X 7.8125 IN
  (2)
• 17.7500 IN X 14.0000 IN X 16.1250 IN
  (1)
• 19.7500 IN X 16.0000 IN X 22.7188 IN
  (1)
• 21.8750 IN X 18.0000 IN X 23.2500 IN
  (1)
• 24.2500 IN X 20.0000 IN X 23.7500 IN
  (1)
• 4.7500 IN X 2.1250 IN X 5.0000 IN
  (2)
• 5.8750 IN X 4.0000 IN X 6.0000 IN
  (3)
• 8.7500 IN X 6.3750 IN X 6.0000 IN
  (2)
• 12.5000 IN X 11.3750 IN X 8.0000 IN
  (2)
• 2.0000 IN X 1.1300 IN X 2.2100 IN
  (1)
• 0.1875 IN X 1.2500 IN X 2.2500 IN
  (1)
• X X 1.5300 IN
  (1)
• X X 1.6500 IN
  (1)
• X X 1.8700 IN
  (2)
• X X 2.0000 IN
  (7)
• X X 2.2100 IN
  (2)
• X X 2.7500 IN
  (4)
• X X 3.2800 IN
  (2)
• X X 3.5600 IN
  (2)
• X X 4.3100 IN
  (2)
• X X 4.8700 IN
  (1)
• X X 5.8100 IN
  (2)
• X X 6.9300 IN
  (2)
• X X 8.6800 IN
  (1)
• X X 9.7500 IN
  (1)
• 3.2490 IN X 1.1100 IN X 0.9510 IN
  (1)
• 3.2340 IN X 1.2340 IN X 0.9510 IN
  (1)
• 3.1400 IN X 1.4060 IN X 0.9510 IN
  (1)
• 3.4220 IN X 1.6560 IN X 0.9510 IN
  (1)
• 3.7340 IN X 1.9060 IN X 0.9510 IN
  (1)
• 4.0310 IN X 2.3120 IN X 0.9510 IN
  (1)
• 5.6500 IN X 2.9470 IN X 1.1750 IN
  (1)
• 5.9770 IN X 3.3220 IN X 1.1750 IN
  (1)
• X X 4.4375 IN
  (1)
• 7.3530 IN X 4.4000 IN X 1.1750 IN
  (1)
• 1.3980 IN X 0.8810 IN X 2.5000 IN
  (1)
• 2.5890 IN X 0.8840 IN X 3.6050 IN
  (1)
• 0.7220 IN X 0.8540 IN X 1.5510 IN
  (1)
• 0.9800 IN X 0.8730 IN X 1.9270 IN
  (1)
• 1.2390 IN X 0.8770 IN X 2.2710 IN
  (1)
• X X 2.3125 IN
  (1)
• 1.7700 IN X 0.8750 IN X 2.9000 IN
  (1)
• 2.4550 IN X 0.8450 IN X 3.3390 IN
  (1)
• X X 4.8125 IN
  (1)
• X X 6.1875 IN
  (1)
• X X 3.6300 IN
  (2)
• X X 3.4000 IN
  (2)
• X X 3.7500 IN
  (3)
• X X 4.2500 IN
  (2)
• X X 4.7500 IN
  (2)
• X X 10.0000 IN
  (2)
• X X 12.5000 IN
  (2)
• X X 15.0000 IN
  (2)
• X X 20.0000 IN
  (2)
• X X 13.4000 IN
  (2)
• X X 16.6300 IN
  (2)
• X X 18.2500 IN
  (2)
• X X 19.2500 IN
  (1)
• X X 12.6300 IN
  (1)
• 2.0290 IN X 0.6060 IN X 1.2070 IN
  (1)
• 2.2590 IN X 0.6270 IN X 1.4170 IN
  (1)
• 2.2220 IN X 0.6230 IN X 1.4460 IN
  (1)
• 2.4090 IN X 0.5740 IN X 1.6100 IN
  (2)
• 2.7190 IN X 0.6020 IN X 1.8930 IN
  (2)
• 3.0750 IN X 0.6940 IN X 12.3100 IN
  (1)
• 3.0750 IN X 0.6940 IN X 2.3100 IN
  (1)
• 3.5290 IN X 0.6730 IN X 2.5020 IN
  (2)
• 3.8520 IN X 0.6790 IN X 3.0730 IN
  (2)
• 4.6680 IN X 0.8790 IN X 3.7080 IN
  (1)
• 5.3350 IN X 0.8990 IN X 4.4640 IN
  (1)
• 1.5720 IN X 0.5720 IN X 1.0500 IN
  (1)
• 2.1610 IN X 0.5920 IN X 1.3560 IN
  (1)
• 2.4680 IN X 0.6050 IN X 1.5850 IN
  (1)
• 2.7440 IN X 0.5780 IN X 1.8350 IN
  (1)
• 3.0430 IN X 0.5810 IN X 2.1030 IN
  (1)
• 3.6150 IN X 0.6470 IN X 2.6670 IN
  (1)
• 1.8120 IN X 1.3440 IN X 0.5630 IN
  (2)
• 2.0470 IN X 1.5620 IN X 0.5630 IN
  (2)
• 2.2500 IN X 1.7500 IN X 0.5630 IN
  (2)
• 2.6880 IN X 2.1880 IN X 0.5630 IN
  (2)
• 2.9530 IN X 2.5000 IN X 0.5630 IN
  (2)
• 3.2810 IN X 2.8120 IN X 0.5630 IN
  (2)
• 3.8130 IN X 3.2500 IN X 0.5630 IN
  (2)
• 4.7500 IN X 3.9380 IN X 0.7190 IN
  (2)
• 5.5630 IN X 4.6240 IN X 0.7810 IN
  (2)
• 6.6880 IN X 5.7500 IN X 1.1880 IN
  (2)
• 1.6720 IN X 1.0940 IN X 0.5470 IN
  (1)
• 1.7810 IN X 1.4380 IN X 0.5470 IN
  (1)
• 1.9380 IN X 1.7820 IN X 0.5470 IN
  (1)
• 2.2810 IN X 2.0620 IN X 0.5470 IN
  (1)
• 2.6250 IN X 2.2500 IN X 0.5470 IN
  (1)
• 2.9060 IN X 2.5000 IN X 0.5470 IN
  (1)
• 3.4380 IN X 3.0000 IN X 0.5470 IN
  (1)
• 2.8750 IN X 1.3750 IN X 0.1880 IN
  (2)
• 2.8750 IN X 1.3750 IN X 0.5000 IN
  (3)
• X X 2.6880 IN
  (2)
• X X 2.6300 IN
  (1)
• X X 1.6875 IN
  (1)
• X X 3.6250 IN
  (3)
• X X 3.3750 IN
  (1)
• 1.5000 IN X 1.5000 IN X 5.2500 IN
  (1)
• 0.5630 IN X 0.6250 IN X 2.0636 IN
  (1)
• 0.6800 IN X 0.5000 IN X 2.0630 IN
  (1)
• 0.7500 IN X 0.6250 IN X 2.0630 IN
  (1)
• 0.8750 IN X 0.6250 IN X 2.8750 IN
  (1)
• 0.8750 IN X 0.7500 IN X 3.0000 IN
  (1)
• X X 1.3750 IN
  (5)
• X X 1.1250 IN
  (3)
• X X 1.5000 IN
  (12)
• X X 3.8700 IN
  (2)
• 4.0000 IN X 0.2940 IN X 4.2500 IN
  (1)
• 2.5000 IN X 0.5600 IN X 4.2500 IN
  (1)
• 4.2500 IN X 0.5600 IN X 5.3400 IN
  (1)
• 0.7500 IN X 1.0000 IN X 4.5000 IN
  (1)
• 1.0000 IN X 0.1500 IN X 4.5000 IN
  (1)
• 8.0000 IN X 0.5000 IN X 1.2500 IN
  (1)
• X X 1.0000 IN
  (14)
• X X 1.7500 IN
  (2)
• X X 2.5000 IN
  (6)
• X X 4.5000 IN
  (2)
• 3.7500 IN X 0.7520 IN X 4.5300 IN
  (1)
• 4.2500 IN X 0.5600 IN X 8.1800 IN
  (1)
• 4.2500 IN X 0.5600 IN X 11.0200 IN
  (1)
• 2.0000 IN X 1.2500 IN X 2.5000 IN
  (1)
• 120.0000 IN X 1.6000 IN X 3.1000 IN
  (1)
• 240.0000 IN X 1.6000 IN X 3.1000 IN
  (1)
• 120.0000 IN X 1.6000 IN X 2.8000 IN
  (1)
• 240.0000 IN X 1.6000 IN X 2.8000 IN
  (1)
• 1.2500 IN X 0.3125 IN X 1.2500 IN
  (8)
• 1.3750 IN X 1.2300 IN X 0.8500 IN
  (5)
• 1.3750 IN X 0.8500 IN X 0.8500 IN
  (4)
• 1.3750 IN X 0.8500 IN X 0.2500 IN
  (10)
• 1.3750 IN X 0.8500 IN X 0.3750 IN
  (5)
• 1.8750 IN X 1.3750 IN X 0.8500 IN
  (13)
• 1.7500 IN X 1.3750 IN X 0.8500 IN
  (10)
• 2.0000 IN X 1.3750 IN X 0.5000 IN
  (2)
• 1.3750 IN X 1.2300 IN X 1.2300 IN
  (1)
• 1.3750 IN X 0.8500 IN X 0.7000 IN
  (2)
• 1.3750 IN X 0.8500 IN X 0.8250 IN
  (2)
• 1.3750 IN X 0.3750 IN X 0.8500 IN
  (1)
• 2.0000 IN X 1.3750 IN X 0.8500 IN
  (1)
• 2.0000 IN X 1.3100 IN X 0.8500 IN
  (4)
• 1.3750 IN X 1.3750 IN X 0.8500 IN
  (1)
• 1.3750 IN X 1.2300 IN X 0.5000 IN
  (1)
• 0.9200 IN X 0.7210 IN X 0.4250 IN
  (6)
• 0.7210 IN X 0.6700 IN X 0.4250 IN
  (3)
• 1.0000 IN X 1.3100 IN X 0.8500 IN
  (2)
• 1.2500 IN X 1.3100 IN X 0.8500 IN
  (3)
• 2.6250 IN X 1.3100 IN X 0.8500 IN
  (1)
• 2.8750 IN X 1.3100 IN X 0.8500 IN
  (1)
• 1.0000 IN X 1.6250 IN X 0.8250 IN
  (2)
• 1.5000 IN X 0.6250 IN X 1.5000 IN
  (1)
• X X 1.2500 IN
  (13)
• X X 0.5000 IN
  (5)
• 0.9380 IN X 0.5060 IN X 0.4380 IN
  (1)
• 0.7490 IN X 0.7490 IN X 0.0800 IN
  (1)
• 1.4050 IN X 1.4050 IN X 0.1320 IN
  (1)
• 1.7800 IN X 1.7800 IN X 0.1600 IN
  (1)
• 0.4890 IN X 0.4890 IN X 0.0620 IN
  (1)
• 0.5830 IN X 0.5830 IN X 0.0780 IN
  (1)
• 0.6830 IN X 0.6830 IN X 0.0940 IN
  (1)
• 0.8730 IN X 0.8730 IN X 0.1250 IN
  (1)
• 1.0790 IN X 1.0790 IN X 0.1560 IN
  (1)
• 0.5050 IN X 0.4380 IN X 0.2260 IN
  (1)
• 0.5770 IN X 0.5000 IN X 0.2730 IN
  (1)
• 0.6500 IN X 0.5620 IN X 0.3370 IN
  (1)
• 0.8660 IN X 0.7500 IN X 0.4480 IN
  (1)
• 0.6500 IN X 0.5620 IN X 0.7500 IN
  (1)
• 1.2800 IN X 1.2800 IN X 0.0800 IN
  (2)
• 1.5000 IN X 1.5000 IN X 0.0800 IN
  (1)
• 1.5300 IN X 1.5300 IN X 0.0800 IN
  (1)
• 2.0300 IN X 2.0300 IN X 0.0800 IN
  (1)
• 2.3100 IN X 1.6200 IN X 2.3100 IN
  (5)
• 3.5000 IN X 1.6200 IN X 2.2500 IN
  (4)
• 4.1200 IN X 1.6200 IN X 4.1200 IN
  (5)
• 4.1250 IN X 1.6250 IN X 3.5000 IN
  (10)
• 3.5000 IN X 1.6200 IN X 1.6200 IN
  (3)
• 3.5000 IN X 1.6200 IN X 1.0000 IN
  (1)
• 3.5000 IN X 1.6200 IN X 2.4300 IN
  (1)
• 3.5000 IN X 1.6200 IN X 0.8110 IN
  (1)
• 5.4300 IN X 1.6200 IN X 1.6200 IN
  (4)
• 5.4300 IN X 1.6200 IN X 3.2500 IN
  (4)
• 3.5000 IN X 1.6200 IN X 2.1200 IN
  (1)
• 1.6200 IN X 1.6200 IN X 1.8700 IN
  (1)
• 6.6200 IN X 1.6200 IN X 3.7400 IN
  (1)
• 8.6200 IN X 1.8700 IN X 3.7500 IN
  (1)
• 3.7500 IN X 1.6200 IN X 3.9300 IN
  (6)
• 5.4300 IN X 1.6200 IN X 1.3700 IN
  (1)
• 5.4300 IN X 1.6200 IN X 2.4300 IN
  (1)
• 5.4300 IN X 1.6200 IN X 1.0000 IN
  (1)
• 5.4300 IN X 1.6200 IN X 0.8110 IN
  (2)
• 3.5000 IN X 1.6200 IN X 4.1200 IN
  (2)
• 3.5000 IN X 1.6200 IN X 2.0600 IN
  (4)
• 3.5000 IN X 1.6200 IN X 3.9300 IN
  (1)
• 5.3700 IN X 3.5000 IN X 3.9300 IN
  (2)
• 5.4300 IN X 1.6800 IN X 2.0600 IN
  (4)
• 9.1800 IN X 1.6800 IN X 3.9300 IN
  (5)
• 5.4300 IN X 1.6800 IN X 3.9300 IN
  (4)
• 3.5000 IN X 1.6200 IN X 2.3100 IN
  (1)
• 3.5000 IN X 3.5000 IN X 4.2000 IN
  (1)
• 3.5000 IN X 1.6200 IN X 0.2300 IN
  (3)
• 3.9300 IN X 1.8700 IN X 3.5000 IN
  (2)
• 3.5000 IN X 1.6200 IN X 4.2000 IN
  (3)
• 7.6200 IN X 1.6200 IN X 7.6200 IN
  (1)
• 6.5000 IN X 1.6200 IN X 0.2300 IN
  (2)
• 5.3700 IN X 1.6200 IN X 0.2300 IN
  (2)
• 5.3700 IN X 3.5000 IN X 3.5000 IN
  (1)
• 5.3700 IN X 3.5000 IN X 0.2200 IN
  (5)
• 3.2500 IN X 1.6200 IN X 2.3700 IN
  (2)
• 4.4830 IN X 2.3500 IN X 1.6200 IN
  (4)
• 4.4800 IN X 2.3500 IN X 1.6200 IN
  (4)
• 2.5000 IN X 1.6200 IN X 3.1800 IN
  (1)
• 4.3700 IN X 1.6200 IN X 3.3100 IN
  (3)
• 7.2400 IN X 1.6800 IN X 1.6200 IN
  (3)
• 7.2400 IN X 1.6800 IN X 0.8100 IN
  (1)
• 7.2400 IN X 2.1200 IN X 0.8100 IN
  (2)
• 5.3700 IN X 2.1200 IN X 0.8100 IN
  (1)
• 3.5000 IN X 2.1200 IN X 0.8100 IN
  (1)
• 3.5000 IN X 2.1200 IN X 1.6200 IN
  (1)
• 5.3700 IN X 2.1200 IN X 1.6200 IN
  (1)
• 7.2400 IN X 2.1200 IN X 1.6200 IN
  (4)
• 7.2400 IN X 2.1200 IN X 2.4300 IN
  (1)
• 7.2400 IN X 2.1200 IN X 3.2500 IN
  (2)
• 3.3100 IN X 1.8700 IN X 3.3100 IN
  (1)
• 12.0000 IN X 1.6200 IN X 3.4300 IN
  (3)
• 16.0000 IN X 1.6200 IN X 4.4300 IN
  (2)
• 18.0000 IN X 1.6200 IN X 4.9300 IN
  (2)
• 6.0000 IN X 1.6200 IN X 1.9300 IN
  (2)
• 8.0000 IN X 1.6200 IN X 2.4300 IN
  (2)
• 10.0000 IN X 1.6200 IN X 2.9300 IN
  (3)
• 9.0000 IN X 1.6200 IN X 4.0000 IN
  (2)
• 12.0000 IN X 1.6200 IN X 4.0000 IN
  (1)
• 15.0000 IN X 1.6200 IN X 4.0000 IN
  (1)
• 24.0000 IN X 1.6200 IN X 6.0000 IN
  (1)
• 3.7500 IN X 1.6200 IN X 6.3700 IN
  (1)
• 18.0000 IN X 1.6200 IN X 5.3700 IN
  (2)
• 24.0000 IN X 1.6200 IN X 5.3700 IN
  (2)
• 6.0000 IN X 1.6200 IN X 3.5000 IN
  (5)
• 12.0000 IN X 1.6200 IN X 3.5000 IN
  (6)
• 1.6200 IN X 1.6200 IN X 1.0100 IN
  (1)
• 1.6200 IN X 1.6200 IN X 0.8200 IN
  (3)
• 1.6200 IN X 1.6200 IN X 1.6400 IN
  (7)
• 1.6200 IN X 1.6200 IN X 1.3900 IN
  (2)
• 1.5000 IN X 0.7500 IN X 7.2500 IN
  (2)
• 1.5000 IN X 3.7500 IN X 7.5000 IN
  (1)
• 1.2500 IN X 2.0000 IN X 0.8750 IN
  (1)
• 2.0000 IN X 2.0000 IN X 0.9670 IN
  (1)
• 2.5000 IN X 1.2500 IN X 7.2500 IN
  (1)
• 3.0000 IN X 1.2500 IN X 5.3700 IN
  (1)
• 1.6500 IN X 1.6200 IN X 3.5000 IN
  (1)
• 2.6250 IN X 1.6250 IN X 2.6250 IN
  (1)
• 7.2500 IN X 1.6200 IN X 2.6200 IN
  (1)
• 8.0000 IN X 1.6200 IN X 2.6200 IN
  (1)
• 9.0000 IN X 1.6200 IN X 2.6200 IN
  (1)
• 10.0000 IN X 1.6200 IN X 2.6200 IN
  (1)
• 10.8700 IN X 1.6200 IN X 2.6200 IN
  (1)
• 11.6200 IN X 1.6200 IN X 2.6200 IN
  (1)
• 1.6200 IN X 1.6200 IN X 2.4500 IN
  (1)
• 1.6200 IN X 1.6200 IN X 3.2600 IN
  (1)
• 1.8700 IN X 1.6200 IN X 2.0600 IN
  (6)
• 2.2500 IN X 1.6200 IN X 2.2500 IN
  (4)
• 1.8700 IN X 1.6200 IN X 3.9300 IN
  (4)
• 2.0600 IN X 1.8700 IN X 3.5000 IN
  (2)
• 4.8700 IN X 1.6200 IN X 2.0000 IN
  (1)
• 3.7500 IN X 2.0600 IN X 3.5000 IN
  (1)
• 6.7800 IN X 1.6200 IN X 0.6800 IN
  (1)
• 6.7500 IN X 1.6200 IN X 1.1100 IN
  (1)
• 6.6500 IN X 1.6200 IN X 1.5300 IN
  (1)
• 6.5000 IN X 1.6200 IN X 1.9500 IN
  (1)
• 6.0300 IN X 1.6200 IN X 2.7000 IN
  (4)
• 5.3500 IN X 1.6200 IN X 3.3200 IN
  (1)
• 12.0000 IN X 1.6200 IN X 10.1200 IN
  (2)
• 16.0000 IN X 1.6200 IN X 13.3700 IN
  (1)
• 16.6200 IN X 1.6200 IN X 13.3700 IN
  (1)
• 18.0000 IN X 1.6200 IN X 14.4300 IN
  (2)
• 7.0300 IN X 1.6200 IN X 1.6200 IN
  (1)
• 3.5000 IN X 3.5000 IN X 3.9300 IN
  (3)
• 5.3700 IN X 1.6200 IN X 3.9300 IN
  (3)
• 3.8100 IN X 1.6800 IN X 2.0600 IN
  (2)
• 5.6700 IN X 1.6800 IN X 3.9300 IN
  (3)
• 4.0000 IN X 1.6200 IN X 4.0000 IN
  (3)
• 5.0000 IN X 5.0000 IN X 3.5000 IN
  (2)
• 6.0000 IN X 6.0000 IN X 1.6200 IN
  (8)
• 6.0000 IN X 6.0000 IN X 3.5000 IN
  (20)
• 1.5900 IN X 0.7800 IN X 0.6300 IN
  (3)
• 1.5900 IN X 1.5900 IN X 0.6300 IN
  (3)
• 1.5900 IN X 1.5900 IN X 0.2200 IN
  (3)
• 12.5000 IN X 1.6200 IN X 6.0000 IN
  (2)
• 14.5000 IN X 1.6200 IN X 6.0000 IN
  (2)
• 16.5000 IN X 1.6200 IN X 6.0000 IN
  (2)
• 18.5000 IN X 1.6200 IN X 6.0000 IN
  (1)
• 20.5000 IN X 1.6200 IN X 6.0000 IN
  (2)
• 18.0000 IN X 1.6200 IN X 3.5000 IN
  (2)
• 24.0000 IN X 1.6200 IN X 3.5000 IN
  (2)
• 12.0000 IN X 1.6200 IN X 6.2500 IN
  (1)
• 18.0000 IN X 1.6200 IN X 6.2500 IN
  (2)
• 24.0000 IN X 1.6200 IN X 6.2500 IN
  (3)
• 30.0000 IN X 1.6200 IN X 6.2500 IN
  (1)
• 36.0000 IN X 1.6200 IN X 6.2500 IN
  (2)
• 3.0000 IN X 0.3750 IN X 2.3125 IN
  (1)
• 2.5000 IN X 0.5000 IN X 2.3125 IN
  (1)
• 2.5000 IN X 0.4670 IN X 2.3125 IN
  (1)
• 2.5000 IN X 0.4670 IN X 2.4375 IN
  (3)
• 2.5000 IN X 0.4670 IN X 2.5625 IN
  (3)
• 9.0000 IN X 6.0000 IN X 0.2500 IN
  (1)
• 12.0000 IN X 9.0000 IN X 0.2500 IN
  (1)
• 15.0000 IN X 6.0000 IN X 0.2500 IN
  (1)
• 18.0000 IN X 15.0000 IN X 0.2500 IN
  (1)
• 3.2500 IN X 0.6250 IN X 3.5625 IN
  (4)
• 3.2500 IN X 0.6250 IN X 3.7188 IN
  (2)
• 3.3700 IN X 1.6200 IN X 1.7500 IN
  (3)
• 7.5000 IN X 1.6200 IN X 1.8500 IN
  (1)
• 10.3700 IN X 1.6200 IN X 1.8500 IN
  (1)
• 9.1200 IN X 1.6200 IN X 5.3700 IN
  (1)
• 9.1200 IN X 1.6200 IN X 3.5000 IN
  (1)
• 3.2500 IN X 1.6200 IN X 1.6200 IN
  (2)
• 9.1300 IN X 1.6200 IN X 1.6200 IN
  (2)
• 3.5000 IN X 1.6200 IN X 5.3800 IN
  (1)
• 1.6500 IN X 1.6200 IN X 3.9300 IN
  (2)
• 1.6500 IN X 3.5000 IN X 3.9300 IN
  (2)
• 1.8438 IN X 1.6250 IN X 1.8400 IN
  (4)
• 2.0600 IN X 1.6200 IN X 5.3700 IN
  (1)
• 5.0000 IN X 1.8700 IN X 1.6200 IN
  (1)
• 4.0000 IN X 1.8700 IN X 1.6200 IN
  (1)
• 3.0000 IN X 1.6200 IN X 1.8700 IN
  (2)
• 4.0000 IN X 1.6200 IN X 1.8700 IN
  (1)
• 3.7500 IN X 1.6200 IN X 8.0000 IN
  (1)
• 5.0000 IN X 1.6200 IN X 4.3700 IN
  (5)
• 2.6200 IN X 1.6200 IN X 2.0000 IN
  (3)
• 2.6200 IN X 1.6200 IN X 1.6200 IN
  (1)
• 2.0600 IN X 1.6200 IN X 3.7500 IN
  (2)
• 3.3100 IN X 1.6200 IN X 3.3700 IN
  (1)
• 7.6200 IN X 1.6200 IN X 2.3700 IN
  (1)
• 9.6200 IN X 1.6200 IN X 4.3700 IN
  (1)
• 11.6200 IN X 1.6200 IN X 6.3700 IN
  (1)
• X X 2.5940 IN
  (1)
• 1.4380 IN X 1.3750 IN X 1.1200 IN
  (1)
• 1.6200 IN X 1.6200 IN X 3.7700 IN
  (1)
• 1.8700 IN X 1.6300 IN X 1.8700 IN
  (1)
• 1.7800 IN X 3.4375 IN X 1.6563 IN
  (1)
• 4.0000 IN X 1.6200 IN X 3.5000 IN
  (1)
• 9.0000 IN X 1.6200 IN X 4.6200 IN
  (3)
• 12.0000 IN X 1.6200 IN X 4.6200 IN
  (4)
• 14.0000 IN X 1.6200 IN X 4.6200 IN
  (1)
• 6.0000 IN X 1.6200 IN X 4.6200 IN
  (2)
• 0.8100 IN X 1.6200 IN X 1.6200 IN
  (1)
• 0.8100 IN X 1.6200 IN X 0.8100 IN
  (1)
• 18.0000 IN X 1.6200 IN X 1.6200 IN
  (1)
• 5.4300 IN X 1.6200 IN X 1.8700 IN
  (1)
• 1.8700 IN X 1.6200 IN X 3.8700 IN
  (1)
• 1.8700 IN X 1.6200 IN X 5.8700 IN
  (1)
• 1.8700 IN X 1.6200 IN X 7.8700 IN
  (1)
• 1.8700 IN X 1.6200 IN X 9.8700 IN
  (1)
• 0.5000 IN X 2.3750 IN X 2.7500 IN
  (1)
• 0.7500 IN X 2.3750 IN X 2.7500 IN
  (1)
• 1.0000 IN X 2.8750 IN X 3.0000 IN
  (1)
• 1.2500 IN X 2.8750 IN X 3.0000 IN
  (1)
• 1.5000 IN X 3.2500 IN X 3.0000 IN
  (1)
• 2.0000 IN X 3.6875 IN X 3.2500 IN
  (1)
• 2.5000 IN X 4.2500 IN X 3.7500 IN
  (1)
• 3.0000 IN X 4.8750 IN X 4.0000 IN
  (1)
• 4.0000 IN X 6.0000 IN X 4.5000 IN
  (1)
• 5.4300 IN X 1.6200 IN X 3.5000 IN
  (1)
• 2.0000 IN X 1.5000 IN X 2.8750 IN
  (1)
• 5.7500 IN X 1.6200 IN X 3.5000 IN
  (1)
• 2.0000 IN X 1.2500 IN X 2.3750 IN
  (1)
• 1.3900 IN X 0.5000 IN X 0.2890 IN
  (1)
• 3.0000 IN X 2.3750 IN X 3.3750 IN
  (6)
• 3.0000 IN X 1.3750 IN X 1.3750 IN
  (1)
• 3.0000 IN X 1.8750 IN X 1.8750 IN
  (1)
• 3.0000 IN X 2.5000 IN X 2.3750 IN
  (1)
• 1.7500 IN X 1.7500 IN X 1.7500 IN
  (3)
• 2.7500 IN X 1.7500 IN X 1.7500 IN
  (4)
• 5.6200 IN X 1.6200 IN X 0.6200 IN
  (2)
• 1.6200 IN X 0.8100 IN X 0.4600 IN
  (7)
• 1.5000 IN X 1.6200 IN X 1.7500 IN
  (2)
• 3.0000 IN X 1.6250 IN X 3.9300 IN
  (2)
• 1.8700 IN X 1.6200 IN X 6.8700 IN
  (2)
• 1.8700 IN X 1.6200 IN X 4.8700 IN
  (2)
• 3.3750 IN X 1.6563 IN X 2.5000 IN
  (1)
• 5.0000 IN X 1.6563 IN X 2.5000 IN
  (1)
• X X 1.8800 IN
  (1)
• X X 3.5000 IN
  (1)
• X X 4.0600 IN
  (1)
• X X 4.5600 IN
  (1)
• X X 5.0000 IN
  (1)
• X X 6.2500 IN
  (1)
• X X 8.6300 IN
  (1)
• 5.3700 IN X 1.6200 IN X 4.1800 IN
  (4)
• 3.5000 IN X 1.6200 IN X 3.2500 IN
  (1)
• 3.6200 IN X 1.6200 IN X 5.3700 IN
  (2)
• 10.0000 IN X 5.5000 IN X 7.2500 IN
  (2)
• 2.0000 IN X 1.6200 IN X 1.8700 IN
  (2)
• 3.4600 IN X 1.6200 IN X 1.6200 IN
  (2)
• 4.8700 IN X 3.0000 IN X 1.6200 IN
  (1)
• 4.1200 IN X 1.6200 IN X 5.3700 IN
  (2)
• 10.5000 IN X 1.6200 IN X 4.0000 IN
  (1)
• 3.2500 IN X 1.6200 IN X 2.2500 IN
  (1)
• 6.0000 IN X 1.6200 IN X 6.0000 IN
  (1)
• 8.8700 IN X 1.6200 IN X 1.8700 IN
  (1)
• 7.0600 IN X 1.6200 IN X 1.6200 IN
  (1)
• 5.3700 IN X 1.6200 IN X 2.6800 IN
  (1)
• 5.4300 IN X 1.6200 IN X 4.8700 IN
  (1)
• 1.3700 IN X 1.6200 IN X 1.5000 IN
  (1)
• 2.5000 IN X 1.4375 IN X 2.5000 IN
  (1)
• 1.6200 IN X 1.6200 IN X 2.2500 IN
  (1)
• 3.5000 IN X 1.6250 IN X 3.5000 IN
  (3)
• 1.6500 IN X 1.6200 IN X 6.2500 IN
  (1)
• 18.0000 IN X 1.6200 IN X 1.7500 IN
  (2)
• 24.0000 IN X 1.6200 IN X 1.7500 IN
  (1)
• 30.0000 IN X 1.6200 IN X 1.7500 IN
  (1)
• 36.0000 IN X 1.6200 IN X 1.7500 IN
  (1)
• X X 0.2500 IN
  (2)
• X X 0.3125 IN
  (1)
• X X 0.3750 IN
  (5)
• X X 0.6250 IN
  (5)
• 5.6200 IN X 1.6200 IN X 2.5000 IN
  (1)
• 1.8438 IN X 1.6250 IN X 2.0000 IN
  (4)
• 2.0000 IN X 2.0000 IN X 3.0000 IN
  (4)
• 11.0000 IN X 3.1250 IN X 7.0000 IN
  (1)
• 4.5000 IN X 3.0000 IN X 3.2500 IN
  (1)
• 4.0000 IN X 0.3750 IN X 4.0000 IN
  (1)
• 6.0000 IN X 0.3750 IN X 6.0000 IN
  (1)
• X X 8.5000 IN
  (1)
• X X 11.5000 IN
  (1)
• X X 14.5000 IN
  (1)
• 8.0000 IN X 3.0000 IN X 1.6200 IN
  (4)
• 8.0000 IN X 3.0000 IN X 3.5000 IN
  (5)
• 2.3750 IN X 0.3750 IN X 2.3750 IN
  (2)
• 2.3750 IN X 0.5000 IN X 2.3750 IN
  (2)
• 2.2500 IN X 0.6250 IN X 2.3750 IN
  (2)
• 3.2500 IN X 0.7500 IN X 2.3750 IN
  (1)
• 3.2500 IN X 0.8750 IN X 3.0000 IN
  (2)
• 3.2500 IN X 1.6200 IN X 5.3700 IN
  (1)
• 5.3700 IN X 1.6200 IN X 1.8700 IN
  (2)
• X X 8.7500 IN
  (1)
• 2.8125 IN X 2.8125 IN X 2.8125 IN
  (1)
• 1.8700 IN X 3.9300 IN X 5.3700 IN
  (1)
• X X 14.7500 IN
  (1)
• X X 7.3750 IN
  (1)
• X X 11.3750 IN
  (1)
• 4.0000 IN X 3.0000 IN X 5.0000 IN
  (2)
• 6.0000 IN X 3.0000 IN X 5.0000 IN
  (2)
• 9.0000 IN X 3.0000 IN X 5.0000 IN
  (2)
• 4.5000 IN X 1.6200 IN X 3.2500 IN
  (2)
• 4.5000 IN X 1.6200 IN X 2.4300 IN
  (1)
• 4.5000 IN X 1.6200 IN X 1.6200 IN
  (3)
• 4.5000 IN X 1.6200 IN X 1.6300 IN
  (1)
• 4.5000 IN X 1.6200 IN X 0.8100 IN
  (1)
• 2.3100 IN X 1.6200 IN X 3.2500 IN
  (1)
• 2.3100 IN X 1.6200 IN X 1.6200 IN
  (1)
• 4.0000 IN X 1.7800 IN X 4.0000 IN
  (7)
• X X 17.7500 IN
  (1)
• 12.0000 IN X 1.6200 IN X 8.7500 IN
  (1)
• 18.0000 IN X 1.6200 IN X 8.7500 IN
  (1)
• 24.0000 IN X 1.6200 IN X 8.7500 IN
  (1)
• 30.0000 IN X 1.6200 IN X 11.2500 IN
  (1)
• 36.0000 IN X 1.6200 IN X 11.2500 IN
  (1)
• 42.0000 IN X 1.6200 IN X 16.0000 IN
  (1)
• 48.0000 IN X 1.6200 IN X 16.0000 IN
  (1)
• 9.1800 IN X 1.6200 IN X 3.8700 IN
  (2)
• 0.4900 IN X 1.2500 IN X 1.2200 IN
  (2)
• 0.6100 IN X 1.2500 IN X 1.3600 IN
  (2)
• 0.7400 IN X 1.2500 IN X 1.4900 IN
  (2)
• 0.8600 IN X 1.2500 IN X 1.6200 IN
  (2)
• 1.1500 IN X 1.2500 IN X 1.8700 IN
  (2)
• 1.2700 IN X 1.2500 IN X 2.0000 IN
  (2)
• 2.2000 IN X 1.2500 IN X 3.0000 IN
  (2)
• 3.1760 IN X 1.6250 IN X 3.1760 IN
  (1)
• 3.8570 IN X 1.6250 IN X 1.5960 IN
  (1)
• 4.6540 IN X 1.6250 IN X 1.9060 IN
  (1)
• 7.5220 IN X 1.6250 IN X 3.0310 IN
  (1)
• 10.6950 IN X 1.6250 IN X 4.2810 IN
  (1)
• 1.9370 IN X 1.2500 IN X 0.0635 IN
  (2)
• 2.1560 IN X 1.2500 IN X 0.0635 IN
  (1)
• 2.1560 IN X 1.2500 IN X 0.0625 IN
  (1)
• 2.3750 IN X 1.2500 IN X 0.0677 IN
  (2)
• 2.6250 IN X 1.2500 IN X 0.0677 IN
  (2)
• 3.0310 IN X 1.2500 IN X 0.0677 IN
  (2)
• 3.3750 IN X 1.2500 IN X 0.0966 IN
  (2)
• 4.0000 IN X 1.2500 IN X 0.0966 IN
  (2)
• 2.0550 IN X 1.2500 IN X 0.0625 IN
  (2)
• 2.2220 IN X 1.2500 IN X 0.0625 IN
  (2)
• 2.5010 IN X 1.2500 IN X 0.0625 IN
  (2)
• 2.7540 IN X 1.2500 IN X 0.0705 IN
  (2)
• 3.1890 IN X 1.2500 IN X 0.0705 IN
  (2)
• 3.5730 IN X 1.2500 IN X 0.0994 IN
  (2)
• 4.1640 IN X 1.2500 IN X 0.0994 IN
  (2)
• 2.3960 IN X 1.2500 IN X 0.0625 IN
  (2)
• 2.6080 IN X 1.2500 IN X 0.0705 IN
  (2)
• 2.9510 IN X 1.2500 IN X 0.0705 IN
  (2)
• 3.3510 IN X 1.2500 IN X 0.0705 IN
  (2)
• 3.7800 IN X 1.2500 IN X 0.0994 IN
  (2)
• 4.3940 IN X 1.2500 IN X 0.0994 IN
  (2)
• 5.0390 IN X 1.2500 IN X 0.0994 IN
  (2)
• 5.8430 IN X 1.2500 IN X 0.0994 IN
  (2)
• 6.1410 IN X 1.2500 IN X 0.0994 IN
  (2)
• 6.7030 IN X 1.2500 IN X 0.0994 IN
  (2)
• 7.2970 IN X 1.2500 IN X 0.1200 IN
  (2)
• 7.9690 IN X 1.2500 IN X 0.1200 IN
  (2)
• 9.8750 IN X 1.2500 IN X 0.1200 IN
  (2)
• 11.1880 IN X 1.2500 IN X 0.1200 IN
  (2)
• 12.3750 IN X 1.2500 IN X 0.1200 IN
  (2)
• 15.2570 IN X 1.2500 IN X 0.1200 IN
  (1)
• 17.8270 IN X 1.2500 IN X 0.1200 IN
  (1)
• 1.6170 IN X 1.2500 IN X 0.0625 IN
  (2)
• 1.7890 IN X 1.2500 IN X 0.0625 IN
  (2)
• 0.5000 IN X 1.2500 IN X 0.0625 IN
  (2)
• 0.5000 IN X 1.2500 IN X 0.0600 IN
  (2)
• 2.1170 IN X 1.2500 IN X 0.0625 IN
  (2)
• 2.1170 IN X 1.2500 IN X 0.0600 IN
  (2)
• 2.2790 IN X 1.2500 IN X 0.0625 IN
  (2)
• 2.7050 IN X 1.2500 IN X 0.0705 IN
  (2)
• 2.7050 IN X 1.2500 IN X 0.0677 IN
  (2)
• 2.8660 IN X 1.2500 IN X 0.0705 IN
  (1)
• 4.0720 IN X 1.2500 IN X 0.0994 IN
  (2)
• 4.0720 IN X 1.2500 IN X 0.0966 IN
  (2)
• 4.2330 IN X 1.2500 IN X 0.0994 IN
  (2)
• 4.5550 IN X 1.2500 IN X 0.0994 IN
  (2)
• 4.7160 IN X 1.2500 IN X 0.0994 IN
  (2)
• 4.7160 IN X 1.2500 IN X 0.0966 IN
  (1)
• 4.7160 IN X 1.2500 IN X 0.0996 IN
  (1)
• 4.8770 IN X 1.2500 IN X 0.0994 IN
  (1)
• 5.3600 IN X 1.2500 IN X 0.0994 IN
  (1)
• 5.5210 IN X 1.2500 IN X 0.0994 IN
  (1)
• 5.6830 IN X 1.2500 IN X 0.0994 IN
  (2)
• 5.7030 IN X 1.2500 IN X 0.0994 IN
  (2)
• 5.8440 IN X 1.2500 IN X 0.0994 IN
  (1)
• 5.9840 IN X 1.2500 IN X 0.0994 IN
  (1)
• 6.2810 IN X 1.2500 IN X 0.0994 IN
  (1)
• 6.2810 IN X 1.2500 IN X 0.0966 IN
  (1)
• 6.4220 IN X 1.2500 IN X 0.0994 IN
  (1)
• 6.4060 IN X 1.2500 IN X 0.0994 IN
  (1)
• 6.8590 IN X 1.2500 IN X 0.1200 IN
  (1)
• 7.0000 IN X 1.2500 IN X 0.1200 IN
  (1)
• 7.1410 IN X 1.2500 IN X 0.1200 IN
  (1)
• 7.9380 IN X 1.2500 IN X 0.1200 IN
  (1)
• 7.5780 IN X 1.2500 IN X 0.1200 IN
  (1)
• 8.1870 IN X 1.2500 IN X 0.1200 IN
  (1)
• 8.5510 IN X 1.2500 IN X 0.1200 IN
  (1)
• 8.6620 IN X 1.2500 IN X 0.1200 IN
  (1)
• 8.9040 IN X 1.2500 IN X 0.1200 IN
  (1)
• 9.3150 IN X 1.2500 IN X 0.1200 IN
  (1)
• 9.4750 IN X 1.2500 IN X 0.1200 IN
  (1)
• 9.6360 IN X 1.2500 IN X 0.1200 IN
  (1)
• 9.7970 IN X 1.2500 IN X 0.1200 IN
  (1)
• 10.1180 IN X 1.2500 IN X 0.1200 IN
  (1)
• 11.0810 IN X 1.2500 IN X 0.1200 IN
  (1)
• 11.8840 IN X 1.2500 IN X 0.1200 IN
  (1)
• 1.2500 IN X 1.6200 IN X 0.8100 IN
  (5)
• 0.8700 IN X 1.6200 IN X 0.0620 IN
  (1)
• 0.3100 IN X 1.6200 IN X 0.0940 IN
  (1)
• 0.3700 IN X 1.6200 IN X 0.1250 IN
  (1)
• 0.5000 IN X 1.6200 IN X 0.1880 IN
  (1)
• 0.7500 IN X 1.6200 IN X 0.3120 IN
  (1)
• 2.8100 IN X 1.6200 IN X 0.5000 IN
  (1)
• 3.0000 IN X 1.6200 IN X 0.7500 IN
  (1)
• 3.5300 IN X 1.6200 IN X 1.0000 IN
  (1)
• 3.7500 IN X 1.6200 IN X 1.2500 IN
  (1)
• 4.0600 IN X 1.6200 IN X 1.5000 IN
  (1)
• 5.6500 IN X 1.6200 IN X 2.0000 IN
  (1)
• 6.1500 IN X 1.6200 IN X 2.5000 IN
  (1)
• 3.0000 IN X 1.6200 IN X 3.0000 IN
  (1)
• 7.2800 IN X 1.6200 IN X 3.5000 IN
  (1)
• 7.7800 IN X 1.6200 IN X 4.0000 IN
  (1)
• 8.8700 IN X 1.6200 IN X 5.0000 IN
  (1)
• 9.9300 IN X 1.6200 IN X 6.0000 IN
  (1)
• 11.9600 IN X 1.6200 IN X 8.0000 IN
  (1)
• 3.2500 IN X 2.0000 IN X 1.5630 IN
  (1)
• 5.1660 IN X 1.6250 IN X 2.6250 IN
  (1)
• 3.0000 IN X 2.2500 IN X 1.3700 IN
  (1)
• 4.0000 IN X 2.2500 IN X 2.6200 IN
  (1)
• X X 72.0000 IN
  (8)
• X X 120.0000 IN
  (15)
• X X 144.0000 IN
  (9)
• 2.0000 IN X 1.1250 IN X 2.2500 IN
  (1)
• 2.1875 IN X 1.2500 IN X 2.3125 IN
  (1)
• 2.5000 IN X 1.3750 IN X 2.6250 IN
  (1)
• 2.5000 IN X 1.4375 IN X 2.6875 IN
  (1)
• 2.0000 IN X 0.8750 IN X 1.6250 IN
  (1)
• 2.1875 IN X 1.1875 IN X 1.8125 IN
  (1)
• 1.7500 IN X 0.3750 IN X 1.7500 IN
  (2)
• 1.7500 IN X 0.5000 IN X 1.7500 IN
  (1)
• 1.7500 IN X 0.7500 IN X 1.7500 IN
  (1)
• 1.8750 IN X 0.6250 IN X 1.7500 IN
  (1)
• 2.0000 IN X 0.7500 IN X 2.0000 IN
  (1)
• 1.1875 IN X 1.8125 IN X 2.6250 IN
  (1)
• 1.8750 IN X 1.8125 IN X 2.6250 IN
  (1)
• 1.3100 IN X 1.8125 IN X 2.6250 IN
  (1)
• 8.0000 IN X 1.2500 IN X 0.7500 IN
  (1)
• 10.0000 IN X 1.2500 IN X 0.7500 IN
  (1)
• 12.0000 IN X 1.2500 IN X 0.7500 IN
  (1)
• 9.0000 IN X 1.0000 IN X 0.5000 IN
  (1)
• 9.2500 IN X 1.0000 IN X 0.7500 IN
  (1)
• 9.5600 IN X 1.0000 IN X 1.0000 IN
  (2)
• 10.0000 IN X 1.0000 IN X 1.2500 IN
  (1)
• 10.2500 IN X 1.0000 IN X 1.5000 IN
  (2)
• 10.7500 IN X 1.0000 IN X 2.0000 IN
  (2)
• 11.2500 IN X 1.0000 IN X 2.5000 IN
  (2)
• 11.9300 IN X 1.0000 IN X 3.0000 IN
  (2)
• 12.3700 IN X 1.0000 IN X 3.5000 IN
  (1)
• 12.8700 IN X 1.0000 IN X 4.0000 IN
  (1)
• 14.0000 IN X 1.5000 IN X 5.0000 IN
  (1)
• 14.7500 IN X 1.5000 IN X 9.4980 IN
  (1)
• 17.7500 IN X 1.5000 IN X 8.0000 IN
  (1)
• 19.4300 IN X 2.0000 IN X 10.0000 IN
  (1)
• 21.6800 IN X 2.0000 IN X 12.0000 IN
  (1)
• 23.5600 IN X 2.0000 IN X 14.0000 IN
  (1)
• 26.3700 IN X 2.5000 IN X 16.0000 IN
  (1)
• 28.8700 IN X 2.5000 IN X 18.0000 IN
  (1)
• 8.7500 IN X 1.0000 IN X 0.5000 IN
  (1)
• 9.0600 IN X 1.0000 IN X 0.7500 IN
  (1)
• 9.6200 IN X 1.0000 IN X 1.2500 IN
  (1)
• 12.5000 IN X 1.0000 IN X 4.0000 IN
  (1)
• X X 15.1250 IN
  (1)
• X X 0.0500 IN
  (7)
• X X 0.0650 IN
  (3)
• X X 0.0900 IN
  (1)
• X X 0.0450 IN
  (1)
• X X 0.1180 IN
  (1)
• 1.1800 IN X 0.8100 IN X 0.0480 IN
  (1)
• 1.3200 IN X 0.8100 IN X 0.0480 IN
  (1)
• 1.4380 IN X 0.8100 IN X 0.0620 IN
  (1)
• 1.8750 IN X 0.8100 IN X 0.0620 IN
  (1)
• 2.1250 IN X 0.8100 IN X 0.0620 IN
  (1)
• 6.2810 IN X 4.3130 IN X 1.2500 IN
  (1)
• 7.5000 IN X 5.8130 IN X 1.2500 IN
  (1)
• 144.0000 IN X 1.6000 IN X 1.6000 IN
  (1)
• 120.0000 IN X 2.3000 IN X 1.6000 IN
  (2)
• 144.0000 IN X 2.3000 IN X 1.6000 IN
  (2)
• 2.2500 IN X 1.5781 IN X 1.5781 IN
  (2)
• 1.6200 IN X 1.6200 IN X 2.3100 IN
  (1)
• 3.5000 IN X 1.6200 IN X 4.1250 IN
  (1)
• 1.2500 IN X 1.6200 IN X 4.1250 IN
  (1)
• 1.0300 IN X 1.0300 IN X 0.1040 IN
  (1)
• 3.0000 IN X 1.3700 IN X 7.0000 IN
  (1)
• 4.0000 IN X 4.5000 IN X 5.2500 IN
  (1)
• 2.5000 IN X 0.4200 IN X 4.2500 IN
  (1)
• 4.2500 IN X 0.4200 IN X 4.2500 IN
  (1)
• 0.7500 IN X 1.6245 IN X 1.6245 IN
  (4)
• 16.0000 IN X 7.1250 IN X 7.7800 IN
  (2)
• 18.0000 IN X 7.1250 IN X 7.7800 IN
  (1)
• 4.7540 IN X 0.9000 IN X 3.9580 IN
  (1)
• 8.0000 IN X 4.3750 IN X 9.6200 IN
  (1)
• 5.8100 IN X 1.8700 IN X 5.3700 IN
  (2)
• 14.0000 IN X 7.1250 IN X 14.0000 IN
  (1)
• 12.0000 IN X 7.1250 IN X 7.7800 IN
  (1)
• 0.7500 IN X 0.8325 IN X 0.8325 IN
  (2)
• 0.5000 IN X 0.5000 IN X 0.5000 IN
  (2)
• 3.2500 IN X 1.6250 IN X 0.5000 IN
  (1)
• 3.2500 IN X 1.6250 IN X 0.6200 IN
  (1)
• 3.2500 IN X 1.6250 IN X 0.7500 IN
  (1)
• 2.3800 IN X 1.6200 IN X 4.3100 IN
  (1)
• 0.7500 IN X 1.0200 IN X 1.0200 IN
  (1)
• 1.1000 IN X 1.1000 IN X 1.1000 IN
  (1)
• 0.8190 IN X 1.1480 IN X 2.6470 IN
  (1)
• 3.3510 IN X 1.2500 IN X 0.0677 IN
  (6)
• 2.3960 IN X 1.2500 IN X 0.0600 IN
  (5)
• X X 500.0000 IN
  (3)
• X X 2.6250 IN
  (3)
• X X 4.0000 IN
  (1)
• X X 2.1250 IN
  (2)
• X X 3.1250 IN
  (2)
• X X 6.0000 IN
  (2)
• X X 1.6250 IN
  (4)
• X X 4.1250 IN
  (1)
• 9.5625 IN X 6.0000 IN X 11.5313 IN
  (1)
• 8.0625 IN X 5.0000 IN X 9.7500 IN
  (1)
• 6.7500 IN X 4.0000 IN X 8.1250 IN
  (1)
• 0.5000 IN X 0.5000 IN X 0.4375 IN
  (1)
• 0.6800 IN X 0.6800 IN X 0.0940 IN
  (1)
• 0.7340 IN X 0.7340 IN X 0.0650 IN
  (1)
• 0.4870 IN X 0.4870 IN X 0.0620 IN
  (1)
• 0.8750 IN X 0.8750 IN X 0.0830 IN
  (1)
• 1.5000 IN X 0.3750 IN X 0.3750 IN
  (2)
• 1.0000 IN X 0.5000 IN X 0.5000 IN
  (1)
• 0.5620 IN X 0.5620 IN X 0.0640 IN
  (2)
• 2.0000 IN X 0.3750 IN X 0.3750 IN
  (2)
• 3.0000 IN X 0.3750 IN X 0.3750 IN
  (1)
• 3.0000 IN X 0.5000 IN X 0.5000 IN
  (1)
• 1.2500 IN X 0.6250 IN X 0.6250 IN
  (1)
• 2.5000 IN X 0.6250 IN X 0.6250 IN
  (1)
• 3.5000 IN X 0.6250 IN X 0.6250 IN
  (1)
• 3.7500 IN X 0.6250 IN X 0.6250 IN
  (1)
• 4.0000 IN X 0.6250 IN X 0.6250 IN
  (1)
• 1.0000 IN X 1.0000 IN X 0.0830 IN
  (1)
• 5.7030 IN X 1.2500 IN X 0.1015 IN
  (1)
• 1.7500 IN X 1.3100 IN X 0.8500 IN
  (2)
• 1.2680 IN X 0.6490 IN X 0.3750 IN
  (2)
• 1.5180 IN X 0.6490 IN X 0.3750 IN
  (1)
• 1.3640 IN X 0.8660 IN X 0.5000 IN
  (2)
• 1.6140 IN X 0.8660 IN X 0.5000 IN
  (2)
• 1.8640 IN X 0.8660 IN X 0.5000 IN
  (2)
• 1.2390 IN X 0.8660 IN X 0.5000 IN
  (1)
• 11.0000 IN X 2.3750 IN X 2.7500 IN
  (1)
• 11.0000 IN X 2.8750 IN X 3.0000 IN
  (1)
• 10.0000 IN X 3.6875 IN X 3.2500 IN
  (1)
• 11.0000 IN X 3.2500 IN X 3.0000 IN
  (1)
• 2.6080 IN X 1.2500 IN X 0.0740 IN
  (4)
• 2.9510 IN X 1.2500 IN X 0.0740 IN
  (4)
• 3.7800 IN X 1.2500 IN X 0.1040 IN
  (3)
• 4.3940 IN X 1.2500 IN X 0.1040 IN
  (4)
• 2.6080 IN X 1.2500 IN X 0.0677 IN
  (4)
• 2.9510 IN X 1.2500 IN X 0.0677 IN
  (3)
• 3.7800 IN X 1.2500 IN X 0.0966 IN
  (3)
• 4.3940 IN X 1.2500 IN X 0.0966 IN
  (4)
• 5.0390 IN X 1.2500 IN X 0.0966 IN
  (2)
• 5.8430 IN X 1.2500 IN X 0.0966 IN
  (4)
• 6.7030 IN X 1.2500 IN X 0.0966 IN
  (3)
• 2.2220 IN X 1.2500 IN X 0.0600 IN
  (1)
• 2.5010 IN X 1.2500 IN X 0.0600 IN
  (3)
• 2.7540 IN X 1.2500 IN X 0.0677 IN
  (2)
• 3.1890 IN X 1.2500 IN X 0.0677 IN
  (1)
• 3.5730 IN X 1.2500 IN X 0.0966 IN
  (2)
• 4.1640 IN X 1.2500 IN X 0.0966 IN
  (1)
• 5.8430 IN X 1.2500 IN X 0.1040 IN
  (3)
• 6.7030 IN X 1.2500 IN X 0.1040 IN
  (3)
• 1.1880 IN X 0.5060 IN X 0.2500 IN
  (2)
• 1.3750 IN X 1.3100 IN X 0.8500 IN
  (2)
• 1.3900 IN X 1.1100 IN X 1.3900 IN
  (1)
• 0.2500 IN X 1.7500 IN X 3.4380 IN
  (2)
• 2.3960 IN X 1.2500 IN X 0.0630 IN
  (2)
• 2.3960 IN X 1.2500 IN X 0.0590 IN
  (3)
• 2.6080 IN X 1.2500 IN X 0.0810 IN
  (2)
• 2.9510 IN X 1.2500 IN X 0.0810 IN
  (2)
• 3.3510 IN X 1.2500 IN X 0.0810 IN
  (1)
• 3.3510 IN X 1.2500 IN X 0.0740 IN
  (3)
• 3.7800 IN X 1.2500 IN X 0.1015 IN
  (2)
• 4.3940 IN X 1.2500 IN X 0.1015 IN
  (2)
• 5.0390 IN X 1.2500 IN X 0.1015 IN
  (1)
• 5.0390 IN X 1.2500 IN X 0.1040 IN
  (3)
• 5.8430 IN X 1.2500 IN X 0.1015 IN
  (2)
• 6.1410 IN X 1.2500 IN X 0.1015 IN
  (1)
• 6.1410 IN X 1.2500 IN X 0.0966 IN
  (2)
• 6.1410 IN X 1.2500 IN X 0.1040 IN
  (2)
• 6.7030 IN X 1.2500 IN X 0.1015 IN
  (1)
• 7.9690 IN X 1.2500 IN X 0.1280 IN
  (1)
• 7.9690 IN X 1.2500 IN X 0.0966 IN
  (1)
• 7.9690 IN X 1.2500 IN X 0.1040 IN
  (1)
• 9.8750 IN X 1.2500 IN X 0.1040 IN
  (2)
• 9.8750 IN X 1.2500 IN X 0.1280 IN
  (1)
• 9.8750 IN X 1.2500 IN X 0.0966 IN
  (1)
• 2.2220 IN X 1.2500 IN X 0.0590 IN
  (1)
• 2.5010 IN X 1.2500 IN X 0.0590 IN
  (1)
• 2.7540 IN X 1.2500 IN X 0.0810 IN
  (1)
• 2.7540 IN X 1.2500 IN X 0.0740 IN
  (1)
• 12.3750 IN X 1.2500 IN X 0.1040 IN
  (1)
• 2.7050 IN X 1.2500 IN X 0.0740 IN
  (1)
• 1.6170 IN X 1.2500 IN X 0.0590 IN
  (1)
• 1.7890 IN X 1.2500 IN X 0.0590 IN
  (1)
• 0.5000 IN X 1.2500 IN X 0.0590 IN
  (1)
• 2.2790 IN X 1.2500 IN X 0.0590 IN
  (1)
• 4.5550 IN X 1.2500 IN X 0.1040 IN
  (1)
• 5.3600 IN X 1.2500 IN X 0.1040 IN
  (1)
• 1.3100 IN X 0.7500 IN X 0.2500 IN
  (1)
• 0.7210 IN X 0.5250 IN X 0.4250 IN
  (1)
• 1.7680 IN X 0.6490 IN X 0.5620 IN
  (1)
• 15.2570 IN X 1.2500 IN X 0.1190 IN
  (1)
• 5.7030 IN X 1.2500 IN X 0.1040 IN
  (1)
• 3.0000 IN X 3.0000 IN X 0.3750 IN
  (1)
• 4.0000 IN X 4.0000 IN X 0.7500 IN
  (1)
• 18.0000 IN X 18.0000 IN X 0.3750 IN
  (1)
• 4.0000 IN X 4.0000 IN X 1.0000 IN
  (1)
• X X 12.0000 IN
  (1)
• 4.0000 IN X 36.0000 IN X 1.0000 IN
  (1)
• 6.0000 IN X 6.0000 IN X 1.0000 IN
  (1)
• 2.0000 IN X 2.0000 IN X 1.5000 IN
  (1)
• 18.0000 IN X 18.0000 IN X 1.0000 IN
  (1)
• 4.0000 IN X 4.0000 IN X 1.5000 IN
  (1)
• 6.0000 IN X 6.0000 IN X 0.3750 IN
  (1)
• 3.0000 IN X 36.0000 IN X 1.0000 IN
  (1)
• 2.0000 IN X 2.0000 IN X 0.3750 IN
  (1)
• 18.0000 IN X 18.0000 IN X 0.7500 IN
  (1)
• 8.0000 IN X 8.0000 IN X 1.5000 IN
  (1)
• 3.0000 IN X 3.0000 IN X 1.0000 IN
  (1)
• 2.0000 IN X 2.0000 IN X 1.0000 IN
  (1)
• 3.0000 IN X 3.0000 IN X 1.5000 IN
  (1)
• 5.0000 IN X 5.0000 IN X 1.0000 IN
  (1)
• 6.0000 IN X 6.0000 IN X 1.5000 IN
  (1)
• 4.0000 IN X 4.0000 IN X 0.3750 IN
  (1)
• 1.0000 IN X 1.2500 IN X 2.1800 IN
  (1)
• 9.1560 IN X 1.5000 IN X 0.2500 IN
  (1)
• 9.3650 IN X 6.4000 IN X 1.1060 IN
  (1)
• X X 5.9375 IN
  (1)
• 24.0000 IN X 1.6200 IN X 18.6800 IN
  (1)
• 79.6250 IN X 1.7500 IN X 84.0000 IN
  (1)
• 0.3750 IN X 1.5000 IN X 8.0000 IN
  (1)
• 30.0000 IN X 1.6200 IN X 4.6200 IN
  (1)
• 36.0000 IN X 1.6200 IN X 4.6200 IN
  (1)
• 1.7500 IN X 0.7500 IN X 0.8500 IN
  (1)
• 0.0010 IN X 0.0010 IN X 1.5000 IN
  (1)
• 8.7500 IN X 4.0000 IN X 6.0000 IN
  (1)
• 10.3750 IN X 5.9375 IN X 10.3750 IN
  (1)
• 6.8750 IN X 2.1250 IN X 2.1250 IN
  (1)
• 2.7500 IN X 1.8750 IN X 1.7500 IN
  (1)
• 28.8750 IN X 28.8750 IN X 24.2500 IN
  (1)
• 8.8750 IN X 8.0000 IN X 14.4688 IN
  (1)
• 7.2500 IN X 24.6250 IN X 7.2500 IN
  (1)
• 0.3750 IN X 2.8750 IN X 0.5000 IN
  (1)

Enclosure

• Zinc
  (12)
• Cast Aluminum
  (2)
• Plastic
  (5)
• Aluminum
  (12)
• Plated Steel
  (1)
• Porcelain, Steel
  (1)
• NEMA 4
  (5)
• NEMA FB1
  (10)
• NEMA 3R
  (3)
• NEMA 4X
  (2)
• NEMA 4X, IP68
  (4)
• NEMA 2, 3, 3R, 4, 4X, 5, 12, 13
  (9)

EU RoHS Indicator

• Contact Manufacturer
  (16)

FEATURES - Bullets

• Malleable iron and steel construction for added strength;Available in 3/8 in. to 1 in. trade sizes;Dual saddle clamp ensures proper conduit and cable connection for raceway;Zinc plated for corrosion resistant installation;Tri-head screw/clamp design - connectors can be installed by using a slotted, Phillips or Robertson head screwdriver;Insulated throats on all DOUBLE BITE connectors provide maximum wire protection;Additional sizes available
  (4)
• All steel construction ensures mechanical protection for raceways;Available in 3/8 in. to 4 in. trade sizes;Dual saddle clamp ensures proper conduit and cable connection for raceway;Zinc plated for corrosion resistant installation;Tri-head screw/clamp design - connectors can be installed by using a slotted, Phillips or Robertson head screwdriver;Insulated throats on all DOUBLE BITE connectors provide maximum wire protection;Additional sizes available
  (11)
• Rugged metallic construction insures mechanical protection;Couplings are pre-assembled with tri-head screws
  (2)
• RACO three-piece couplings provide concrete-tight connections;All components are zinc electro plated for corrosion protection;Reduces installation time;Eliminates field threading;Lighter than the traditional malleable iron 3-piece coupling;Compact size makes installation easier where space is limited;No need to disassemble the compression nut and ring
  (3)
• RACO three-piece couplings provide concrete-tight connections;All components are zinc electro plated for corrosion protection;Eliminates field threading;Lighter than the traditional malleable iron 3-piece coupling;Compact size makes installation easier where space is limited;No need to disassemble the compression nut and ring
  (1)
• All steel construction ensures mechanical protection for raceways;Available in 3/8 in. to 4 in. trade sizes;Dual saddle clamp ensures proper conduit and cable connection for raceway;Zinc plated for corrosion resistant installation;Tri-head screw/clamp design - connectors can be installed by using a slotted, Phillips or Robertson head screwdriver;UnInsulated;Additional sizes available
  (1)

Finish

• Silver
  (73)
• Gray
  (21)
• Black
  (13)
• Grey
  (2)
• White
  (2)
• Plated Steel
  (1)
• Aluminum
  (11)
• Zinc Electroplated
  (173)
• No Finish
  (47)
• Ball burnish
  (42)
• Zinc Plated
  (113)
• Natural
  (19)
• Galvanized
  (4)
• Enamel
  (11)
• Hot Dip Galvanized
  (51)
• Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat)
  (114)
• Epoxy Powder Coat
  (42)
• Zinc Electroplate
  (32)
• Natural Stainless Steel
  (6)
• Natural Aluminum
  (2)
• Nickel Plated
  (4)
• Hot Dip Galvanized, Cover Screws: Zinc Electroplated
  (1)
• Zinc Electroplated Body And Compression Washer
  (3)
• Hot Dip Or Mechanically Galvanized
  (7)

Fitting Type

• Conduit Body Covers
  (7)
• Set Screw Type
  (4)
• Connectors
  (16)

Flexibility

• Rigid And IMC
  (36)

FV_BuyAmericanCompliant

• Contact Manufacturer
  (2)

FV_Certified Listed

• UL Listed;CSA Certified
  (2)
• UL Listed
  (4)

FV_Fitting Type

• Connectors
  (15)

FV_Product Family

• Flexible Metal
  (15)
• Rigid/IMC
  (4)

Height

• 2-13/16 IN
  (1)
• 3-1/4 IN
  (1)
• 3-9/16 IN
  (1)
• 6-15/16 IN
  (1)
• 6-9/16 IN
  (1)
• 8-1/16 IN
  (1)
• 8-5/16 IN
  (1)
• 1.66 IN
  (7)
• 7.5 IN
  (1)
• 4.38 IN
  (5)
• 4.22 IN
  (5)
• 3.75 IN
  (6)
• 2.94 IN
  (5)
• 2.22 IN
  (6)
• 4.31 IN
  (5)
• 2 IN
  (1)
• 8.5 IN
  (1)
• 2.66 IN
  (6)
• 3.19 IN
  (6)
• 6.25 IN
  (1)
• 5 IN
  (3)
• 4.44 IN
  (4)
• 4.94 IN
  (3)
• 1.84 IN
  (6)
• 2.97 IN
  (1)

Hub Size

• 1 IN
  (1)
• 1-1/4 IN
  (1)
• 1-1/2 IN
  (1)
• 2 IN
  (1)
• 2-1/2 IN
  (1)
• 3 IN
  (1)
• 4 IN
  (1)

Inside Diameter

• 0.63 IN
  (1)
• 0.88 IN
  (1)
• 0.95 IN
  (1)
• 1.32 IN
  (1)
• 1.64 IN
  (1)
• 2.12 IN
  (1)
• 2.58 IN
  (1)
• 3.12 IN
  (1)
• 3.62 IN
  (1)
• 4.1 IN
  (1)
• 5.11 IN
  (1)
• 6.12 IN
  (1)
• 8.12 IN
  (1)

Insulated

• Yes
  (187)

Insulation

• Insulated Throat
  (9)
• Yes
  (2)

Insulation Class

• 150 DEG C
  (9)
• Insulated throat rated up to 105 degree C
  (9)
• Insulated Throat
  (3)

Insulation Type

• Insulated
  (15)
• UnInsulated
  (1)

Length

• 0.57 IN
  (2)
• 0.63 IN
  (2)
• 0.76 IN
  (2)
• 0.94 IN
  (2)
• 1.13 IN
  (2)
• 1.32 IN
  (2)
• 1.51 IN
  (2)
• 1.57 IN
  (2)
• 1.63 IN
  (3)
• 1.69 IN
  (2)
• 1-3/4 IN
  (1)
• 1-7/8 IN
  (2)
• 2-1/4 IN
  (2)
• 2-3/4 IN
  (2)
• 3-1/4 IN
  (2)
• 3-3/4 IN
  (2)
• 4-5/8 IN
  (2)
• 6-1/2 IN
  (1)
• 2-3/32 IN
  (1)
• 2-3/8 IN
  (1)
• 2-13/16 IN
  (1)
• 3-5/16 IN
  (1)
• 2-11/16 IN
  (1)
• 3-1/8 IN
  (1)
• 3-9/16 IN
  (1)
• 5-3/4 IN
  (1)
• 6-5/8 IN
  (1)
• 8 IN
  (3)
• 1 IN
  (3)
• 1.2 IN
  (1)
• 1.24 IN
  (1)
• 1.36 IN
  (1)
• 1.55 IN
  (1)
• 1.89 IN
  (1)
• 1.93 IN
  (1)
• 2.11 IN
  (1)
• 2.18 IN
  (1)
• 2.39 IN
  (2)
• 2.57 IN
  (1)
• 1.33 IN
  (2)
• 1.44 IN
  (1)
• 1.74 IN
  (1)
• 1.83 IN
  (1)
• 2.03 IN
  (1)
• 2.14 IN
  (1)
• 2.83 IN
  (1)
• 3.05 IN
  (1)
• 3.21 IN
  (1)
• 3.33 IN
  (1)
• 3.58 IN
  (1)
• 4.34 IN
  (1)
• 1.41 IN
  (1)
• 1.5 IN
  (1)
• 1.75 IN
  (1)
• 1.97 IN
  (1)
• 2.15 IN
  (1)
• 2.16 IN
  (1)
• 2.99 IN
  (1)
• 3.12 IN
  (1)
• 3.1 IN
  (1)
• 3.83 IN
  (1)
• 4.43 IN
  (1)
• 1.02 IN
  (1)
• 1.18 IN
  (1)
• 1.9 IN
  (2)
• 1.37 IN
  (1)
• 2.01 IN
  (1)
• 1.6 IN
  (1)
• 2.24 IN
  (1)
• 2.25 IN
  (1)
• 2.6 IN
  (2)
• 0.85 IN
  (1)
• 1.06 IN
  (1)
• 1.68 IN
  (1)
• 1.92 IN
  (1)
• 2.89 IN
  (1)
• 3.52 IN
  (1)
• 4.52 IN
  (1)
• 5.59 IN
  (1)
• 6.69 IN
  (1)
• 4.02 IN
  (1)
• 8.64 IN
  (1)
• 9.63
  (2)
• 9.5
  (2)
• 8.63
  (2)
• 3.38
  (2)
• 7.75
  (2)
• 9
  (2)
• 3.94
  (2)
• 5.69
  (2)
• 4.75
  (4)
• 6.56
  (4)
• 24 IN
  (4)
• 6 IN
  (1)
• 7.1 IN
  (1)
• 9.38
  (1)
• 3.69
  (1)
• 9.25
  (1)
• 6.96 IN
  (1)
• 3
  (1)
• 2.81
  (2)
• 8.13
  (4)
• 5.63
  (2)
• 7.19
  (2)
• 4
  (2)
• 3.25
  (2)
• 7.44
  (2)
• 7.81
  (1)

Material

• Zinc
  (95)
• Steel
  (144)
• Steel/Malleable Iron
  (4)
• Die Cast Zinc
  (23)
• Plastic
  (49)
• Aluminum
  (110)
• Porcelain, Steel
  (6)
• L(14.414) x W(5.350) x H(1.280)
  (1)
• Plated Steel
  (2)
• Galvanized Steel
  (2)
• Cast Aluminum
  (11)
• Steel, Aluminum
  (4)
• Non-metallic
  (8)
• UV-Rated Plastic
  (2)
• Zinc die-cast
  (2)
• Zinc Die Cast
  (41)
• Malleable Iron
  (361)
• Neoprene
  (5)
• Zinc Plated Steel
  (14)
• High Strength Zinc Alloy
  (3)
• Zinc Die Cast, Tin Plated Aluminum
  (11)
• Steel or 6/6 Nylon as noted
  (12)
• PVC (1900) and Aluminum (ME14)
  (1)
• Malleable Iron, Hot Dipped Galvanized
  (6)
• Porcelain
  (3)
• Porcelain wire holder, adjustable galvanized steel clamp
  (1)
• 26 Gauge Galvanized Steel Base, Elastomeric Compound Collar
  (1)
• 27 Gauge Galvanized Steel Base, Elastomeric Compound Collar
  (1)
• Elastomeric Base and Collar
  (2)
• Aluminum Wedge & Shell,6-1/2" Stainless Steel Bail
  (2)
• Fiberglass Reinforced Nylon
  (2)
• Screw Machined Steel
  (2)
• Malleable Iron, Zinc Plated
  (10)
• Thermoplastic
  (4)
• High Density Polyethylene (HDPE)
  (8)
• PVC
  (138)
• Copper
  (1)
• Brass
  (11)
• Almag 35 Aluminum
  (38)
• Grayloy-Iron
  (36)
• Turned Steel
  (1)
• Stainless Steel
  (9)
• Malleable Iron And Steel
  (13)
• Copperfree (4/10 Of 1 PCT Maximum) Aluminum
  (4)
• Iron
  (2)
• Body and Nut: Cooper-free Aluminum Die Cast, O-Ring: BUNA-N, Insulator: polypropylene, Ground Screw: Stainless Steel
  (5)
• Body and Nut: Cooper-free Aluminum Die Cast, O-Ring: BUNA-N, Insulator: polypropylene
  (4)
• Malleable Iron Body, Seal Cover And Filler Plug, Stainless Steel Drain/Breather
  (3)
• Gray Iron, Cover Screws: Steel
  (1)
• Malleable Iron Body, PVC Grommet, Steel Compression Washer
  (3)
• Malleable Or Ductile Iron
  (31)
• Malleable Or Ductile Iron, Phenolic Insulator
  (7)
• Castings: Malleable Or Ductile Iron With Alkyd Enamel Coating, Grommet: Neoprene, Pressure Rings: Steel, PVC Coated
  (1)
• Body Of Fitting: Malleable Or Ductile Iron
  (1)
• Copper-Free Aluminum
  (12)

Minimum Pack Quantity

• 10
  (2)
• 1
  (5)
• 25
  (4)
• 5
  (4)
• 2
  (1)

Mounting

• Push In
  (11)
• 0.84 IN Hole
  (1)
• 1.05 IN Hole
  (1)
• 1.31 IN Hole
  (1)
• 1.66 IN Hole
  (1)
• 2.37 IN Hole
  (1)
• Horizontal or Vertical
  (2)
• 3-tapped mounting pads allow for lug mounting options for tight spaces.
  (2)
• Screw
  (5)
• Top And/Or Bottom Of Enclosure Housing
  (3)
• Top Of Enclosure Housing
  (1)
• Bottom Of Enclosure Housing
  (1)
• 0.33
  (2)

Number Of Conductors

• 1 Cable
  (2)

Number Of Poles

• 3
  (5)
• 2
  (6)

Number Of Wires

• 4
  (4)
• 3
  (4)

Outside Diameter

• 1 IN
  (2)
• 1-1/4 IN
  (4)
• 1-1/2 IN
  (2)
• 2.13 IN
  (2)
• 2.38 IN
  (2)
• 2.88 IN
  (2)
• 3.56 IN
  (2)
• 4.31 IN
  (2)
• 4.56 IN
  (1)
• 5.13 IN
  (2)
• 6.31 IN
  (1)
• 7-1/2 IN
  (1)
• 1-1/8 IN
  (2)
• 1-3/4 IN
  (2)
• 2-1/8 IN
  (2)
• 2-1/2 IN
  (1)
• 3 IN
  (2)
• 3-5/8 IN
  (1)
• 4-1/2 IN
  (2)
• 5-1/8 IN
  (1)
• 5-1/4 IN
  (1)
• 6-3/8 IN
  (1)
• 0.84
  (7)
• 1.05
  (7)
• 1.315
  (7)
• 1.66
  (8)
• 2.375
  (9)
• 2.875
  (8)
• 3.5
  (8)
• 4
  (7)
• 4.5
  (7)
• 1.9
  (4)
• 1.99
  (2)
• 8.625
  (5)
• 6.27
  (4)
• 5.77
  (4)
• 4.39
  (4)
• 1.58
  (4)
• 3.89
  (4)
• 5.14
  (4)
• 1.89
  (6)
• 2.83
  (4)
• 1.96
  (4)
• 3.14
  (4)
• 9.39
  (1)
• 8.27
  (2)

Pallet Quantity

• 7680
  (1)
• 480
  (2)
• 22000
  (1)
• 12375
  (1)
• 5000
  (1)
• 5760
  (1)
• 24000
  (1)
• 14400
  (1)
• 4200
  (1)
• 2880
  (1)
• 2400
  (1)
• 1000
  (2)
• 800
  (1)
• 14000
  (1)
• 10000
  (1)
• 700
  (1)
• 567
  (1)
• 336
  (2)
• 17150
  (1)

Product Name

• 3/4 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 3-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 4 in. Flex Double Bite Saddle Connector
  (1)
• 3/8 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 1/2 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 1 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 3/4 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 3/8 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector, Insulated
  (2)
• 1/2 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 1 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 1-1/4 in. Flex Double Bite Saddle Connector
  (1)
• 1-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 2 in. Flex Double Bite Saddle Connector
  (1)
• 2-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 3 in. Flex Double Bite Saddle Connector
  (1)
• 1/2 in. EMT - Flex
  (1)
• 3/4 in. EMT - Flex
  (1)
• 2-1/2 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 3 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 3-1/2 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 4 in. Rigid/IMC 3-Piece Coupling
  (1)

Product Type

• Commercial Fittings
  (20)

Radius

• round
  (22)
• straight
  (63)
• 90 deg
  (2)

Replacement Parts Material

• Nylon (Face Module);Zinc Plated Steel (Flanged Casing);Brass (Inlet Blade);Copper (Terminal Block);Bronze (grounding Shunt)
  (8)
• Rubber (Seal)
  (3)

Size

• 2.063 in x 1.75 in x 1 in
  (1)
• 2.25 in x 2.125 in x 1.25 in
  (1)
• 1.688 in x 1.25 in x 1.266 in
  (2)
• 1.6 in x 0.9 in x 1.1 in
  (1)
• 2 in x 1.2 in x 1.3 in
  (1)
• 3.1 in x 3.45 in x 3.45 in
  (1)
• 3.33 in x 4.1 in x 4.1 in
  (1)
• 3.5 in x 4.588 in x 4.588 in
  (1)
• 3.56 in x 5.1 in x 5.1 in
  (1)
• L(2.860) x W(0.960) x H(1.000) IN
  (1)
• L(1.410) x W(0.850) x H(0.850) IN
  (5)
• L(3.125) x W(3.024) x H(1.150) IN
  (1)
• L(4.020) x W(4.842) x H(3.055) IN
  (1)
• L(5.236) x W(6.506) x H(4.555) IN
  (1)
• L(2.520) x W(0.810) x H(1.000) IN
  (1)
• L(2.600) x W(2.680) x H(2.000) IN
  (1)
• L(2.720) x W(3.120) x H(2.175) IN
  (1)
• L(3.110) x W(3.620) x H(2.560) IN
  (1)
• L(3.370) x W(4.250) x H(2.936) IN
  (1)
• L(4.340) x W(4.850) x H(3.352) IN
  (1)
• L(6.000) x W(6.620) x H(4.550) IN
  (1)
• L(7.800) x W(9.740) x H(6.215) IN
  (1)
• L(8.000) x W(10.500) x H(8.000) IN
  (1)
• L(9.250) x W(12.500) x H(8.000) IN
  (2)
• L(1.284) x W(0.850) x H(0.850) IN
  (1)
• L(7.625) x W(5.599) x H(1.875) IN
  (1)
• L(11.000) x W(1.750) x H(0.525) IN
  (1)
• L(4.875) x W(2.300) x H(2.300) IN
  (1)
• L(3.450) x W(2.300) x H(2.300) IN
  (1)
• L(14.414) x W(5.350) x H(1.280) IN
  (1)
• L(5.437) x W(1.781) x H(1.781) IN
  (1)
• L(3.400) x W(1.781) x H(1.781) IN
  (1)
• L(7.286) x W(5.350) x H(0.627) IN
  (1)
• L(7.069) x W(2.269) x H(1.255) IN
  (1)
• L(2.062) x W(2.985) x H(2.262) IN
  (1)
• L(3.156) x W(4.500) x H(3.572) IN
  (1)
• L(2.750) x W(2.950) x H(0.875) IN
  (1)
• L(6.214) x W(3.683) x H(2.475) IN
  (1)
• L(6.672) x W(5.040) x H(2.203) IN
  (1)
• L(12.500) x W(4.409) x H(1.700) IN
  (1)
• L(0.900) x W(0.900) x H(0.670) IN
  (1)
• L(1.220) x W(1.220) x H(0.710) IN
  (1)
• L(1.450) x W(1.450) x H(0.880) IN
  (1)
• L(1.735) x W(1.735) x H(1.015) IN
  (1)
• L(2.050) x W(2.050) x H(1.015) IN
  (1)
• L(2.312) x W(2.312) x H(1.250) IN
  (1)
• L(3.460) x W(1.222) x H(1.878) IN
  (1)
• L(1.010) x W(1.010) x H(0.492) IN
  (2)
• L(1.772) x W(1.605) x H(0.840) IN
  (3)
• L(1.290) x W(1.290) x H(0.579) IN
  (1)
• L(8.500) x W(2.125) x H(3.625) IN
  (1)
• L(8.500) x W(4.125) x H(5.625) IN
  (1)
• L(8.500) x W(6.125) x H(7.625) IN
  (1)
• L(2.421) x W(2.593) x H(0.812) IN
  (1)
• L(2.500) x W(3.000) x H(1.250) IN
  (1)
• L(2.625) x W(3.812) x H(1.650) IN
  (1)
• L(3.750) x W(3.562) x H(1.750) IN
  (1)
• L(4.125) x W(4.093) x H(2.312) IN
  (1)
• L(12.750) x W(4.982) x H(1.720) IN
  (1)
• L(2.154) x W(1.605) x H(0.950) IN
  (1)
• L(6.187) x W(6.000) x H(2.500) IN
  (1)
• L(2.012) x W(2.012) x H(2.085) IN
  (1)
• L(1.057) x W(1.057) x H(0.812) IN
  (1)
• L(1.029) x W(1.029) x H(1.289) IN
  (1)
• L(1.271) x W(1.271) x H(1.289) IN
  (1)
• L(0.965) x W(0.965) x H(1.031) IN
  (1)
• L(1.125) x W(1.125) x H(1.340) IN
  (1)
• L(1.200) x W(1.200) x H(1.510) IN
  (1)
• L(1.500) x W(1.500) x H(1.637) IN
  (1)
• L(1.300) x W(1.300) x H(1.236) IN
  (1)
• L(5.027) x W(5.027) x H(2.340) IN
  (1)
• L(6.758) x W(6.758) x H(2.816) IN
  (1)
• L(7.567) x W(7.567) x H(2.890) IN
  (1)
• L(1.515) x W(1.515) x H(1.287) IN
  (1)
• L(6.000) x W(4.250) x H(2.000) IN
  (1)
• L(1.800) x W(1.800) x H(1.352) IN
  (1)
• L(2.280) x W(2.280) x H(1.462) IN
  (1)
• L(2.453) x W(2.453) x H(1.580) IN
  (1)
• L(2.881) x W(2.881) x H(1.584) IN
  (1)
• L(3.320) x W(3.320) x H(1.900) IN
  (1)
• L(4.040) x W(4.040) x H(2.032) IN
  (1)
• L(4.560) x W(4.560) x H(2.242) IN
  (1)
• L(8.500) x W(1.625) x H(3.125) IN
  (1)
• L(8.500) x W(3.125) x H(4.625) IN
  (1)
• L(8.500) x W(5.125) x H(6.625) IN
  (1)
• L(3.537) x W(2.050) x H(2.664) IN
  (1)
• L(4.890) x W(3.140) x H(4.090) IN
  (1)
• L(1.648) x W(1.648) x H(0.683) IN
  (1)
• L(1.092) x W(1.092) x H(0.954) IN
  (1)
• L(1.473) x W(1.179) x H(0.840) IN
  (1)
• L(2.388) x W(2.035) x H(0.950) IN
  (1)
• L(1.473) x W(1.244) x H(0.840) IN
  (2)
• L(2.467) x W(2.115) x H(0.950) IN
  (1)
• L(2.901) x W(2.750) x H(3.700) IN
  (1)
• L(2.156) x W(1.885) x H(2.575) IN
  (1)
• L(2.466) x W(2.105) x H(3.093) IN
  (1)
• L(3.218) x W(3.235) x H(4.250) IN
  (1)
• L(3.281) x W(3.890) x H(5.000) IN
  (1)
• L(2.210) x W(1.514) x H(0.840) IN
  (1)
• L(3.054) x W(2.717) x H(1.200) IN
  (1)
• L(2.496) x W(1.709) x H(1.300) IN
  (1)
• L(1.610) x W(1.450) x H(1.583) IN
  (1)
• L(2.084) x W(1.858) x H(1.995) IN
  (1)
• L(2.400) x W(2.100) x H(2.025) IN
  (1)
• L(2.917) x W(2.560) x H(2.150) IN
  (2)
• L(2.496) x W(1.819) x H(0.854) IN
  (2)
• L(2.496) x W(1.739) x H(0.854) IN
  (2)
• L(1.000) x W(1.000) x H(0.540) IN
  (1)
• L(2.036) x W(2.668) x H(1.727) IN
  (1)
• L(2.075) x W(1.252) x H(1.000) IN
  (1)
• L(2.500) x W(2.386) x H(0.950) IN
  (1)
• L(2.560) x W(1.716) x H(2.020) IN
  (1)
• L(2.615) x W(2.386) x H(1.200) IN
  (1)
• L(1.839) x W(1.060) x H(0.976) IN
  (1)
• L(0.972) x W(0.942) x H(0.919) IN
  (1)
• L(1.290) x W(1.290) x H(1.004) IN
  (1)
• L(1.387) x W(1.123) x H(1.123) IN
  (2)
• L(1.432) x W(1.123) x H(1.123) IN
  (2)
• L(3.055) x W(2.752) x H(1.135) IN
  (1)
• L(1.312) x W(1.312) x H(0.796) IN
  (1)
• L(1.592) x W(1.592) x H(0.900) IN
  (1)
• L(2.250) x W(2.250) x H(0.900) IN
  (1)
• L(2.581) x W(2.581) x H(0.900) IN
  (1)
• L(3.124) x W(3.124) x H(0.930) IN
  (1)
• L(2.750) x W(2.750) x H(1.995) IN
  (1)
• L(7.750) x W(7.750) x H(1.995) IN
  (1)
• L(2.190) x W(1.135) x H(1.409) IN
  (1)
• L(10.5) x W(10.5) x H(0.75) IN
  (1)
• L(2.046) x W(1.910) x H(1.188) IN
  (1)
• L(2.278) x W(2.226) x H(1.188) IN
  (1)
• L(2.557) x W(2.504) x H(1.188) IN
  (1)
• L(3.092) x W(3.095) x H(1.498) IN
  (1)
• L(3.822) x W(3.890) x H(1.498) IN
  (2)
• L(4.836) x W(4.427) x H(1.762) IN
  (2)
• L(5.057) x W(5.057) x H(1.763) IN
  (2)
• L(5.961) x W(5.561) x H(1.763) IN
  (2)
• L(6.461) x W(6.063) x H(1.762) IN
  (2)
• L(1.330) x W(1.605) x H(2.623) IN
  (1)
• L(1.330) x W(1.456) x H(2.413) IN
  (1)
• L(0.890) x W(1.422) x H(0.890) IN
  (1)
• L(1.250) x W(1.125) x H(1.125) IN
  (1)
• 1/2 in
  (101)
• 3/4 in
  (115)
• 1 in
  (101)
• 2 in
  (100)
• 2 1/2 in
  (10)
• 3 in
  (74)
• 3 1/2 in
  (9)
• 1 1/4 in
  (13)
• 1 1/2 in
  (13)
• 3-2 Cable
  (1)
• 4 in
  (63)
• 3-#2 in
  (1)
• 3-#3/0, #4/0 in
  (1)
• 2 Inch Conduit, 1-1/4 Inch Cap in
  (1)
• 2-1/2 Inch Conduit, 2 Inch Cap in
  (1)
• 1-1/4 in
  (67)
• 1-1/2 in
  (78)
• 1 1/4 - 1 1/2 in
  (1)
• 2 1/2 - 3 in
  (1)
• 3 1/2 - 4 in
  (1)
• 5 in
  (25)
• 2-1/2 in
  (52)
• 3-1/2 in
  (30)
• 1 1/4-1 1/2 in
  (1)
• 3/8 in
  (9)
• 6 in
  (21)
• 2-#8,6,4,2 in
  (1)
• 3/8" in
  (1)
• 0.75 in
  (1)
• 0.5 IN
  (2)
• #8 Solid - #1 Stranded
  (1)
• #1/0 - #4/0 Stranded
  (1)
• #4 - 0 (CABLE RANGE)
  (1)
• 1/4 X 1-11/16 IN
  (1)
• 5/16 X 2 IN
  (1)
• 3/8 X 2-1/4 IN
  (1)
• 1-1/4 - 3 IN
  (1)
• 3/8-1/2 IN
  (1)
• 3/4-1 IN
  (1)
• 1/2 EMT, 3/4 EMT IN
  (1)
• 1 IN EMT, 3/3 AWG SEU
  (1)
• 1-1/4 IN EMT, 2/3 AWG SEU
  (1)
• 1-1/2 EMT IN
  (1)
• 2 EMT IN
  (1)
• 3 x 3-1 AWG
  (1)
• 3 x 2/0-4/0 AWG
  (1)
• 4-3/4 IN
  (1)
• 2-3/4 IN
  (1)
• 3 x 2 IN
  (1)
• 3 x 2-1/2 IN
  (1)
• 4 x 3 IN
  (1)
• 5 x 4 IN
  (1)
• 6 x 5 IN
  (1)
• 2 x 1-1/4 IN
  (1)
• 1/2 KO IN
  (1)
• 2 Stranded AWG
  (1)
• 4 Solid AWG
  (1)
• 4 Stranded AWG
  (1)
• 6 Solid AWG
  (1)
• 6 Stranded AWG
  (1)
• 8 Solid AWG
  (1)
• 8 Stranded AWG
  (1)
• 2.5 IN
  (2)
• 3.5 IN
  (2)
• 1-/2 IN
  (1)
• 1/2 to 3/4 IN
  (1)
• 3/4 X 1 IN
  (2)
• 1 to 1 1/4 IN
  (1)
• 1/2 X 1 IN
  (1)
• 1 X 1-1/2 IN
  (1)
• 1-1/4 X 2 IN
  (1)
• 1-1/2 X 2 IN
  (1)
• 2 X 2-1/2 IN
  (1)
• 3 X 4 IN
  (1)
• 4 X 5 IN
  (1)
• 5 X 6 IN
  (1)
• 2-1-/2 IN
  (1)
• M50
  (2)
• M16
  (1)
• M40
  (1)
• M20
  (1)
• 1/2
  (2)
• 3/4
  (2)
• Trade Size 3.00 IN
  (1)
• Trade Size 1.50 IN
  (1)
• 5/8 IN
  (1)
• 11/16 IN
  (1)
• 13/16 IN
  (1)
• Trade Size 0.75 IN
  (1)
• Trade Size 1.00 IN
  (1)
• 1 IN Inside Diameter X 1.315 Outside Diameter (Steel Pipe Or Conduit), 1-1/4 IN Inside Diameter X 1-3/8 IN Outside Diameter (Copper Tubing)
  (1)
• Trade Size 2.00 IN
  (1)

Specifications

• UL Listed
  (2)

Temperature Rating

• 105 degree C rated
  (1)
• 105 C
  (2)
• 105?C
  (5)
• 105 Degree C
  (9)
• 2.86
  (1)
• 2.52
  (1)

Terminal Size

• 062 IN
  (8)

Thickness

• 0.100 IN
  (8)

Thread Per Inch

• 14
  (4)
• 11.5
  (9)
• 8
  (16)
• 3.04
  (1)

Trade Size

• 1/2 in
  (28)
• 3/4 in
  (21)
• 2.5 in
  (15)
• 3 in
  (27)
• 3.5 in
  (13)
• 4 in
  (20)
• 3/8 in
  (30)
• 2 IN
  (38)
• 2-1/2 IN
  (9)
• 1 IN
  (40)
• 1-1/4 IN
  (15)
• 1-1/2 IN
  (12)
• 3-1/2 IN
  (6)
• 1-1/4 to 3 IN
  (2)
• 2 Conduit IN
  (1)
• 1-1/2 pipe IN
  (1)
• 3 pipe IN
  (1)
• 5 pipe IN
  (1)
• 1/2 EMT and 3/4 EMT IN
  (1)
• 1 EMT 3/3 SEU IN
  (1)
• 1-1/4 EMT 2/3 SEU IN
  (1)
• 1-1/2 EMT 4/0 SEU IN
  (1)
• 2-1/2 Mast IN
  (1)
• 5 IN
  (10)
• 6 IN
  (8)
• 1 pipe IN
  (1)
• 2 pipe IN
  (1)
• 4 pipe IN
  (1)
• Fits 1-3/4 to 4-1/4 hole IN
  (1)
• Fits 1-3/4 to 6-1/4 hole IN
  (1)
• Fits 3-3/4 to 9-1/4 hole IN
  (1)
• 0.5 in
  (19)
• 0.75 in
  (25)
• 1.25 in
  (19)
• 1.5 in
  (21)
• 3-2 Cable in
  (1)
• 3-#2 in
  (1)
• 3-#3/0, #4/0 in
  (1)
• 2 Inch Conduit, 1-1/4 Inch Cap in
  (1)
• 2-1/2 Inch Conduit, 2 Inch Cap in
  (1)
• 1.25 to 1.5 in
  (1)
• 2-1/2 to 3 in
  (1)
• 3-1/2 to 4 in
  (1)
• 1 1/4-1 1/2 in
  (1)
• 2-#8,6,4,2 in
  (1)
• 0.75
  (1)
• 12 x 12 x 4 IN
  (1)
• Large Hub: 3/4 IN, Small Hub: 1/2 IN
  (2)
• Large Hub: 1 IN, Small Hub: 3/4 IN
  (2)
• Large Hub: 1-1/2 IN, Small Hub: 3/4 IN
  (2)
• Large Hub: 1-1/2 IN, Small Hub: 1-1/4 IN
  (1)
• Large Hub: 2 IN, Small Hub: 3/4 IN
  (1)
• Large Hub: 2 IN, Small Hub: 1 IN
  (1)
• Large Hub: 2 IN, Small Hub: 1-1/2 IN
  (1)
• Large Hub: 1 IN, Small Hub: 1/2 IN
  (1)
• Large Hub: 1-1/4 IN, Small Hub: 3/4 IN
  (1)
• Large Hub: 1-1/2 IN, Small Hub: 1 IN
  (2)
• Large Hub: 3 IN, Small Hub: 2 IN
  (1)
• 1/2 - 3/4 IN
  (1)

Trade Size - Metric

• 21
  (25)
• 16
  (13)
• 27
  (13)
• 53
  (1)

Type

• 1-Hole AC/MC Strap
  (5)
• Malleable iron insert
  (9)
• Tubing clamp and pipe guide
  (26)
• Strut fittings and accessories
  (3)
• Adjustable fitting
  (14)
• Conduit and cable support
  (4)
• Post base
  (44)
• Splice plate
  (16)
• Connector plate
  (10)
• Hardware and accessories
  (38)
• Pipe clamp
  (56)
• Channel nut
  (4)
• Clevis hanger
  (65)
• Support fastener
  (4)
• Bracket
  (62)
• Hinged extension split pipe clamp
  (23)
• Break apart conduit clamp
  (10)
• Adjustable beam clamp
  (6)
• Beam clamps
  (40)
• Beam clamp with extension
  (5)
• Pole bracket
  (7)
• Vibration and cushion clamp
  (54)
• Isolation pipe
  (1)
• Suspension fastener
  (3)
• Bridle ring and accessories
  (15)
• Side beam connector
  (2)
• Side beam angle clip
  (8)
• Side beam bracket
  (2)
• Vibra-Cushion
  (1)
• Strap hanger
  (9)
• Beam clamp
  (1)
• End cap
  (57)
• C-clamp
  (25)
• Welded beam attachment
  (13)
• T-bar fastener and spacers
  (13)
• Stud fastener and accessories
  (3)
• Hanger
  (49)
• Purlin hanger
  (6)
• Beam fasteners
  (13)
• Pipe support with U-bolt
  (5)
• Slip on lock nut
  (2)
• Cable accessory and kit
  (3)
• Corner angle
  (68)
• Conduit to beam fastener
  (58)
• Plastic coated clevis hanger
  (11)
• Light duty clevis hanger
  (20)
• Vee bottom clevis hanger
  (2)
• Pipe support and pipe/socket clamp
  (2)
• Adjustable yoke pipe roll
  (26)
• Pipe roll with sockets
  (30)
• Roller stand
  (14)
• Adjustable roller stand with base plate
  (4)
• Roller chair
  (21)
• Adjustable roller support
  (16)
• Roller support
  (9)
• Adjustable swivel hanger for copper tubing
  (12)
• Ring and bolt hanger
  (10)
• Standard U-bolt
  (33)
• Extension split pipe clamp
  (27)
• Ceiling flange
  (5)
• Eye nut
  (9)
• Clevis
  (1)
• Extension piece
  (5)
• Rod coupling
  (14)
• Hanger adjuster
  (2)
• Troffer fastener
  (2)
• Cover plate
  (8)
• Conduit fastener
  (21)
• Conduit to stud fastener
  (13)
• T-bar fastener and spacer bracket
  (6)
• Conduit to rod fastener
  (6)
• Conduit trapeze fastener
  (2)
• Jack chain and hook
  (2)
• Rod to beam hanger
  (8)
• Beam fastener
  (6)
• Bracket fastener
  (7)
• Drive pin and support fastener
  (3)
• Conduit to conduit fastener
  (6)
• Rod and wire fastener
  (3)
• Cable fastener
  (3)
• Continuous concrete insert for B22 channel
  (2)
• Continuous concrete insert for B32 channel
  (2)
• Square nut
  (8)
• Springless channel nut
  (13)
• Nut
  (11)
• Spring nut
  (46)
• Strut channel, nuts, all threaded rod
  (5)
• Mini channel spring nut
  (4)
• Springless mini channel nut
  (2)
• Stud nut with spring
  (6)
• Springless stud nut
  (1)
• Stud nut
  (2)
• Hanger rod stiffener
  (1)
• Hex head cap screw
  (16)
• Hex head screw
  (26)
• Slotted hex head machine screw
  (9)
• Slotted round head machine screw
  (3)
• Flat washers
  (8)
• Lock washer
  (5)
• Hex nut
  (5)
• Offset fitting
  (12)
• U-support
  (20)
• Shelf angle and brackets
  (16)
• Corner connection
  (15)
• Wing connection
  (14)
• Tee and cross flat fitting
  (7)
• Corner plate
  (16)
• Gusset plate
  (9)
• Swivel plate
  (2)
• Open angle
  (21)
• Closed angle
  (10)
• Clevis fitting
  (21)
• Slotted bracket
  (14)
• Clevis bracket
  (10)
• Square washer
  (37)
• I-beam and zee clamp
  (4)
• Reel rack support
  (4)
• Channel hanger
  (1)
• Pipe roller
  (9)
• Corner gusset
  (15)
• Knee brace
  (12)
• Trolley beam support
  (4)
• Junction box
  (5)
• Wiring stud
  (1)
• Three stud ring connection
  (1)
• Suspension member with beam clamp
  (1)
• Z-support
  (3)
• Ladder rung
  (1)
• Right angle clamp
  (13)
• Fluorescent fixture nut
  (1)
• Swivel hanger
  (7)
• Conduit connection plate
  (2)
• U-washer
  (7)
• Trolley assembly
  (4)
• U-bolt and J-bolt
  (11)
• U-bolt
  (11)
• Two hole bus duct
  (2)
• Stair support
  (1)
• Pipe coupling fitting
  (1)
• Fiber wire retainer
  (1)
• Joiner
  (11)
• Beam clamp assembly
  (11)
• Strut mounted pipe guide
  (5)
• Multi-grip and offset pipe clamp
  (15)
• Thinwall conduit clamp
  (15)
• Pre-assembled thinwall conduit clamp
  (13)
• O.D. pipe and conduit clamp
  (114)
• Pre-assembled O.D. pipe and conduit clamp
  (64)
• Pipe clamps and accessories
  (2)
• Standard pipe clamp
  (13)
• Conduit strut clamp
  (15)
• Spot insert
  (2)
• Cable saddle
  (2)
• All threaded rod
  (31)
• Riser clamp
  (18)
• Copper tubing riser clamp
  (9)
• One hole EMT strap
  (5)
• One hole rigid conduit/pipe strap
  (8)
• Slotted angle
  (7)
• Double conveyor nut
  (1)
• Fixture bar
  (1)
• Conduit spacers
  (18)
• Seismic retrofit bracket
  (3)
• Drive pin fasteners
  (3)
• Single cable hook
  (1)
• Drive pin fastener
  (1)
• Wire rope and clamps
  (3)
• Insert with clamp
  (34)
• Concrete screws and bolts
  (4)
• Other enclosure accessories
  (1)
• Washer
  (7)
• Spring nut mini channel
  (1)
• Vibration isolation pads
  (9)
• Ribbed neoprene steel vibration pad
  (13)
• Double bolt pipe clamp
  (1)
• Box mounting bracket and accessories
  (6)
• Open frame racks
  (1)
• Runway retaining post
  (1)
• Box support bracket and accessories
  (2)
• Deck hangers
  (1)
• Deck hanger bracket
  (9)
• Pipe rollers and supports
  (14)
• Long pattern pipe roller
  (1)
• Twist fastener
  (2)
• 1-Hole Steel Strap
  (2)
• Snap-on
  (33)
• Push-In Connector
  (9)
• Set-Screw
  (2)
• Clamp-On
  (10)
• Wire Holder
  (5)
• Channel Bar
  (1)
• Universal Pipe Support
  (4)
• Wire Holder with Hanger
  (1)
• Cable Cap
  (1)
• Sill Plate
  (9)
• Threaded Bushing
  (1)
• 1-Hole Aluminum Strap
  (6)
• Connector
  (16)
• Concrete Pipe Sleeve
  (5)
• Service Entrance Hood
  (4)
• Push-In Connectors
  (1)
• Floor Box
  (17)
• Locknuts
  (38)
• Pull Caps
  (6)
• Connectors
  (38)
• Entrance Caps
  (29)
• Entrance Cap
  (3)
• Compression
  (5)
• Conduit Body Covers
  (7)
• Distribution Rings
  (2)
• Threaded Hubs
  (4)
• Box Supports
  (2)
• Roof Flashings
  (9)
• Entrance Heads
  (6)
• E-Z LOCK
  (2)
• Double Snap
  (2)
• Coupling
  (14)
• Type C
  (14)
• Hub
  (3)
• Locknut
  (9)
• Bonding and Grounding
  (2)
• Adjustable Endstop
  (7)
• DUPLEX JMC/TECK
  (1)
• EZ-LOCK
  (1)
• Filler Plug
  (1)
• Duplex E-Z LOCK Snap-In MC Connector
  (2)
• Insulated Duplex E-Z LOCK Snap-In MC Connector
  (2)
• SNAP IN BLANKS
  (6)
• Service Entrance Cable Cap
  (2)
• Clamp-On Service Entrance Cap
  (3)
• SERVICE ENTRANCE CAPS CLAMP-ON ALUMINUM
  (2)
• Service Entrance Mast Head-Slip Fitter
  (2)
• SILL PLATES
  (1)
• 2-1/2" WATERTIGHT HUBS ZINC
  (1)
• 3" WATERTIGHT HUBS ZINC
  (1)
• 3-1/2" WATERTIGHT HUBS ZINC
  (1)
• 4" WATERTIGHT HUBS ZINC
  (1)
• Snap-In Blank
  (6)
• 1/2" FLOOR FLANGES MALLEABLE
  (1)
• 3/4" FLOOR FLANGES MALLEABLE
  (1)
• 1" FLOOR FLANGES MALLEABLE
  (1)
• 1-1/4" FLOOR FLANGES MALLEABLE
  (1)
• 1-1/2" FLOOR FLANGES MALLEABLE
  (1)
• 2" FLOOR FLANGES MALLEABLE
  (1)
• SERVICE INSULATOR WIRE HOLDERS
  (3)
• MAST CLAMP WIRE HOLDERS
  (1)
• GALVANIZED FLASHING NEOPRENE SEAL
  (2)
• NEOPRENE FLASHING
  (2)
• MAST SUPPORT ADJUSTABLE CLAMP STEEL
  (1)
• WEDGE CLAMPS
  (2)
• 1/2" CORD GRIPS NON-METALLIC
  (1)
• 3/4" CORD GRIPS NON-METALLIC
  (1)
• WATERTIGHT CONNECTORS STEEL
  (2)
• 1/2" RIGID SPEED NIPPLES MALLEABLE
  (1)
• 3/4" RIGID SPEED NIPPLES MALLEABLE
  (1)
• 1" RIGID SPEED NIPPLES MALLEABLE
  (1)
• 1-1/4" RIGID SPEED NIPPLES MALLEABLE
  (1)
• 1-1/2" RIGID SPEED NIPPLES MALLEABLE
  (1)
• 2" RIGID SPEED NIPPLES MALLEABLE
  (1)
• 2-1/2" RIGID SPEED NIPPLES MALLEABLE
  (1)
• 3" RIGID SPEED NIPPLES MALLEABLE
  (1)
• 3-1/2" RIGID SPEED NIPPLES MALLEABLE
  (1)
• 4" RIGID SPEED NIPPLES MALLEABLE
  (1)
• 12" x 12" x 4" PVC JUNCTION BOXES
  (1)
• COMBINATION CONDUIT BODIES LR-TYPE
  (2)
• COMBINATION CONDUIT BODIES T-TYPE
  (2)
• COMBINATION CONDUIT BODIES LB-TYPE
  (2)
• COMBINATION CONDUIT BODIES C-TYPE
  (2)
• TAKE ALL BOX CONNECTORS ZINC
  (6)
• COMBINATION CONDUIT BODIES LL-TYPE
  (2)
• 3/4" DUPLEX CABLE CONNECTOR PLASTIC
  (1)
• 3/4" CABLE CONNECTOR PLASTIC
  (1)
• MAST SUPPORT CLAMP ALUMINUM
  (1)
• 2" EMT INSULATING BUSHINGS PLASTIC
  (1)
• 2-1/2" EMT INSULATING BUSHINGS PLASTIC
  (1)
• 3" EMT INSULATING BUSHINGS PLASTIC
  (1)
• 1" EMT INSULATING BUSHINGS PLASTIC
  (1)
• 1-1/4" EMT INSULATING BUSHINGS PLASTIC
  (1)
• 1/2" EMT INSULATING BUSHINGS PLASTIC
  (1)
• 3/4" EMT INSULATING BUSHINGS PLASTIC
  (1)
• 4" EMT INSULATING BUSHINGS PLASTIC
  (1)
• NM Clamp Connector
  (10)
• Box Spacing Connector
  (2)
• Compression Rigid Connector
  (26)
• Rigid Floor Flange Plate
  (6)
• NM Box Connector
  (4)
• EMT/Rigid Clamp Back
  (24)
• Set Screw Rigid Connector
  (8)
• Service Entrance Cap with Split Insulator
  (2)
• Service Entrance Cap
  (33)
• Conduit Support
  (1)
• SE Mast Kit
  (3)
• Female Adapter
  (12)
• Male Adapter
  (12)
• Meter Offset
  (2)
• Offset
  (1)
• Box Adapter
  (9)
• End Bell
  (12)
• Poly Plug
  (5)
• Type LB
  (10)
• Type LL
  (10)
• Type LR
  (10)
• Type T
  (10)
• Type E
  (10)
• Floor Base Box
  (2)
• Expansion Joint
  (4)
• Reducer Bell to Plain End
  (5)
• Rigid Offset Reducer
  (1)
• ENT Terminal Adapter
  (3)
• Inter System Bonding Bridge
  (1)
• Meter Hub
  (5)
• Round Cover
  (1)
• Kenny Clamp
  (7)
• Straight Connector
  (11)
• 45 DEG Connector
  (3)
• 90 DEG Connector
  (4)
• PVC Fittings & Elbows
  (2)
• Compression Type Rigid Connector
  (2)
• Set Screw Type Connector
  (2)
• Rigid Watertight Hub
  (2)
• Rigid Cable Support Body
  (6)
• Set-Screw Connector
  (9)
• Watertight Hubs
  (1)
• Straight Insulated Throat Hub With Bonding Screw
  (10)
• Recessed Head Close-Up Plug
  (13)
• EY Series 25 PCT Fill Vertical And Horizontal Conduit Sealing Fitting
  (17)
• EY Series 25 PCT Fill Vertical And Horizontal Conduit Sealing Fitting With Removable Nipple
  (16)
• EYS Series 25 PCT Fill Vertical Conduit Sealing Fitting
  (11)
• EYS Series 25 PCT Fill Vertical Conduit Sealing Fitting With Removable Nipple
  (6)
• EYDM Series 25 PCT Fill Vertical Conduit Drain Sealing Fitting With Removable Nipple
  (13)
• EYD Series 25 PCT Fill Vertical Conduit Drain Sealing Fitting
  (6)
• EYD Series 25 PCT Fill Vertical Conduit Drain Sealing Fitting With Removable Nipple
  (6)
• EYS Series 25 PCT Fill Vertical And Horizontal Sealing Fitting
  (9)
• EYS Series 25 PCT Fill Vertical And Horizontal Sealing Fitting With Removable Nipple
  (9)
• Enlarger
  (1)
• Universal Drain And Breather
  (4)
• Compression Connector
  (10)
• Square Head Close-Up Plug
  (10)
• Insulated Compression Connector
  (3)
• Knockout Blank
  (6)
• EY Series 40 PCT Expanded Fill Vertical And Horizontal Conduit Sealing Fitting
  (16)
• EY Series 40 PCT Expanded Fill Vertical Drain Sealing Fitting
  (11)
• Sealing Hub
  (9)
• EYS Series 25 PCT Fill Vertical Sealing Fitting
  (3)
• EYS Series 25 PCT Fill Vertical Sealing Fitting With Removable Nipple
  (3)
• Bell Reducer Coupling
  (15)
• Drain
  (5)
• Breather
  (1)
• Bushed Nipple
  (12)
• Insulated Bushed Nipple
  (9)
• ESU Series 25 PCT Fill Vertical And Horizontal Conduit Sealing Fitting
  (3)
• Bar Head Close-Up Plug
  (2)
• Straight Insulated Throat Hub
  (10)
• 757 Series Hexagon Head Stopper Plug
  (4)
• Drain Breather
  (1)
• Insulated Hub
  (5)
• Aluminum Die Cast, Watertight Hubs, Insulated and Gasketed
  (9)
• Insulated Hub With Grounding Screw
  (4)
• Type CH Space-Maker Conduit Hub
  (9)
• Type CHT Space-Maker Conduit Hub
  (9)
• Type DB Drain And Breather
  (2)
• Type EYAX Vertical/Horizontal Sealing Fitting
  (3)
• Type EF Concrete Slab Electroform Straight Conduit Insert
  (3)
• Type EFL Concrete Slab Electroform 90 DEG Conduit Insert
  (2)
• Type EY Vertical Sealing Fitting
  (6)
• Type EYA Vertical/Horizontal Sealing Fitting
  (9)
• Type EYAM Vertical/Horizontal Sealing Fitting
  (8)
• Type EYD Vertical Drain/Sealing Fitting
  (3)
• Type FF 90 DEG Raintight Corner Pulling Elbow
  (7)
• Type CHM Raintight Conduit Hub
  (10)
• Type CHM-T Raintight Conduit Hub
  (9)
• Type CHM-T Conduit Hub Threaded for Rigid Conduit and IMC
  (1)
• Type KO Knockout Plug
  (5)
• Type KO Knockout Closure
  (1)
• Type LBY 90 DEG Capped Conduit Short Elbow
  (4)
• Type LBY 90 Degree Capped Conduit Elbow
  (1)
• Type LBH Pulling Elbow
  (1)
• Type ME-S Male Enlarger
  (3)
• Type MF 90 DEG Raintight Corner Pulling Elbow
  (6)
• Type PLG Patented Threaded Insert Plug
  (7)
• Type PLG Internal Recessed Threaded Insert Plug
  (12)
• Type SE Watertight Service Entrance And UF Cable Connector
  (3)
• Type TNS Threaded Conduit End Bell
  (6)
• Type 7 Bushed Conduit Nipple
  (11)
• Type 7 Insulated Throat Bushed Conduit Nipple
  (6)
• Type 8 90 DEG Short Conduit Elbow
  (3)
• Type 9 90 DEG Bushed Conduit Elbow
  (3)
• Type 17 Service Entrance Head
  (7)
• Type 28 Rigid Connector
  (11)
• Type 28 Set Screw Rigid Conduit Connectors
  (2)
• Type 31 Gland Compression Rigid Connector
  (19)
• Type FSK Single Thru wall And Floor Seal
  (1)
• Multiple Segment Plug Type R - Body Only
  (8)
• Multiple Segment Plug Type R
  (5)
• One Piece Plug Type S - Body Only
  (8)
• One Piece Plug Type S
  (4)
• Type S Threaded Cable Support
  (1)
• Type EY-A Vertical/Horizontal Sealing Fitting
  (1)
• Type EYA-A Vertical/Horizontal Sealing Fitting
  (3)
• Type EYA-A Aluminum Vertical/Horizontal Sealing Fittings
  (1)
• Type EYM Vertical Sealing Fitting
  (1)
• Type DBB Drain And Breather
  (1)